Shenzhenshi Maideshun Trsde A9 4-In-1 Multifunctional Wireless Charger User Manual
- June 5, 2024
- Shenzhenshi Maideshun Trsde
Table of Contents
Shenzhenshi Maideshun Trsde A9 4-In-1 Multifunctional Wireless Charger
INTRODUCTION
Thank you for choosing to buy our products, This product is a 4 in 1 multi- functional wireless charger. With Qi wireless charging technology, Support Qi standard mobile phone charging, It also supports wireless charging of Qi headset, The independent watch charging module charges the watch. Simple design, easy to use.
Description
Specifications
- Name 4 in 1 Multifunctional Wreless Charger
- Standards QI
- Input 9V/2-3A0r 5/3A
- Efficiency 75%
- Charging Power: 15W/10W/7.5W/5W (Smartphone); 5W( Headset ); 3W( Watch);
INSTALL AND USE
Installation
Connect the power adapter (QC2.0/ 3.0) to the wireless charger and power on.
Product USE
- Mobile Phone Wireless Charging -Qi mobile, Put it into the induction area of wireless charger for charging. Non Qi mobile, The corresponding wireless charging receiving coil shall be matched, Put it into the induction area of wireless charger for charging
- QI Headset Wireless Charging -Put the Qi headset box into the wireless charging sensing area of the headset to charge. (3), Watch Wireless Charging T -Put the watch on the watch charging module bracket to charge
- Watch Charging Module USE When using the charging module of the watch alone, pull out the charging module of the watch and plug it into the USB port (power adapter, laptop, mobile power and other USB output interfaces) with the output of 5V/ 1a, and then use it.
CAUTION
- Do not squeeze, colide or pull the power cord hard to avoid damage to electronic parts.
- Do not disassemble or throw into water or fire by yourself to avoid short-circuit leakage.
- Please use it in the temperature range of -10C+45C and store it in the temperature range of-40’C +70C to avoid equipment failure.
- Do not use in severe damp or corrosive environment to avoid circuit damage.
- Do not place magnetic or magnetic cards (ID card, bank card, etc.) too close to avoid magnetic card failure.
- Please contact implantable medical equipment (Pacemakers, cochlear implants, etc.) Keep at least 30cm away.
- Do not allow children or pets to play with equipment, in order to avoid injuries and unnecessary accidents.
- Do not place metal foreign bodies on the surface of wireless charger for a long time to avoid equipment failure or fever.
- Do not use unauthorized or incompatible power adapters to avoid damage to equipment or other hazards.
- Please treat the equipment according to the local regulations. The equipment should not be treated as domestic waste.
WARRANTY
In order to ensure that you get reliable after-sales service, please read the following warranty instructions carefully.
Warranty clause
Within seven days Substitution: Within seven days from the date of sale, if the product performance fails, and its packaging is in good condition, no scratches, enjoy the renewal service.
One-year warranty:
Within twelve months from the date of sale, in normal use, non-man-made damage to the performance of the failure, free maintenance services.
Warranty Scope
In normal use, it can’t work properly or break down. And after the
confirmation of our company, enjoy after-sales service commitment. The
following circumstances are not covered by the warranty:
- Parts are not guaranteed
- Faults caused by improper operation of users.
- Maintenance Center maintenance due to accidents, man-made damage, self-disassembly, labeling removal and non-authorized maintenance by our department Causes the breakdown..
- Note: Due to improper operation of users, mobile devices are damaged or even dangerous. The Division assumes no responsibility whatsoever.
Overdue Warranty
If the product exceeds the warranty period, the customer still enjoys the maintenance service and only needs to pay the cost of replacing parts and materials
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC’s RF exposure
To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>