nVent HOFFMAN PROLINE Plinth Base Stacking Kit Instruction Manual
- June 12, 2024
- nVent HOFFMAN
Table of Contents
nVent HOFFMAN PROLINE Plinth Base Stacking Kit
Product Information
The Plinth Base Stacking Kit is a set of components designed to stack plinth bases. It is available in two sizes: 100mm to 100mm and 200mm to 100mm. The kit includes the necessary hardware for installation.
Product Specifications:
- Model: Rev. B
- Part Numbers: 87550248, 87569436
- Stacking Sizes:
- 100mm to 100mm
- 200mm to 100mm
- 100mm to 200mm
- 200mm to 200mm
- Maximum Stacking Height: 400mm
Product Usage Instructions
- Start by arranging the plinth bases in the desired configuration. Both vented and solid bases can be used.
- Ensure that the stacking height does not exceed 400mm. It is important not to exceed this limit for stability and safety.
- Use the provided M12x35mm screws to secure the bases together. Use four screws for each base.
- Tighten the screws securely using an M12 wrench or tool.
Dimension
100mm to 100mm
100 MM Plinth Base
100 MM Plinth Unterseite
100 MM Base De Plinth
100 MM Base De Plinth
100 MM Plinth Base
100 MM Plinth Unterseite
100 MM Base De Plinth
100 MM Base De Plinth
200mm to 100mm
200 MM Plinth Base
200 MM Plinth Unterseite
200 MM Base De Plinth
200 MM Base De Plinth
100 MM Plinth Base
100 MM Plinth Unterseite
100 MM Base De Plinth
100 MM Base De Plinth
100mm to 200mm
100 MM Plinth Base
100 MM Plinth Unterseite
100 MM Base De Plinth
100 MM Base De Plinth
200 MM Plinth Base
200 MM Plinth Unterseite
200 MM Base De Plinth
200 MM Base De Plinth
200mm to 200mm
200 MM Plinth Base
200 MM Plinth Unterseite
200 MM Base De Plinth
200 MM Base De Plinth
200 MM Plinth Base
200 MM Plinth Unterseite
200 MM Base De Plinth
200 MM Base De Plinth
Double Bay Enclosures
If the bottom–front or the back cover has excess flex in and out, use
reference Detail A. Drill a .25 inch (6.5mm) diameter hole in flanges as shown
and install a 10–32x.5 (M5x.02) screw with nut (customer supplied).
NOTE: Bases may be stacked in any arrangement you so desire with vented
and/or solid bases.
DO NOT exceed 400mm total stacking height.
© 2018 Hoffman Enclosures Inc.
PH 763 422 2211
nVent.com/HOFFMAN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>