BRIGGS and STRATTON 020685-00 3, 100 PSI Pressure Washer Instruction Manual
- June 12, 2024
- BRIGGS and STRATTON
Table of Contents
**BRIGGS and STRATTON 020685-00 3, 100 PSI Pressure Washer Instruction
Manual
**
Main Uni
Note: Unless noted otherwise, use the standard torque specifications
| REF NO | PART NO | QTY | DESCRIPTION |
|---|---|---|---|
| 1 | 707988 | BASE | |
| 2 | 707971 | HANDLE | |
| 3 | 706920 | BILLBOARD | |
| — | B1797GS | CLIP | |
| 4 | 707448 | HANDLE-LOWER | |
| 5 | 189332GS | PLUG, Hole | |
| 6 | 707446 | GROMMET | |
| 7 | 707208 | SHROUD | |
| 8 | 707443 | MOUNT-VIBRATION | |
| 9 | 707449 | GROMMET | |
| 10 | 704293 | E-RING | |
| 11 | 707230 | PUMP | |
| 12 | 700223 | KIT, Hardware, Pump Mounting | |
| 13 | 708963 | TANK-CHEMICAL | |
| — | 312369GS | CAP-CHEMICAL TANK | |
| — | 709975 | DECAL-WARNING | |
| 14 | 708807 | GUN, BIT | |
| 15 | 705001 | KIT-O-RING | |
| 16 | 771020 | HOSE | |
| 17 | 706595 | WAND-QC | |
| 18 | 707182 | Kit, Quick Connect Nozzles | |
| — | 709745 | NOZZLE-QC, RED | |
| — | 195983AKGS | NOZZLE, QC, Yellow | |
| — | 195983VGS | NOZZLE-QC WHITE | |
| — | 198841GS | NOZZLE, QC, Black | |
| 19 | 707991 | AXLE | |
| 20 | 707442 | KIT, Wheel | |
| 21 | 705848 | KIT, Hardware, Handle | |
| 900 | 121P02-0001-F1 | ENGINE | |
| — | 23139GS | KEY-(Not Illustrated) | |
| — | 100005 | OIL-4 CYCLE 30W 18OZ.-(Not Illustrated) | |
| — | 705851 | DECAL-Warning Spark-(Not Illustrated) | |
| — | 705076 | HOSE-CHEMICAL-(Not Illustrated) | |
| — | 705854 | TAG, Warning, English-(Not Illustrated) | |
| — | 6039 | PUMP Saver-(Optional Accessory – Not Illustrated) | |
| — | 6059 | PERFECT MIX MULTI-PURPOSE WASH-(Optional Accessory – Not |
Illustrated)
—| 6160| | Project Pro® PerfectMix Concrete, Brick, And Tile Cleaner-(Optional
Accessory – Not Illustrated)
Pump
Note: Unless noted otherwise, use the standard torque specifications
| REF NO | PART NO | QTY | DESCRIPTION |
|---|---|---|---|
| 33 | 204087GS | SCREW | |
| 36 | B2384GS | FILTER, Garden Hose | |
| 56 | 208673GS | VALVE, Thermal Relief | |
| 68 | 707377 | FITTING | |
| A | 317897GS | KIT, Check Valve-(Refer to Footnote ) | |
| B | 204084GS | KIT, Water Seals-(Refer to Footnote ) | |
| C | 707342 | KIT-O-RING-(Refer to Footnote ) | |
| D | 706610 | KIT, Unloader-(Refer to Footnote ) | |
| E | 317787GS | KIT, Chemical Injector-(Refer to Footnote ) | |
| F | 317788GS | KIT, Easy Start-(Refer to Footnote ) | |
| G | 200350GS | KIT, Grub Screw & Washer-(Refer to Footnote ) | |
| H | 201497GS | FITTING-(Refer to Footnote ) | |
| J | 201496GS | KIT, Water Inlet-(Refer to Footnote ) | |
| K | 706780 | KIT-PLUG-(Refer to Footnote ) | |
| — | 6039 | PUMP Saver-(Optional Accessory – Not Included) | |
| — | 6059 | PERFECT MIX MULTI-PURPOSE WASH | |
| — | 6160 | Project Pro® PerfectMix Concrete, Brick, And Tile Cleaner |
Hardware Identification & Torque Specifications
Property Class| | Class 5.6| | | Class8.8| | Class10.9| |
| | Class12.9|
---|---|---|---|---|---|---|---|---|---|---|---|---
Size Of| inrfibs| | infibs| | infibs| | in/lbs|
Hardware| ft/lbs| Nm.| ft/lbs| Nm.| ft/lbs| Nm.| ft/lbs| Nm.
