TENNANT 9014819 3-Speed Blower User Manual

TENNANT 9014819 3-Speed Blower

Product Information

• Model Part No.: 9014819 – 120V
• 3-Speed Blower
• Website: www.tennantco.com/manuals
• Revision: 9014989 Rev. 00 (10-2016)
• Language: English

Introduction This manual is provided with each new model and contains operation and maintenance instructions, as well as replacement parts information. It is important to read all instructions before using this machine for the best results.

Unpacking Machine When unpacking the machine, carefully check for any signs of damage. If any damages are found, report them immediately to the carrier. Ensure that all parts and accessories are included. If any items are missing, contact the distributor or Tennant for assistance.

Protect the Environment Dispose of packaging materials and used machine components in an environmentally safe manner according to your local waste disposal regulations. Remember to recycle whenever possible.

Intended Use This machine is designed for commercial use in hotels, schools, hospitals, shops, offices, and rental businesses. It is specifically intended for drying carpets, hard floors, and other interior areas. It can also be used for ventilation and cooling purposes. Please note that this machine should not be used outdoors and should only be used as described in the manual.

Machine Data Please fill out the provided information at the time of installation for future reference. This includes Model No., Serial No., and Installation Date. To ensure full warranty protection, complete the attached MACHINE INSTALLATION / WARRANTY REPORT REPLY CARD and return it to Tennant within 30 days of purchase.

Important Safety Instructions When using this electrical appliance, it is important to follow basic precautions to reduce the risk of fire, explosion, electric shock, or injury. These precautions include:

• Read all instructions before using the machine.
• Use only as described in the manual and with the manufacturer’s recommended attachments.
• Avoid operating the machine near flammable liquids, vapors, combustible dust, or materials that can catch fire.
• Connect the machine only to an outlet provided with a ground fault circuit interrupting device.
• Unplug the cord from the outlet when not in use and before cleaning or servicing the machine.
• Do not allow children to use the machine as a toy.
• This machine is not intended for use by individuals with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge.
• Do not use the machine with a damaged cord or plug. If the appliance is not working properly, has been dropped, damaged, or left…

INTRODUCTION

This manual is furnished with each new model. It provides necessary operation and maintenance instructions and replacement parts information.
Read all instructions before using this machine.

• This machine will provide excellent service. However, the best results will be obtained at minimum costs if:
• The machine is operated with reasonable care.
• The machine is maintained regularly – per the maintenance instructions provided.
• The machine is maintained with manufacturer-supplied or equivalent parts.
• To view, print or download manuals online visit www.tennantco.com/manuals

UNPACKING MACHINE
Carefully check the machine for signs of damage. Report damages at once to the carrier. Check machine contents to ensure all parts and accessories are included. Contact the distributor or Tennant for missing items.

PROTECT THE ENVIRONMENT
Please dispose of packaging materials and used machine components in an environmentally safe way according to your local waste disposal regulations.
Always remember to recycle.

INTENDED USE

This machine is intended for commercial use, for example in hotels, schools, hospitals, shops, offices and rental businesses. The machine is designed for drying carpets, hard floors and other interior areas. It can also be used to ventilate and cool areas. It should not be used in outdoor areas. Do not use this machine other than described in this manual.

MACHINE DATA

Please fill out at time of installation for future reference.

• Model No. –
• Serial No. –
• Installation Date –

IMPORTANT : To ensure full warranty protection, fill out the attached MACHINE INSTALLATION / WARRANTY REPORT REPLY CARD and return to Tennant within 30 days of purchase.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE
WARNING – To reduce the risk of fire, explosion, electric shock, or injury:

1. Use only as described in this manual. Use only the manufacturer’s recommended attachments.
2. Do not operate this machine near flammable liquids, vapors, combustible dust or material capable of catching fire such as drapes, etc.
3. Connect only to an outlet provided with a ground fault circuit interrupting device.
4. Unplug cord from outlet when not in use and before cleaning or servicing the machine.
5. Do not allow to be used as a toy. Close attention is necessary when used near children.
6. This machine is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge.
7. Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped in water, return it to a service center for repair.
8. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Keep cord away from heated surfaces.
9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
10. Do not handle plug or appliances with wet hands.
11. Do not use an extension cord with this appliance.
12. Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair and anything that may reduce air flow.
13. Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
14. Always operate the appliance on a stable flat surface such as the floor.
15. Do not use this appliance with any solid-state speed control device.
16. Do not operate appliances without safety devices in place.
17. Turn off all controls before unplugging.
18. All repairs must be performed by a qualified service person. Use only manufacturer-supplied or equivalent replacement parts.
19. Do not use outdoors. Do not expose appliance to rain or moisture. Store indoors.
20. Connect to a properly grounded outlet only. See Grounding Instructions.
21. This appliance is thermally protected.
22. To avoid severe or fatal shock, all electrical cords and components must be kept dry at all times.

