PROGRESS LIGHTING P350243-31M Laramie Flush Mount Ceiling Light Instruction Manual
- June 12, 2024
- PROGRESS LIGHTING
Table of Contents
PROGRESS LIGHTING P350243-31M Laramie Flush Mount Ceiling Light
PACKAGE CONTENTS
OVERVIEW
HARDWARE CONTENTS (not actual size)
Safety Information
Please read and understand this entire manual before attempting to assemble, operate or install the product.
- CAUTION: Read instructions carefully and turn the electricity off at the main circuit breaker panel before beginning installation.
- CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure the correct branch circuit conductor.
- WARNING: f any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.E.C requirements. If there are any questions, contact a qualified electrical contractor.
- CAUTION: All glass is fragile. Use care when handling glass shades and bulbs.
Preparation
- Before beginning installation, make sure all parts are included using the contents diagrams from page 1. If any part is missing or damaged, do not attempt to assemble, install or operate the product.
- Estimated assembly time: 30 minutes.
- Tools required for assembly (not included): Phillips screwdriver, pliers, wire stripper, safety glasses, electrical tape, ladder.
Care and Maintenance
Shut off the main power supply before cleaning the product or changing light bulbs. To clean, wipe with a damp cloth. Do not use abrasive cleaners or cleaners that contain alcohol.
Assembly Instructions
- Loosely thread the screws (AA) and the hex nuts (DD) onto the back plate (CC).
- Attach this assembly to the outlet box using the mounting screws supplied with the outlet box (not provided). Tighten securely.
- Strip 3/8″ of insulation from the electrical wire ends. Using wire nuts (BB), connect the WHITE fixture wire to the WHITE supply wire from the outlet box; connect the BLACK fixture wire to the BLACK supply wire from the outlet box. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the round mounting plate. Push all of the wire connections carefully into the outlet box.
- Slide the mounting holes in the fixture (A) over the screws (AA) and using the cylinder nuts (E), tighten the fixture against the ceiling surface.
- Attach the glass shade (B) to the socket of the fixture (A) and use the socket ring (C) to secure it tightly. Thread the lamps (not included) into the fixture sockets.Use 60-watt MAX incandescent medium base lamp, SBCFL or SBLED.
WARRANTY
WARRANTY AND EXCLUSIVE REMEDY
Progress products, when properly installed and under normal conditions of
use, are warranted to our customers only to be free from defects in material
and workmanship at the time of shipment. All warranty claims must be asserted
within one year from of date of purchase of the subject items; thereafter,
warranty claims will not be honored. Customers’ sole remedy for a warranty
claim or otherwise shall be limited to repair or replacement of the subject
product if it is shown to have been defective in material or workmanship at
the time of shipment. Progress’s sole and maximum liability for a defective
product shall never exceed the cost of the subject product. EXCEPT FOR SUCH A
WARRANTY AND EXCLUSIVE REMEDY AS STATED (AND THE EXPRESS WARRANTY OF TITLE),
WE DISCLAIM ALL OTHER WARRANTIES, WHETH EXPRESS OR IMPLIED, AND SPECIFICALLY
DISCLAIM THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A WEN FUR O
SESH AN EVEN SET ME A ESTER B F PO GO ON I IN E E IN MY OR PA OD ARRAS CONE IT
FEEL GENE RECUR I I E O F OH THE SO I IS E PO A LIE PEA I A R O SAL
SCHNETHIERLANCIDENTALOR customer’s sole and exclusive remedy against us for
breach of the warranty, breach of contract or negligence or strict liability
or otherwise shall be limited to repair or replacement of the subject product
at our option (excluding installation and removal charges which shall not be
our if liability) or, if we choose, refund of the purchase price. In no case
does our warranty and exclusive remedy extend to anybody other than our
customers? Our customers are not authorized to extend warranties or remedies
on our behalf to anyone. Such unauthorized extensions of warranties or
remedies by the customer shall remain the customer’s responsibility. The
customer is responsible for determining the suitability of our products for
the customer’s use or resale, or for incorporating them into objects or for
applications that the customer designs, assembles, constructs, or
manufactures.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>