BebeStars 436-02 Moonlight Montessori User Manual

June 12, 2024
BebeStars

**BebeStars 436-02 Moonlight Montessori User Manual

**

Parts List

6″70screw28
Screw
6
90screw*4

6″50screw*21

Nut*50

Plastic tape*2

840Wooden pin12

3*30Self tapping screw’32

Directional  flat wheel’*6

3’165elf screw’12 tapping

Screwdriver*1

Wrench’1

Drawer Screw Hole Sticker*9

PARTS LIST

Product Parts Installation
Product Parts Installation

ASSEMBLY INSTRUCTIONS

**

Product Parts Installation
Product Parts Installation
Product Parts Installation
Product Parts Installation
Product Parts Installation**
Product Parts Installation

Completed Bed

Product Overview

IMPORTANT, KEEP FOR FUTURE REFERENCE-READ CAREFULLY

The instructions for use should be followed to the letter, so as not to reduce the level of safety of the product.

WARNING! Do not forget about the risk of fire when the bed is near the fireplace or other sources of fire, such as electric hobs and gas stoves.

WARNING! It should not be placed too close to other furniture or windows, but almost glued to a wall or at a distance of 30cm. between the wall and one side of the bed.

WARNING! Do not leave anything in the bed, or place it near another object that could act as a footrest or cause strangulation or suffocation. For example ropes, blinds or curtains, etc.

WARNING! Do not use the bed if parts are missing or damaged, and use only spare parts approved by the manufacturer. The width and length are predetermined, as it is important that the gaps between the mattress and the sides do not exceed 3cm. This is to minimize the risk of the child being trapped in a vacuum.

WARNING! Do not use more than one mattress on the cot. Use only amanufacturerapproved bed mattress and make sure that the gap on the sides does not exceed 3cm.

he mattress to be used must have dimensions proportional to the technical specifications of the manufacturer. The minimum size of the mattress must be 200x90cm. Be aware that there shall be no gap more than 30mm between the mattress and the sides end ends in any position of the mattress.

All connections must be tightened properly, checked regularly and tightened again when needed. Screws and bolts should not be loose as a child may squeeze parts of the body or climb on their clothes (eg laces, necklaces, baby doll ribbons, etc.). Thereisarisk of strangulation.

CARE & CLEANING

Your furniture can be cleaned by wiping with a damp cloth and drying with a soft cleancloth.

Do not use abrasives, bleach, alchohol orammonia based household polishes. Take care when handling or moving. Careless handling can damage wooden furniture.

ASSEMBLY INSTRUCTIONS

  1. InsertFinto3and4andthen connectitwith 1and 2 with Aand D. Repeat on bothends.

  2. Connect5and 6to the bed head with Aand D.

  3. Connect 7 and 8 to the bed head with A and D, then connect them to the bedside(5and 6) with C.

  4. .
    A.Connect 12 with9and 10 with Aand D.
    B.Connectand fix9, 10and 11 to the bed legs with Band D.
    C.Fix14to9withtwoG.
    D. Lay 13 onthe edge of the bed and fix it with G.

  5. Connect15,16 and 18 with Cand D

    1. Insert 19into the chuteand insert Fin the middle to connect.
  6. Connect 15,16 and 17 with Cand D.

  7. Use Cand D to fix 20 on the corresponding positions of 17 and 18.

  8. UseJ to fix wheel H at the position shown in the figure.

  9. Paste the drawer screw hole stickers N.

Thank you for choosing Bebe Stars products

FOLLOW US
www.bebestars.gr

Qr Cod

bebestarsbygilis

@bebe.stars

bebestarsbygilis

63200 | Nea Moudania | Greece

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals