PROGRESS LIGHTING P710120-31M Four Light Matte Black Luxe Wall Bracket Instruction Manual

PROGRESS LIGHTING P710120-31M Four Light Matte Black Luxe Wall Bracket

PACKAGE CONTENTS

OVERVIEW

HARDWARE CONTENTS (not actual size)

Safety Information

Please read and understand this entire manual before attempting to assemble, operate or install the product.

• CAUTION: Read instructions carefully and turn electricity off at main circuit breaker panel before beginning installation.
• CAUTION: Risk of fire. Min. 90äC supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
• WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.E.C. requlrements. If there are any questions, contact a qualifled electrical contractor.
• CAUTION : All glass is fragile. Use care when handling glass shades and bulbs.

Preparation

1. Before begInning Installatlon, make sure all parts are Included using the contents dlagrams from page 1. If any part Is missIng or damaged, do not attempt to assemble, install or operate the product.
2. Estimated assembly time: 30 minutes.
3. Tools required for assembly (not included: Phillips screwdriver, pliers, wire stripper, safety glasses, electrical tape, ladder.

Care and Maintenance

Shut off main power supply before cleaning product or changing light bulbs. To clean, wipe with damp cloth. Do not use abrasive
cleaners or cleaners that contain alcohol.

Assembly Instructions

1. Attach the back plate (CC) to the outlet box using the mounting screws supplied with the outlet box (not provided). Tighten securely.
2. Strip 3/8″ of insulation from the electrical wire ends.
   • Using wire nuts (BB), connect the WHITE fixture wire to the
   • WHITE supply wire from the outlet box; connect the BLACK fixture wire to the BLACK supply wire from the outlet box.
   • Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the round mounting plate. Push all of the wire connections carefully into the outlet box.
3. Attach the canopy of fixture (A) onto the back plate (CC) use the screw (AA) tighten the fixture against the mounting surface.
4. Thread the lamp (not included) into the fixture socket. Use 40-watt MAX incandescent candelabra base lamp, SBCFL or SBLED.

WARRANTY AND EXCLUSIVE REMEDY

Progress products, when properly installed and under normal conditions of use, are warranted to our customers only to be free from defects in material and workmanship at time of shipment. All warranty claims must be asserted within one year from date of purchase of the subject items; thereafter, warranty claims will not be honored. Customers’ sole remedy for a warranty claim or otherwise shall be limited to repair or replacement of the subject product if it is shown to have been defective in material or workmanship at time of shipment. Progress’s sole and maximum liability for a defective product shall never exceed the cost of the subject product.

EXCEPT FOR SUCH A WARRANTY AND EXCLUSIVE REMEDY AS STATED (AND THE EXPRESS WARRANTY OF TITLE), WE DISCLAIM ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL WE BE LIABLE TO CUSTOMER IN WARRANTY, CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, FOR ANY DAMAGES, WHETHER INCIDENTAL OR CONSEQUENTIAL, WHICH ARE ALLEGED TO BE CAUSED BY ONE OR MORE OF OUR PRODUCTS, BEYOND THE COST TO THE CUSTOMER OF THE SUBJECT PRODUCT OR PRODUCTS.

Therefore, the customer’s sole and exclusive remedy against us for breach of the warranty, breach of contract or negligence or strict liability or otherwise shall be limited to repair or replacement of the subject product at our option (excluding installation and removal charges which shall not be our liability) or, if we choose, refund of the purchase price. In no case does our warranty and exclusive remedy extend to anybody other than our customers. Our customers are not authorized to extend warranties or remedies on our behalf to anyone. Such unauthorized extensions of warranties or remedies by the customer shall remain customer’s responsibility. Customer is responsible for determining the suitability of our products for customer’s use or resale, or for incorporating them into objects or for applications which customer designs, assembles, constructs or manufactures.

Instructions d’Assemblage et Installation
Warning: Read the instructions carefully and turn off the power at the central switch before starting the installation.

• CAUTION: Read the instructions carefully and turn off the power at the central circuit breaker before beginning the installation.
• CAUTION: Risk of fire. Min 90°C supply conductors. Consult a qualified electrician to ensure the good branch circuit conductor.
• WARNING – If there are other regulating mechanisms used with this device, carefully follow instructions for meeting NEC requirements. If you have any questions, consult a qualified electrician.
• CAUTION – Glass is always fragile; handle component(s) and/or bulb(s) with care.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>