nVent HOFFMAN A72XN7318FSLP Low Profile Type 1 Disconnect Enclosures Instruction Manual
- June 12, 2024
- nVent HOFFMAN
Table of Contents
nVent HOFFMAN A72XN7318FSLP Low Profile Type 1 Disconnect Enclosures
Product Information
The product is an enclosure designed for the installation of disconnect devices, external mounting feet, or conduit hubs that have the same environmental rating as the enclosure. It is available in free-standing configuration with one or two doors. The enclosure depth varies depending on the model, ranging from 12 inches to 24 inches.
Product Usage Instructions
- Ensure that only listed or recognized disconnect devices, external mounting feet, or conduit hubs with the same environmental rating as the enclosure are installed in any opening.
- Follow the installation instructions provided by the device manufacturer to ensure compliance.
- For variable depth disconnects, use the connecting rods provided and cut them to the appropriate length to fit the enclosure depth. Refer to the table below and the manufacturer’s instructions for guidance.
Enclosure Depth and Flange to Panel DepthEnclosure Depth| C Flange to Panel
Depth
---|---
12 inches| 9.15 inches
18 inches| 15.15 inches
24 inches| 21.15 inches
Consult the manufacturer’s mounting information for the specific disconnect switch or circuit breaker to be installed.
Dimension
NOTICE: To maintain the environmental rating of this enclosure, install in any opening, only listed or recognized disconnect devices, external mounting feet, or conduit hubs that have the same environmental rating as the enclosure. Install in compliance with the installation instructions of the device.
Bulletin| Enclosure Description| Enclosure Depth
“C”| Flange to Panel Depth “D” (1)
---|---|---|---
A38P
| Free−Standing, one and two−door| 12| 9.15
18| 15.15
24| 21.15
- This depth dimension is used to calculate the length of the connecting rod(s).
PH: 763 422 2211
nVent.com/HOFFMAN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>