BENZHUO MICY1 Magic Wand Rf Transmitter User Manual

BENZHUO MICY1 Magic Wand Rf Transmitter

Product Information

The Magic Wand RF Transmitter is a wireless device that allows you to control various electronic devices using radio frequency signals. It is designed to work with compatible receivers and offers convenient and remote control functionality.

Product Usage Instructions

1. Battery Safety:
   Never throw batteries into a fire or expose them to fire or other heat sources. This can cause the batteries to explode or leak, posing a safety hazard. Always handle batteries with care.

2. Battery Disposal:
   Dispose or recycle spent or discharged batteries in compliance with all applicable laws and regulations. Contact your local solid waste authority for detailed information on proper disposal methods.

3. Compatibility:
   Ensure that the Magic Wand RF Transmitter is compatible with the electronic devices you intend to control. Refer to the product manual or contact the manufacturer for compatibility information.

4. Installation:
   Follow the provided installation instructions to set up the Magic Wand RF Transmitter. This may involve connecting it to a power source, configuring settings, and pairing it with compatible receivers.

5. Operating Instructions:
   Once installed, use the Magic Wand RF Transmitter by pressing the appropriate buttons or switches to send radio frequency signals to the compatible receivers. Refer to the product manual for specific instructions on how to control different devices.

6. Maintenance:
   Keep the Magic Wand RF Transmitter clean and free from dust or debris. Use a soft, dry cloth to wipe it down as needed. Avoid using harsh chemicals or abrasive materials that may damage the device.

7. Troubleshooting:
   If you encounter any issues with the Magic Wand RF Transmitter, refer to the troubleshooting section of the product manual for possible solutions. If the problem persists, contact customer support for further assistance.

By following these guidelines, you can safely and effectively use the Magic Wand RF Transmitter to control your electronic devices wirelessly.

Magic wand rf transmitter

Package List

1.  Magic wand (transmitter) 1PCS
2. User manual 1PCS

Magic wand battery replacement

1. Unscrew the battery cover screw
2. Put 2xAA batteries into the battery holder, facing the “+” and ” “–” marks of the battery holder
3. After the battery is correctly installed, close the battery cover and tighten the screws

Use of Magic wand

1. When using the Magic wand, please pair it with the electric appliance to be controlled
2. Press the magic wand ON/OFF button, or shake the magic wand, the snowflake lights will flicker, the music will sound, and the electric appliance will turn on
3. Press the magic wand ON/OFF button again or shake the wand, and the magic wand music will sound, the snowflake lights will flicker, and the electric appliance will turn off.
4. Long press the button on the magic wand to turn on and off the sound of the wand. Battery handling and usage:

WARNING : Keep batteries away from children and pets.

Follow the battery manufacturer’s safety and usage instructions.

Insert the battery observing the proper polarity(+/ polarity(+/–) as indicated inside the Battery Compartment.

CAUTION : Failure to properly align the battery polarity can cause personal injury and/or property damage.

• Remove the spent or discharged battery from the product.
• Remove the battery when not using the product for an extended period.
• Never throw batteries into a fire.Do not expose batteries to fire or other heat sources.
• Dispose of or recycle spent/discharged battery es in compliance with all applicable laws.

NOTE : For detailed information contact your local solid waste authority.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful int erference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the r receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>