SAVE THESE INSTRUCTIONS

SAFETY LABEL

The safety label appears on the machine in the location indicated. Replace label if it is missing or becomes damaged or illegible.

GROUNDING INSTRUCTIONS

This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment- grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING – Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.
This appliance is for use on a nominal 120 volt circuit and has a grounding attachment plug that looks like the plug illustrated below. Make sure that the appliance is connected to an outlet having the same configuration as the plug. No adaptor should be used with this appliance.
WARNING – The replacement or repair of damaged wiring should only be performed by a qualified electrician or service engineer from the original distributor or authorized service agent.

MACHINE COMPONENTS

1. 3- Speed Switch
2. Carrying Handle
3. Power Cord Storage
4. Air Outlet Vent
5. Air Intake Vent
6. Kick Stand
7. Wheel Cart (optional)

MACHINE OPERATION

1. Select a suitable location for the machine.

2. Ensure the machine is in a safe operating location. Do not place machine in a puddle and make sure it is protected from drips and splashes.

3. Plug the power cord into a grounded electrical outlet. Always unwind power cord completely before operating machine. Inspect power cord for damage before each use. Replace cord immediately if damaged.
   Place the machine in the desired operating position.

4. A. Horizontal – dry floors and carpets.

5. B. Tilted – dry floor finishes, paint, etc.

6. C. Vertical – dry wall and ceiling.

7. Set the desired speed by turning switch.

8. Check for proper operation before leaving the machine unattended. Do not move or carry the machine when it is operating.

9. To shut-off machine, turn the switch to the off (O) position.

10. The machine is equipped with an automatic reset motor overload shut-off thermal sensor to protect motor from overheating. Should the shut-off thermal sensor trip, it will reset automatically when the motor has cooled sufficiently, usually after 15 -30 minutes.

MACHINE MAINTENANCE

To keep machine in good working condition, simply perform the following maintenance procedures.
WARNING : Unplug cord from outlet when not in use and before servicing machine.

1. Inspect power cord for damage after each use. Replace power cord immediately if damaged.
2. Clean machine with a damp cloth.
3. Check for dust accumulation around the air inlet and outlet vents and clean if necessary. Blocked vents will cause the motor to overheat, and may lead to premature failure. Warranty claims for this type of damage will not be accepted.

STORING AND TRANSPORTING MACHINE

Neatly wrap power cord and store machine in a cool dry area. Do not expose to rain, store indoors.
Stack machines for storage as shown.
CAUTION : Do not stack beyond four high. Do not stack during transporting and secure with strap.

SERVICING MACHINE
To maintain operational safety and reliability have the machine checked annually or every 250 hours of use by an Authorized Service Center.

TROUBLESHOOTING

WARNING: Unplug cord from outlet when not in use and before servicing machine.

If machine fails to operate:

• Check power cord for damage.
• Check plug connection.
• Check building circuit breaker.
• Thermal sensor shut-off – wait 15-30 minutes to cool.
• Contact service center.

MACHINE SPECIFICATIONS

38.1 cm x 47 cm x 45.7 cm

Weight| 22.5 lb / 10.2 kg
Voltage / Frequency| 120 V / 60 Hz
Motor Rating| .6 HP, 522 W, 4.35 A
Maximum Air Flow| 1350 cfm / 38.2 m3/min
Speeds – Low/Med/High| 710 rpm/1105 rpm/1550 rpm
Power Cord Length| 18.5 ft / 5.6 m
Sound Pressure Level LpA| 69 dBA
Protection Grade| IP20

PARTS LIST

screws, 3 – .321 flat

washers, 3 – .321 x 24 nylon nuts)

| 1
6| 9014970| Fan [Blower]| 1
7| 9014972| Grill, Discharge [Blower]| 1
8| 9014971| Leg, Stand, Kit [Blower] (Includes 4 phil pan hd #8 x .625 black screws)| 1
9| 9014973| Panel, Switch, w/ Label [Blower]| 1
Ñ         10| 9014978| Switch, Knob, Kit [Blower] (Includes 2 – phil hd zinc m4 x 6m screws, 2 – phil pan hd #8 x .625 blk screws, bracket, switch wire)| 1
Y             11| 9015168| Knob, Switch [Blower]| 1
12| 9014982| Cord, Power, 18/3 SJTW, 20 FT [Blower]| 1
13| 1075103| Label, Warning [Expl, Fire, Shk En/Fr/Es]| 1
Ñ         14| 9014821| Handle, Wheel, Kit [Blower] (OPTION)| 1
Y             15| 9014979| Handle, Screw, Kit [Blower]| 1
Y             16| 9014981| Handle Hdwr, Kit [Blower] (Includes 4 – 10- 32 mch screws, 4 – well nut inserts)| 1
Y             17| 9014980| Wheel, Axle, Kit [Blower] (Includes 2 – m10 x 1.5 nyl insert nuts)| 1

www.tennantco.com/manuals

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>