niceboy raze SUPERSONIC XL Wireless Speaker User Manual

June 12, 2024
niceboy

raze SUPERSONIC XL
User Manual / Wireless Speaker

PACKAGE CONTENTS

Niceboy RAZE Supersonic XL wireless speaker
USB-C charging cable
Audio cable
Instruction manual

PRODUCT DESCRIPTION

  1. Volume reduction button
  2. Lighting control
  3. TWS button / mode switch
  4. Play / Pause / Answer / End /Reject call / Last dialed number
  5. Volume increase button
  6. Operating LED indicator
  7. Previous track button
  8. On / Off
  9. Next track button
  10. LED charging indicator
  11. 3.5 mm AUX jack input
  12. Charging USB – output, port for a USB flash disk
  13. Micro SD card slot
  14. USB-C charging port

CHARGING

We recommend that you fully charge the speaker before using it for the first time to maximize battery life. A full charging takes approximately 3 hours. Low battery is indicated by an audio signal. To charge the speaker‘s battery, plug the supplied USB-C cable into the charging port (14) and connect it to any charging adapter (5 V voltage and at least 1 A output current) or to a USB port in a PC. You can follow the charging progress thanks to the 4 charging LED diodes (10), after a full charge is complete, all 4 diodes will be lit.

POWER ON / OFF

To turn the speaker on or off, press and hold button (8) for 3 seconds.
If the speaker is left inactive, it will turn off automatically after 15 minutes to save power.

CONNECTING TO A DEVICE

  1. Press and hold the on/off button (8) for 3 seconds to turn the speaker on. The speaker is now in pairing mode for wireless connectivity. Pairing mode is indicated by the flashing of the operating LED (6).
  2. Activate Bluetooth on your device. Select “Niceboy RAZE Supersonic XL” in the list of available devices.
  3. The device will connect to the speaker. A successful pairing is indicated by a tone and the operating LED (6) lighting up.
    When switched on again, the speaker automatically connects to the last paired device.

PLAYBACK

To start or pause a track, short-press button (4). Control the volume by short- or long-pressing button (1) or (5). Short-pressing button (7) or (9) skips to the next or previous track.

AUX MODE

  1. Plug the enclosed 3.5 mm jack cable into the audio port (11); the speaker will automatically switch to the corresponding mode.
  2. Control what music the speaker plays using the device the speaker is connected to.
    Control the volume by short- or long-pressing button (1) or (5).

USB FLASH DRIVE AND MICRO SD CARD

Insert a data storage device into the corresponding port (12), (13).
The speaker automatically switches to playback mode, indicated by a tone.
To start or pause a track, short-press button (4). Control the volume by short- or long-pressing button (1) or (5). Short-pressing button (7) or (9) skips to the next or previous track.
The device supports data storage devices with a maximum capacity of 32 GB and MP3, WMA, WAV audio format.

FM MODE

Connect the supplied USB-C cable to the charging port (14), it serves as an antenna.
Short press the button (3), the FM mode will announce an acoustic prompt; long press the button (4) to search and automatically store stations. You end the automatic search with a short pressing the same button (4). After completing the search, switch between stations by briefly pressing buttons (7) and (9).

PHONE CALLS

To answer and afterwards end a phone call, press button (4). Long-press the same button to reject an incoming call. Press the button twice to redial the last number called.

LIGHTING MODES

Pressing button (2) switches between individual colour modes. Long-pressing the button turns
the light off, short-pressing turns it back on.
Note: Power consumption increases when a lighting mode is active.

TRUE WIRELESS (TWS) CONNECTION

True Wireless (TWS) technology enables you to connect two Niceboy RAZE Supersonic XL speakers and play music simultaneously in stereo.

  1. Turn both Niceboy RAZE Supersonic XL speakers on and make sure they are not connected to any Bluetooth device (mobile, notebook etc.).

  2. Long-press button (3) on one of the speakers.
    A tone will indicate a successful interconnection of the speakers.

  3. You can now open Bluetooth settings on your device. Select “Niceboy RAZE Supersonic XL” in the list of available devices. A tone will indicate a successful pairing..

FACTORY SETTINGS

In case of technical problems, reset the speaker to factory settings. The speaker must be turned on. Press and hold button (8) for 8 seconds. The speaker will turn off then back on again. The reset is now complete.

PARAMETERS

BT version: 5.0
Frequency band: 2.4 GHz
Radiofrequency power: ≤ 2.5 mW
Transmission range: 10 meters
Supported codecs: SBC
Supported profiles: A2DP, AVRCP, HFP
Power output: 24 W
Impedance: 4 Ω
Sensitivity: >88 dB
Frequency range: 100 Hz – 10 kHz
Supported data storage devices: USB flash drive, micro SD card, max. 32 GB
Supported audio formats: MP3, WMA, WAV
Battery: Li-Ion 2400 mAh
Battery life: 12 hours (at 50% volume)
Waterproofness: IPX6

SAFETY INFORMATION

Listening to music at very high volume can damage your hearing. Do not expose the device to fluids or humidity. Do not expose the device to extreme temperatures or try to disassemble it. Protect the device from sharp objects and falls from height. Batteries – improper handling (prolonged charging, short circuit, breakage by other objects, etc.) may result in fire, overheating or battery leakage.
The battery or accumulator that may be included with the product has a service life of six months, as it is a consumable. The manual is available for download in electronic form at www.niceboy.eu in the support section. NICEBOY s.r.o. hereby declares that radio device type Niceboy RAZE Supersonic XL complies with Directives 2014/53/EU, 2014/30/EU, 2014/35/ EU,and 2011/65/EU. The full EU Declaration of Conformity is available at the following website: https://niceboy.eu/en/raze-supersonic-xl

INFORMATION FOR USERS ON DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT

(HOUSEHOLDS)

The above symbol on the product or accompanying documentation means that used up electrical or electronic products must not be disposed of as communal waste. To dispose of the product correctly, bring it to designated waste collection points, where it will be disposed of free of charge. Proper disposal of the product helps preserve valuable natural resources and prevent potential negative impact on the environment and human health caused by improper waste disposal. For more information, contact local authorities or the nearest waste collection point. Improper disposal of this type of waste may result in a fine pursuant to national legislation.
Information for Users on Disposal of Electrical and Electronic Equipment (Corporate Use) To properly dispose of electrical and electronic equipment for corporate use, contact the manufacturer or importer of the product. They will provide you information on disposal methods for the product and will inform you on who is obligated to fund the disposal of the electrical device based on the date the product was put on the market. Information on Disposal in Countries outside the European Union. The above symbol only applies in EU countries. To properly dispose of electrical and electronic equipment, request more information from your local authority or the seller of the product.

MANUFACTURER:
NICEBOY s.r.o., 5. kvetna 1746/22, Nusle, 140 00,
Praha 4, Czech Republic, ID: 294 16 876.
Made in China.

Documents / Resources

| niceboy raze SUPERSONIC XL Wireless Speaker [pdf] User Manual
raze SUPERSONIC XL Wireless Speaker, raze SUPERSONIC XL, SUPERSONIC XL, SUPERSONIC XL Wireless Speaker, Wireless Speaker, Speaker
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals