X9 Performance X9RF2ACMOUSE 2.4G Wireless Mouse for Laptop User Guide
- June 5, 2024
- X9 Performance
Table of Contents
X9 Performance X9RF2ACMOUSE 2.4G Wireless Mouse for Laptop
The X9 Performance X9RF2ACMOUSE is a 2.4GHz wireless USB-A and Type-C dual- mode mouse with a 800/1200/1600 dpi optical sensor, three soft-click buttons and Scroll wheel tor a precise and smooth control, Plus a dpi switch button. The ergonomic and ambidextrous design offers maximum comfort to both left- handed and right-handed users and helps to increase your productivity. The X9RF2ACMOUSE comes with both USB-A and Type-C RF donates eh allow you to connect the mouse up to 2 systems simultaneously and SWitch Derween 2 devices witn the cuck ora button. Compatible with Mac, PL, IPad Pro, Android and Chromebook devices without the need of any driver,
About this guide
Before you start using the X9RF2ACMOUSE, be sure to read this guide in its entirety.
Safety intructions
Please read the following carefully before using this X9 Performance product. Incorrect use of this product may result in reduced performance, pemanent damage and OId warranity:
- Do not place this product near a heat source
- Operating temperature of -5°C to 40°C. Storage temperature of -b°C to 4UG
- Do not place this product near moisture nor bquids.
- Operate and store at humidity of 20% to 90% Inon-condensing
- Do not place heavy objects on this product,
- Do not drop this product,
- Do not dispose this product in the garbage. lake t to your local recycungcentre
Hardware basics
Installation instructions
The X9RF2ACMOUSE does not require special drivers and will automatically be recognized by the computer as soon as the dongle is inserted into a USB port Simply follow the steps below and you are ready to go!
- Push to slide the compartment cover open.
- From the dongle storage slot, remove the USB RF dongle for the system type you have, either USB-A or Type-C, or both dongles if you have 2 systems to connect.
- Install the battery, close the compartment cover and switch to turn on the power.
- Make sure your computer or device with USB RF dongle plugged in are powered on and running, then press the system/mode button in the X9RF2ACMOUSE to connect it to the USB-A system and Type-CUSB-C system, one at a time, test the mouse functionality in both systems. Once the mouse is set up to connect to both systems and working. you are ready to go. Just remember to use the system/mode button to switch the mouse between 2 systems. Please note, whichever the system/mode LED the mouse is in before the mouse is turned off, that is the system/mode you will get after turning the mouse back on.
Note: You can configure the mouse buttons, pointer, pointer options and scroll wheel in the Hardware/Control Panel section of your computer’s settings and preferences.
Sync USB RF dongle with the mouse
Note: only if you have followed the Installation
Instruction several times already but couldnt get the mouse to work, or if you
lost the original USB RF dongle and get a new dongle from u5, you can resync
the dongle and the moUse with procedures below:
- Prep have battery installed into the mouse battery compartment, swtch to turn arn the mouse, then press the system/mode button into the mode LED for the new RF dongle type you mill resync the mouse ith. For example, f new R dongle is USB-A type, press the system/mode button to select into USB-A system/LED, Then sitch to turn off the mouse.
- Plug the new RF dongle into a running computer
- USB port. Ihe dongle will start searching for a mouse, Inormally up to 15 seconds it will stop , Fromply bnng the mouse a tew inches neaby the new RF dongle. Stch to turm on the mouSe, immediately press and hold down both the scroll wheel and night button together for 3-5 seconds, the mouse should sync with the new RF dongle automatically. Test the mouse to see f it works or
- Fit does not work, repeat step 1 through 3.
Technical support
For tech support please call +1 909 230 6888 or e-mail us at techsupportioxýperformance.com Torah support hours are from 8:30 AM to 5:30 PM Onauy tnrougn Fhday lPachic Standard Timel 9 Performance warants that this product will be free from selects me, materials andmanruoxtung warknarshp roneyer hom Ure dote a the Arhose. The products found to be defedve then, cayour sole remedy s the manuatarerš ony origation,
FCC STATEMENT
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>