DAXYS HT-196 Portable Electric Air Pump User Manual
- June 4, 2024
- DAXYS
Table of Contents
DAXYS HT-196 Portable Electric Air Pump
Thank you for purchasing the Smart Bike Pump. Please read this user manual carefully before using this product , and keep it for future reference.
Packing list
- 1 x Portable electric air pump
- 1 x Flexible hose with schrader valve
- 1 x Presta valve
- 1 x Inflating needle
- 1 x Nozzle for swimming ring
- 1 x Type-C cable
- 1 x Waterproof storage bag
Specification
- Portable Electric Air Pump
- Product model: DXYP04
- Product size: 40x40x191mm
- Weight: 380g
- Inflation pressure: 120PSI (max)
- Working temperature: -10-45° C
- Battery capacity: 8.88Wh
- Charging input: 5V/2A
Illustration
ATTENTION
- Do not leave during inflation
- Keep away from combustible and explosives.
- Avoid moisture, sand and prevent from falling
- Do not store the product in a place that is too cold or hot.
- It is forbidden to throw the product into fire or discard it at random due to the built-in lithium battery.
- Not for children
How to use
Charging method
The USB charger is recommended to use 5V/ 2A. Use the Type-C charging cable to connect the air pump and power adapter (not included) for charging Charging status: battery indicator flashes Full state: the battery indicator is green and does not flash The product cannot be used during charging.
Startup and shutdown
- Long press the power button for 3 seconds, as shown in the figure Shut down successfully
- Automatic shutdown in 3 minutes without operation
- Automatically shut down when battery is low
- Long press the power button for 3 seconds, as shown in the figure. Switch on successfully
Mode switching
Short press mode selection key [K] .you can choose 5 inflatable scene modes.
They are:
Unit switching
Short press the unit switch key [i], and you can switch the air pressure
display unit. The unit conversion formula is shown below
1PSI 6.89KPA 1BAR = 100KPA 1Kg/cm2 = 98KPA
Preset pressure value
- Short press +/- button []: adjust the preset pressure value +/- 0.5PSI
- Long press +/- buttorn []: can quickly adjust the preset pressure value
- Note: The scene switch and preset pressure value are automatically saved by the pump. You only need to switch the mode for the next use, and the preset pressure will be automatically set.
Hose connection
The connection of the hose is shown in the following figure:
Start inflation
Short press the inflation switch j] to start inflation. The digital display of
the real-time air pressure value [e] changes during inflation. Noise cannot be
avoided during inflation, and the hose will be heated after long-term work.
Avoid touching the hose and joints [a] by your hands after long-term use.
Stop Inflation
- Short press the inflation switch [] to stop inflation manually.
- When the measured pressure [e] reaches the preset pressure [g], stop inflation automatically.
LED Lighting
- Long press LED [] to turn on LED lighting.
- Press and hold the LED light button [i] to turn off the LED light.
Measuring pressure
After switching on, connect the hose to the measured object, and the measured
pressure value [e] shows the current pressure value.
Reset the pressure
After switching on, when the measured pressure value is not zero, press the
preset +/- key [] for 3 seconds to enter auto reset.
Note: The product has been calibrated the factory. Due to the difference in altitude or the sensor tolerance, the measured pressure may not be zero, manual clearing can improve the accuracy of pressure detection. Do not connect inflatable objects when resetting.
High-temperature safety precautions
When the hose is unscrewed, the air pipe and the joint will be heated due to
long-term work. Do not touch it with your hands for a long time.
Common product pressure values
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>