PEREL E305DM Mini 24 Hour Timer Plug User Manual
- June 12, 2024
- PEREL
Table of Contents
PEREL E305DM Mini 24 Hour Timer Plug
Product Information
The E305DM – E305DM-G is a mini 24-hour timer that allows you to schedule the on and off times of your connected appliances. It is designed to be easy to use and has various safety features to ensure optimal performance. The timer has a power supply of 230V and a maximum power capacity of 3680W or 16A. Its compact dimensions of 54 x 103 x 70 mm make it suitable for use in various settings.
Product Usage Instructions
1.Introduction
Before using the E305DM – E305DM-G timer, please read the user manual thoroughly. If the device was damaged during transit, do not install or use it. Contact your dealer for assistance.
2.Safety Instructions
Ensure that you follow all safety instructions provided in the user manual. Failure to do so may result in damage or injury, and the dealer will not accept responsibility for any ensuing defects or problems.
3. Operation
Setting the Time
- Rotate the dial in a clockwise direction to set the corresponding time.
- For example, if it is 2 pm, set the dial at 14. Each dash between the numbers represents 30 minutes.
Setting the Timer
- The timer delay is determined by the black push segments around the dial. Each segment represents 30 minutes.
- Push down all the segments for the time you want the connected appliance to be switched on.
- For example, if you want the connected appliance to be switchedon at 9 am and switched off at 6 pm, push down all the segments between 9 and 18 in ascending order.
- Next, connect the timer to the mains and ensure that the timer is switched off.
- Connect the appliance to the timer and switch on the appliance. Finally, switch on the timer.
Manual On/Off
The pre-set On/Off commands can be interrupted by using the manual override switch located on the side of the unit. When switched to position I, the connected appliance is switched on permanently.
4. Cleaning and Maintenance
Refer to the user manual for instructions on cleaning and maintaining the E305DM – E305DM-G timer. Regular maintenance will help ensure its optimal performance and longevity.
5.Technical Specifications
The E305DM – E305DM-G timer has a power supply of 230V, a maximum power capacity of 3680W or 16A, and dimensions of 54 x 103 x 70 mm. Use this device with original accessories only to prevent any damage or injury.
For more information about this product and the latest version of the user manual, please visit our website www.perel.eu .
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device
after its lifecycle could harm the environment. Do not dispose of the unit (or
batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling. This device should be returned to your distributor or
to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Perel! Please read the manual thoroughly before
bringing this device into service. If the device was damaged in transit, don’t
install or use it and contact your dealer.
Safety Instructions
- Indoor use only.
- Keep the device away from children and unauthorised users.
- Do not connect to an appliance with a load exceeding the capacity of the timer (see Technical Specifications).
- Do not use a timer to control an appliance containing a heating element (cooking appliance, heater, iron…).
- Never leave the appliance unattended while in use.
- Always make sure the plug of the connected appliance is fully inserted into the timer.
- Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.
Operation
Note: use the timer only between 0 °C and 55°C
Setting the Time
- Rotate the dial in a clockwise direction and set the dial corresponding the time.
- Example: At 2 pm, set the dial at 14. Each dash between the numbers represents 30 minutes.
Setting the Timer
-
The timer delay is determined by the black push segments around the dial. Each segment represents 30 minutes. Push down all the segments for the time you want the connected appliance to be switched on.
Example: The connected appliance must be switched on at 9 am and switched off at 6 pm. Push down all the segments between 9 and 18 in ascending order. -
Next, connect the timer to the mains. Make sure the timer is switched off.
-
Connect the appliance to the timer and switch on the appliance. Finally, switch on the timer.
Manual On/Off
The pre-set On/Off commands can be interrupted by using the manual override
switch located on the side of the unit. When switched to the position “I”, the
connected appliance is switched on permanently.
Cleaning and Maintenance
- Remove the timer from the mains before cleaning.
- Wipe with a dry cloth. Do not immerse in water or any liquid.
Technical Specifications
| power supply | 230 V |
|---|---|
| max. power | 3680 W / 16 A |
| dimensions | 54 x 103 x 70 mm |
Use this device with original accessories only. Velleman nv cannot be held
responsible in the event of damage or injury resulting from (incorrect) use of
this device.
For more info concerning this product and the latest version of this manual,
please visit our website www.perel.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights
reserved. No part of this manual may be copied, reproduced, translated or
reduced to any electronic medium or otherwise without the prior written
consent of the copyright holder.
Warranty
Velleman® Service and Quality Warranty
Since its foundation in 1972, Velleman® acquired extensive experience in the
electronics world and currently distributes its products in over 85 countries.
All our products fulfil strict quality requirements and legal stipulations in
the EU. In order to ensure the quality, our products regularly go through an
extra quality check, both by an internal quality department and by specialized
external organisations. If, all precautionary measures notwithstanding,
problems should occur, please make appeal to our warranty (see guarantee
conditions).
General Warranty Conditions Concerning Consumer Products (for EU):
-
All consumer products are subject to a 24-month warranty on production flaws and defective material as from the original date of purchase.
-
Velleman® can decide to replace an article with an equivalent article, or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion. You will be delivered a replacing article or a refund at the value of 100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the
date of purchase and delivery. -
Not covered by warranty:
- all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity…), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits;
- consumable goods, parts or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, nonrechargeable, built-in or replaceable), lamps, rubber parts, drive belts… (unlimited list);
- flaws resulting from fire, water damage, lightning, accident, natural disaster, etc.…;
- flaws caused deliberately, negligently or resulting from improper handling, negligent maintenance, abusive use or use contrary to the manufacturer’s instructions;
- damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) monthswhen the article is used professionally);
- damage resulting from an inappropriate packing and shipping of the article;
- all damage caused by modification, repair or alteration performed by a third party without written permission by Velleman®.
-
Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.
-
Hint: In order to save on cost and time, please reread the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.
-
Repairs occurring after warranty expiration are subject to shipping costs.
-
The above conditions are without prejudice to all commercial warranties.
The above enumeration is subject to modification according to the article (see article’s manual).
Made in PRC
Imported for PEREL by Velleman nv
Legen Heirweg 33, 9890 Gavere, Belgium
www.perel.eu