M3| 5.88| .56| 13.44| 1.28| 19.2| 1.80| 22.92| 2.15
M4| 13.44| 1.28| 30.72| 290| 43.44| 4.10| 52.56| 4.95
M5| 26.4| 250| 60.96| 5.75| 5.97| 8.10| 7.15| 9.7
M6| 4464| 43| 7.3| 9.9| 10.3| 14| 12.1| 16.5
M7| 5.2| 71| 12.1| 16.5| 16.9| 23| 19.9| 27
M8| 7.7| 10.5| 17.7| 24| 25| 34| 29| 40
M10| 15| 21| 35| 48| 50| 67| 59| 81
M12| 26| 36| 61| 83| 86.2| 117| 103| 140
M14| 42| 58| 101| 132| 136| 185| 162| 220
M16| 64| 88| 147| 200| 210| 285| 250| 340
M18| 89| 121| 202| 275| 287| 390| 346| 470
M20| 126| 171| 290| 390| 405| 550| 486| 660
M22| 169| 230| 390| 530| 559| 745| 656| 890
M24| 217| 295| 497| 375| 708| 960| 840| 1140
M27| 320| 435| 733| 995| 1032| 1400| 1239| 1680
M30| 435| 590| 995| 1350| 1401| 1900| 1681| 2280
M33| 590| 800| 1349| 1830| 1902| 2580| 2278| 3090
M36| 759| 1030| 1740| 2360| 2441| 3310| 2935| 3980
M39| 988| 1340| 2249| 3050| 3163| 4290| 3798| 5150
he guides and ruler furnished below are designed to help you select the appropriate hardware.
Standard Hardware Sizing
When a washer or nut is identified as 1/2” (M8), this is the Nominal size, meaning the inside diameter is 1/2 inch (8mm metric thread diameter); if a second number is present it represents the threads per inch (distance between threads).
When bolt or capscrew is identified as 1/2 – 16 x 2” (M8 – 1.25 x 50), this means the Nominal size, or body diameter is 1/2 inch (8mm metric thread diameter), the second number,16, represents the threads per inch, (distance between threads). The final number is the body length of the bolt or screw, 2 inches (50mm)
| Hardware Grade | SAE Grade 2 | SAE Grade 5C ) | SAE Grade 4 |
|---|---|---|---|
| Size 01 Hardware | _infibs | ||
| _ MOs | Nm. | _iMbs | |
| _ Nibs | Nm. | _infibs | |
| _ ft/lbs | Nm. | ||
| 8-32 | 19 | 2.1 | 30 |
| 8-36 | 20 | 2.3 | 31 |
| 10-24 | 27 | 3.1 | 43 |
| 10-32 | 31 | 3.5 | 49 |
| 1/4-20 | 66 | 7.6 | 8 |
| 1/4-28 | 76 | 8.6 | 10 |
| 5/16-18 | 11 | 15.0 | 17 |
| 5/16-24 | 12 | 16.3 | 19 |
| 3/8-16 | 20 | 27.2 | 30 |
| 3/8-24 | 23 | 31.3 | 35 |
| 7/16-14 | 30 | 40.8 | 50 |
| 7/16-20 | 35 | 47.6 | 55 |
| 1/2-13 | 50 | 68.0 | 75 |
| 1/2-20 | 55 | 74.8 | 90 |
| 9/16-12 | 65 | 88.4 | 110 |
| 9/16-18 | 75 | 102.0 | 120 |
| 5/8-11 | 90 | 122.4 | 150 |
| 5/8-18 | 100 | 136 | 180 |
| 314-10 | 160 | 217.6 | 260 |
| 3/4-16 | 180 | 244.8 | 300 |
| 7/8-9 | 140 | 190.4 | 400 |
| 7/8-14 | 155 | 210.8 | 440 |
| 1-8 | 220 | 299.2 | 580 |
| 1-12 | 240 | 326.4 | 640 |
NOTES
-
These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews.
-
Recommended seating torque values for locknuts:
a. for prevailing torque locknuts – use 65% of grade 5 torques.
b. for flange whizlock nuts and screws – use 135% of grade 5 torques. -
Unless otherwise noted on assembly drawings, all torque values must meet this specification.
Common Hardware Types
Hex Head Capscrew
Carriage Bolt
Washer
Lockwashe
Hex Nut
Wrench & Fastener Size Guide
1/4” Bolt or Nut Wrench—7/16”
M6 Bolt or Nut Wrench—10mm
5/16” Bolt or Nut Wrench—1/2”
M8 Bolt or Nut Wrench—13mm
3/8” Bolt or Nut Wrench—9/16”
M10 Bolt or Nut Wrench—17mm
7/16” Bolt or Nut Wrench (Bolt)—5/8” Wrench (Nut)—11/16”
M12 Bolt or Nut Wrench—19mm
1/2” Bolt or Nut Wrench—3/4”
M14 Bolt or Nut Wrench—22 mm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>