better bathrooms ARIMB018 Black Click Clack Slotted Basin Waste User Manual

June 12, 2024
Better Bathrooms

better bathrooms ARIMB018 Black Click Clack Slotted Basin Waste

Product Information

  • Product: ARIMB018 – Matt Black Slotted Sprung Basin Waste
  • Product: ARIBB020 – Brushed Brass Slotted Basin Waste
  • Product: CHSBW001 – Chrome Slotted Basin Waste
  • Product: ARIMW005 – Matt White Slotted Basin Waste
  • Product: ARIVRG005 – Vapour Rose Gold Slotted Basin Waste
  • Product: ARIMB019 – Matt Black Unslotted Sprung Basin Waste
  • Product: ARIBB021 – Brushed Brass Unslotted Basin Waste
  • Product: CHUBW001 – Chrome Unslotted Basin Waste
  • Product: ARIMW006 – Matt White Unslotted Basin Waste
  • Product: ARIVRG006 – Vapour Rose Gold Unslotted Basin Waste

Product Usage Instructions

Single-person assembly: We always recommend using professional tradespeople to install your product.
Congratulations on your purchase! And welcome to our growing gang of savvy shoppers. We’re on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings, and furniture to match. So, you can fall in love with your space every single day. As one of the UK’s largest independent bathroom stores, we’ve received countless awards; including the National Business Awards UK, the Digital Entrepreneur Awards, and being placed on The Sunday Times Fast Track 100.
We hope your new product goes above and beyond your expectations. However, should any problems occur, please contact us via betterbathrooms.com/content /contact-us.

Important Information
Please read these instructions thoroughly and retain for future reference. Installation must be carried out in compliance with The Water Fittings Regulations and Scottish Water Byelaws. The system must be flushed prior to installation, else it might clog the filter and the parts.

Parts / Diagrams Dimensions

No Part Description
1 Clicker dome
2 O-ring
3 Piston kit
4 Drain body
5 Rubber Washer
6 Rubber Washer
7 Plastic gasket
8 Locknut

Tools required

  • Seal tape
  • Spanner

Installation – Slotted/Unslotted Basin Waste
Note : Silicone sealant can be used.

  1. Unscrew the locknut(4) and remove the plastic gasket(3) and rubber washer(2).
  2. Insert the drain body(1) from above the basin.
  3. For the slotted basin waste, make sure the slot lines up with the overflow on the basin.
  4. Install the rubber washer(2), plastic gasket(3), and tighten with locknut(4).
  5. To fill the basin, the Clicker mechanism requires pressing down the clicker dome(1) and pressing it again to release the water.
  6. Check all the joints for leaks.

Troubleshooting

Issues Check
Loose of drain body Is locknut(8) fully tightened?
Water leak Is the clicker dome(1) fully tightened? Is there damage or dirt

with the o-ring(2)? Is there damage or dirt with the rubber
washers(5 or 6)?

Maintenance and Cleaning
To maintain the surface of your product, wipe with a clean damp cloth and wipe dry. Do not use any abrasive cleaning agents or  materials. If any harsh chemicals come into contact with the surface of the product, rinse and wipe clean immediately.

Product

  • ARIMB018 – Matt Black Slotted Sprung Basin Waste

  • ARIBB020 – Brushed Brass Slotted Basin Waste

  • CHSBW001 – Chrome Slotted Basin Waste

  • ARIMW005 – Matt White Slotted Basin Waste

  • ARIVRG005 – Vapour Rose Gold Slotted Basin Waste

  • ARIMB019 – Matt Black Unslotted Sprung Basin Waste

  • ARIBB021 – Brushed Brass Unslotted Basin Waste

  • CHUBW001 – Chrome Unslotted Basin Waste

  • ARIMW006 – Matt White Unslotted Basin Waste

  • ARIVRG006 – Vapour Rose Gold Unslotted Basin Waste

  • Single-person assembly

  • We always recommend using professional tradespeople to install your product

Congratulations on your purchase

And welcome to our growing gang of savvy shoppers We’re on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So, you can fall in love with your space every single day. As one of the UK’s largest independent bathroom stores, we’ve received countless awards; including the National Business Awards UK, the Digital Entrepreneur Awards and being placed on The Sunday Times Fast Track 100. We hope your new product goes above and beyond your expectations. However, should any problems occur, please:

Important information

  • Please read these instructions thoroughly and retain for future reference

  • Installation must be carried out in compliance with The Water Fittings Regulations and Scottish Water Byelaws.

  • The system must be flushed prior to installation, else it might clog the filter and the following phenomenon occurs: discharged water volume is small, or temperture cannot be controlled well.

  • Pressures must be equal for optimum performance

  • Please do not connect hot and cold water supply lines in reverse. This could result in hot water flowing from cold line and cause scalding.

  • The feed-water temperature of water shall not exceed 85°C.
    Exceeding 85°may cause scalding, the service life of faucets might be shortened, or the faucet might be damaged.

  • After installation, please make sure the faucet is securely mounted and checked for leaks.

Parts / Diagrams

better-bathrooms-ARIMB018-Black-Click-Clack-Slotted-Basin-Waste-
fig-2

Dimensions

better-bathrooms-ARIMB018-Black-Click-Clack-Slotted-Basin-Waste-
fig-3 Tools required

  • Seal tape
  • Spanner

Installation

Slotted/Unslotted Basin Waste
Note : Silicone sealant can be used.

  • Unscrew the locknut(4) , and remove the plastic gasketr(3) and rubber washer(2).
  • Insert the drain body(1) from above the basin. For the slotted basin waste, make sure the slot lines up with the overlfow on the basin.
  • Install the rubber washer(2), plastic gasket(3) and tighten with locknut(4)).
  • To fill the basin, the Clicker mechanisam requires pressing down the clicker dome, and pressing it again to release the water.
  • Check all the joints for leaks.

Troubleshooting

Issues Check
Loose of drain body •       Is locknut(8) fully tighten

•       Is the clicker dome(1) fully tighten

Water leak| •       Is there damage or dirt with the o-ring(2)

•       Is there damage or dirt with the rubber washers(5 or 6)

Maintenance and Cleaning

  • To maintain the surface of your product, wipe with a clean damp cloth and wipe dry, do not use any abrasive cleaning agents or materials.
  • If any harsh chemicals come into contact with the surface of the product, rinse and wipe clean immediately.

For more information
visit betterbathrooms.com
email customerservices@buyitdirect.co.uk
call 03303903062
write to Trident Business Park, Neptune Way, Huddersfield, HD2 IUA

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Better Bathrooms User Manuals

Related Manuals