X9 Performance X9RACDOCKCB 2.4GHz Wireless Keyboard User Manual

2.4GHZ (USB-A /USB-C) WIRELESS KEYBOARD
tor Windows / Chrome OS / Andraid
User Manual

X9RACDOCKCB 2.4GHz Wireless Keyboard

Welcome to the X9 Performance family and thank you for purchasing the X9RACDOCKCB.
Our mission is to deliver aesthetically pleasing, high-quality and affordable peripherals and accessories to satisfy our customers. We do that by creat-ing products that are both innovative and practical but most importantly easy-to- use.
If you have any questions, feedback, or just want to say hi, please reach out to us at techsupport@X9Performance.com.
With Love From Southern California, X9 Performance

PACKAGE CONTENTS

• Keyboard
• USB RF Receiver Dongle (located under the keyboard)
• Alkaline batteries (preinstalled)
• User’s Manual

SYSTEM REQUIREMENTS

• Any desktop, notebook computer or mobile devices with available USB-A or USB-C port
• Windows 7/8/10/11 or later; Chrome OS; Android

HARDWARE BASICS

Keyboard

INSTALLATION INSTRUCTIONS

Upon plugging in the USB RF receiver dongle, the keyboard will be recognized by your computer or mobile device without requiring any drivers as both keyboard are pre-synced to the dongle. Follow the steps below to set up and start using them effortlessly.

1. Remove the USB RF dongle from the back of the keyboard and insert it into any available USB-A or USB-C port on your computer, laptop, tablet or smartphone.
2. If you haven’t done so already, please remove the battery PULL tab film on the back of both the keyboard to connect the battery power, then switch them on. They will connect to the USB RF dongle automatically.
3. You are now ready to use the keyboard

RESYNCING USB RF DONGLE

NOTE: If you have received a replacement USB RF dongle, or if the keyboard were not synchronized prior to being received or are not function-ing correctly with the dongle, you can follow the steps below to resync them.
Keyboard

1. Unplug the USB RF dongle from your computer or mobile device, and turn the keyboard off by moving the ON/OFF switch to the OFF position.
2. Insert the USB RF dongle back into your computer or mobile devices.
3. Bring your keyboard close to the USB RF dongle and turn it on. Then immediately press and hold down the Esc key with your left hand and repeatedly tap the “K” key (kkkkkkkkkk) swiftly for a duration of 3 to 5 seconds. (If resync is done successfully, Fn lock LED will blink briefly).
4. Test the keyboard to verify if it works or not, if not working, please repeat steps 1-3. If needed, please contact our tech support, we will be glad to assist you.

TOP F-ROW SHORTCUTS

The keyboards top F-row (Fl-F12) is defaulted to boot up under Function key mode (white text/icons) as indicated by the FN lock LED.
To utilize the shortcuts “blue printed icons” on the F-row, simply press and hold the fn key followed by the shortcut you want to perform.
NOTE
You can switch the F-row from Function key mode to Shortcut mode at any time by pressing fn+Esc which will then turn off the FN lock LED indi-cator. When switched, you can still utilize the Function keys F1-F12 by holding down the fn key followed by the Function key you would like to perform, vice versa. You can always switch the keyboard back and forth between 2 modes by pressing Mac.
Below is a table of shortcut keys printed in blue color on top row.
Shortcut description

| Open default web browser
---|---
| Open email program
| Open Windows Folder Explorer
| Search
| File save
| Print
| Open Windows Settings
| Select all
| Copy
| Paste
| Cut
| Previous track
| Next track
| Open default music player (white color printed icon, and belongs to Function key mode)

MEDIA KEYS AND EXTRA SHORTCUT KEYS

In addition to the shortcut keys printed in blue color, the keyboard has 4 media keys and 4 extra shortcut keys which always work whether the key-board is in shortcut mode or Function key mode.
Below is a table of these 8 keys highlighted in gray blow.

| Mule
---|---
| Volume down
| Volume up
| Play/Pause
| Open Calculator
| Dim built-in display
| Brighten built-in display
| Lock Windows PC

SAFETY INSTRUCTIONS

Please read the following carefully. Incorrect use of this product may result in reduced performance, permanent damage and void your warranty.

• Keep this device away from liquid, humidity and moisture.
• Operate this device only within the specific temperature range of 0°C (32° F) to 40°C (104° F)
• Please refrain from *king the device apart. Doing so will void your warranty.
• Do not dispose this product in the garbage. Take it to your local recycling center.

SPECIFICATIONS

Keyboard

Tech support
Tech support hours are from 9:00 AM to 5:00 PM Monday through Friday (Pacific Standard Time).
Phone: 909-230-6788
E-mail: techsupport@X9Performance.com
Warranty
X9 Performance warrants that this product will be free from defects in title, materials and manufacturing workmanship for one year in North America from the date of the purchase. If the product is found to be defective then, as your sole remedy and as the manufacturer’s only obligation, X9 Performance will repair or replace the product. This warranty is exclu-sive and is limited to the product that this user’s guide ca-me with. This warranty shall not apply to products that have been subjected to abuse, misuse, abnormal electrical or environmental conditions, or any condition other than what can be considered normal use. The liability of X9 Performance arising from this warranty and sale shall be limited to a refund of the purchase price. In no event shall X9 Performance be liable for costs of procurement of substitute products or services, or for any lost profits, or for any conse-quential, incidental, direct or indirect damages, however caused and on any theory of liability, arising from this warranty and sale. These limitations shall apply notwithstanding any failure of essential purpose of any limited remedy.
Fcc warning
This device complies with Part 15 of the Fcc Rules. operation is subject to the Milo wing two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the Fcc Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, it not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oft and on, the user is encouraged to try to correct the interference by one or more of the following measures :
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– consult the dealer or an experienced radio/TV technician for help.
NOTE 2 : Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>