AiKUN BT830 Wireless Mouse User Manual
- June 4, 2024
- AiKUN
Table of Contents
BT830 Wireless Mouse
User Manual
BT830 Wireless Mouse
MODEL NO. | BT830 | TYPE | BT5.1+2.4G |
---|---|---|---|
MP DATE | 2021-03-25 | REVISION DATE | 2021-11-22 |
Products Photo | ![AiKUN BT830 Wireless Mouse](https://manuals.plus/wp- |
content/uploads/2022/09/AiKUN-BT830-Wireless-Mouse.jpg)
Classify| Item| Specification/Parameter| Item|
Specification/Parameter
specifi
cation| Mouse Type| BT5.1+2AG| Number Of Keys| 3D 4Keys
Battery Type| Li-ion 800mAh| Mouse Size(LIAPH)| 110’63’29mm
Operate Mode| Optical I Red ,| Mouse MW| 55±10g
DPI Button| Yes| USB Receiver NW| 2±0.5g
Default DPI| 1200| USB Receiver IC| SE8RS02
DPI Switch| 1000-1200-1600| Sensor Max Acceleration| 10G
Data rate of return| 125HZ| Sensor Movement Speed| 30 Inches Per Second
Key life| 3 million| Working Distance| 8-10M
Master IC Mode| HS6620B•3205| System Compatibility| 2AG:WinXPANin7ANin8/W10/w
11. Android 4.4 or above.10S 13 or above.Mac OS X 10.5 or above.LINUX.Chrome
OS BT: Win8/W10.Android 5.0 or above 13 or above.Mac OS X 10.1 or above
Mouse Operating
Voltage| DC3.0-4.2V| USB Receiver Operating
Voltage| USB 4.5V to 5.25VDC
Operating Current| t.=-, 20mA| USB Receiver Operating
Current| C50mA
Operating
temperature| 0~45℃| Storage temperature| -20~+60℃
Operating humidity| 20~90%| Storage humidity| ≤93% (40℃)
Operating
temperature| 0~45℃| Storage temperature| -20~+60℃
Operating humidity| 20~90%| Storage humidity| ≤93% (40℃)
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.