hama 00084422 Projector Mount Instruction Manual
- June 12, 2024
- Hama
Table of Contents
- hama 00084422 Projector Mount
- Product Information
- Product Usage Instructions
- Required tools
- Installation kit
- Explanation of Warning Symbols and Notes
- Package Contents
- Safety Notes
- Intended use and specifications
- Installation requirements and installation
- Setting and maintenance
- Warranty Disclaimer
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hama 00084422 Projector Mount
Product Information
- Product Name: Projector Mount Projektor-Halterung
- Model Number: 00 084422
- Brand: Hama Maximum Load Bearing
- Capacity: 35 kg Screen Size
- Compatibility: 48.0 – 122.0 cm (19 – 48 inches)
- Depth Compatibility: 4.8 – 29.9 cm Projector Plate Angle: Adjustable Carrying Arm Angle: Adjustable Distance to Ceiling: Adjustable Installation Kit Included: Yes
Product Usage Instructions
Required Tools
- Installation Kit (included)
- M6x16 Screw (x1)
- M8 Screw (x1)
- M6 Screw (x8)
- M6x35 Screw (x3)
- M6x35 Screw (x2)
- M6x14 Screw (x6)
- M6 Screw (x5)
- M3x14 Screw (x4)
- M4x14 Screw (x4)
- M5x14 Screw (x4)
Safety Notes
- Before installation, check that the TV Equipment Box assembly set is complete and none of the parts are faulty or damaged.
- Maximum load bearing capacity of the mount is 35 kg.
- Compatible screen sizes range from 48.0 cm to 122.0 cm (19 to 48 inches).
- The depth compatibility of the mount is 4.8 cm to 29.9 cm.
- The projector plate angle and carrying arm angle are adjustable.
- The distance to the ceiling is adjustable.
Installation Requirements and Installation
- Ensure you have all the required tools and the installation kit.
- Follow the provided instructions for the specific installation method:
Ceiling Mounting
- Use the C1, C2, and B3 components for installation.
- Refer to steps 6a, 6b, 7a, and 7b in the user manual for detailed instructions.
- Ceiling Mounting with Telescopic Arm
- Use the C1, C2, and B3 components for installation.
- Refer to steps 8a and 8b in the user manual for detailed instructions.
Wall Mounting
- Use the C1, C2, D1, and D2 components for installation.
- Refer to steps 8a and 8b in the user manual for detailed instructions.
Setting and Maintenance
- Adjust the bracket with the help of a second person for safety.
- Follow the maintenance instructions provided in the user manual.
- Clean the mount regularly using water or standard household cleaners.
Warranty Disclaimer
- Hama GmbH & Co. KG does not assume liability or provide a warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and safety notes. Please refer to the user manual for more detailed instructions and illustrations. Keep the user manual in a safe place for future reference.
Required tools
Installation kit
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely.
Please keep these instructions in a safe place for future reference. If you
sell the device, please pass these operating instructions on to the new owner.
Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention
to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
Package Contents
- Projector bracket
- Installation kit (see contents, Fig. 1)
- These operating instructions
Note
Please check that the TV Equipment Box assembly set is complete before
installation and ensure that none of the parts are faulty or damaged.
Safety Notes
Warning
- Given the multitude of terminal devices and wall structures available on the market, the supplied mounting kit is unable to cover every option.
- In some cases, the screws for attaching the terminal device to the product on the wall bracket are too long.
- Please note that the supplied wall plugs are for use with concrete brick and solid brick walls only.
- Read the operating instructions for your terminal device before attempting to mount it. The instructions provide information about the type and measurements of suitable fastening materials.
- If the supplied mounting kit does not contain suitable fastening materials for mounting the terminal device, purchase these from a specialised dealer.
- If the installation surface on which the bracket is to be mounted is made of different materials or construction types to those specified, purchase suitable mounting materials from a specialised dealer.
- Never apply force during installation. This may damage your terminal device or the product.
- If in doubt, have this product mounted by a qualified technician – do not attempt to mount it yourself!
- Do not mount the product above locations where persons might linger.
- Once you have mounted the product and the attached load, check that they are sufficiently secure and safe to use.
- You should repeat this check at regular intervals (at least every three months).
- When doing so, ensure that the product does not exceed its maximum permitted carrying capacity and that no load exceeding the maximum permitted dimensions is attached.
- Make sure that the product is loaded symmetrically.
- During adjustment, ensure that the product is loaded symmetrically and that the maximum permitted carrying capacity is not exceeded.
- Maintain the necessary safety clearance around the attached load (depending on the model).
- In the event of damage to the product, remove the attached load and stop using the product.
Intended use and specifications
- The bracket is used for wall mounting projectors for non-commercial, private household use.
- The bracket is only intended for use within buildings.
- Use the bracket only for the intended purpose.
Maximum load bearing capacity: | 35 kg |
---|---|
Screen size: | 48.0 – 122.0 cm (US: 19″ – 48″) |
Depth: | 4.8 – 29.9 cm |
Projector plate angle: | -/+ 30° (depends on the device) |
Carrying arm angle: | -/+ 90° (depends on the device) |
Distance to the ceiling: | 13.0 – 63.5 cm |
Installation requirements and installation
Note
- Only mount the bracket with the help of a second person. Get the support and help you need.
- Different end devices have different options for connecting cables and other devices. Before installation, ensure that the necessary connections will still be accessible after installation.
- The same mounting kit is included with all of our TV brackets. Depending on the product and mounting type, you may not need to use the entire mounting kit. Unneeded screws and other small parts may be left over, even if the bracket is properly mounted. Keep the leftover parts and the operating instructions in a safe place, in case you might need them later on (e.g. should you move, sell the product, mount the bracket in a different location, buy a device, etc.).
Warning
- Before installing the bracket, ensure that the wall on which the television is to be mounted is suitable for the weight and make sure that no electrical wires, water, gas or other lines are located at the installation location.
- Please note that the provided wall anchors are only approved for concrete and solid brick walls.
- Observe the other warnings and safety instructions.
- Proceed step-for-step in accordance with the illustrated installation instructions (Fig. 1 ff.).
- During installation, secure the mounting screw in such a way as to ensure that the Bracket can still be rotated.
Setting and maintenance
Note
Only adjust the Bracket with the help of a second person. Get the support and
help you need.
- Screws do not have to be loosened for rotating movement.
- To adjust the inclination, loosen the knurled screw slightly, set the desired angle and retighten the screw securely.
- Check that the bracket is secure and safe to use at regular intervals (at least every three months). Only use water or standard household cleaners for cleaning.
Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.
Hama GmbH & Co KG
86652 Monheim / Germany
Service & Support
www.hama.com
+49 9091 502-0
All listed brands are trademarks of the corresponding companies. Errors and
omissions excepted,
and subject to technical changes. Our general terms of delivery and payment
are applied.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>