Paulmann 942.68 Plug and Shine LED Light object Smart Home Zigbee Cube Instructions
- June 12, 2024
- Paulmann
Table of Contents
Paulmann 942.68 Plug and Shine LED Light object Smart Home Zigbee Cube
Product Information
- Model: IP65
- Product Numbers: 942.68, 942.69
- Manufacturing Date: 31.08.2021
- Energy Efficiency Rating: A++
- Compliance with Regulations: 874/2012
- Last Updated: 01.09.2021
- Website: www.paulmann.com/symbols
- Included Components: 1x A, 1x B, 1x C, 1x D, 1x E
- Maximum Length: 50m
- Maximum Wattage: 150W
- Communication Protocol: ZigBee
- Driver Model: Paulmann Art.-Nr. 988.48 (not included)
- Ingress Protection Rating: IP44, IP65
Product Usage Instructions
- Before starting, ensure the product is installed in a suitable location and connected to a compatible power supply.
- If a factory reset is required, perform the following steps:
- Turn the product off and wait for at least 5 seconds.
- Turn the product on and off consecutively for more than 3 seconds, repeating this process for a total of 5 times.
- The factory reset procedure is now complete.
- To turn the product on, simply press the power button.
- For additional information on product symbols and their meanings, refer to the provided website www.paulmann.com/symbols.
This product contains a light source with energy efficiency class
Pacakge Content
Connections
Replaceability
- Light source or (4) operating device can be replaced by end users without permanent damage to the luminaire.
- Light source or (5) operating device can be replaced by a qualified electrician without permanently damaging the luminaire.
- Light source or (6) operating device is not replaceable, the luminaire must be replaced.
References
- Paulmann – Lamps & Luminaires from the Manufacturer
- Q & A: Icons on Paulmann Products
- Zigbee lighting control: What is it?
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>