nVent HOFFMAN ProLine G2 Sequestr Barrier Panel Instruction Manual
- June 12, 2024
- nVent HOFFMAN
Table of Contents
nVent HOFFMAN ProLine G2 Sequestr Barrier Panel
Product Information
Product Name: ProLine G2 Sequestr
Part Number: P/N 89166734
Enclosure Height: 35.0$5
Product Usage Instructions
- Ensure that the product is properly assembled and all components are securely attached.
- Connect the necessary cables and power supply to the product.
- Place the product in a suitable location, ensuring proper ventilation and clearance.
- Power on the product using the designated power switch or button.
- Follow the on-screen instructions or refer to the user manual for initial setup and configuration.
- Once the product is set up, you can start using it for its intended purpose.
- Refer to the user manual for specific instructions on how to use different features and functionalities of the product.
- If you encounter any issues or have questions regarding the product usage, refer to the troubleshooting section of the user manual or contact customer support for assistance.
Please note that these instructions are a general guideline. For detailed and specific instructions, refer to the complete user manual provided with the product.
Warning
The functions, fits, and clearances of the installation described herein are
calculated from information supplied by the manufacturers of the equipment to
be installed. Be certain to check the function, fits, and clearances of all
equipment both before and after installation to assure that it operates
properly and safely and meets all applicable codes, standards, and
regulations.
In the event the completed installation does not function properly or fails to
meet any such codes, standards, or regulations, do not attempt to make
alterations or operate the equipment. Report such facts immediately to:
Vent HOFFMAN Customer Service
2100 Hoffman Way
Anoka, MN 55303
763 422 2211
http://hoffman.nvent.com/contact-us
Dimension
Parts
Overview
Installation
PROPER ADJUSTMENT WILL ALLOW THE OPERATING HANDLE TO BE PLACED IN THE “ON”
POSITION WHEN THE DOOR IS CLOSED AND WILL PREVENT THE PRIMARY DOOR FROM
OPENING WHEN THE OPERATING HANDLE IS IN THE “ON” POSITION.
IF THE DOOR CAN BE OPENED WITH THE OPERATING HANDLE IN THE “ON” POSITION, MOVE
THE DOOR CATCH UP.
IF THE OPERATING HANDLE CANNOT BE PUSHED UP INTO THE “ON” POSITION (WITH DOOR
CLOSED), MOVE PEG ‘A’ ON THE PIVOT BRACKET (ITEM 13) DOWN SLIGHTLY. SEE STEP
11 FOR REFERENCE.
© 2021 Hoffman Enclosures Inc.
- PH 763 422 2211
- nVent.com/HOFFMAN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>