KeTeR 17199416 Storage Box User Manual
- June 12, 2024
- Keter
Table of Contents
KeTeR 17199416 Storage Box
Product Information
The Store-It-Out Max is a shed designed for outdoor use. It has a capacity of 240L or 63 gallons. The shed is not intended for commercial use. It comes with various parts and code letters for easy identification. The assembled size may vary slightly from the specified dimensions due to production variations. The shed requires two people for assembly. Additional small parts may be included in the packaging for use as spare parts.
Product Usage Instructions
- Before starting assembly, level the ground surface where the shed will be placed.
- Review the care and safety guidelines provided at the end of the manual.
- Check for any missing or damaged parts before starting assembly.
- Remove all parts from the package(s) and spread them out on a clean work surface.
- Assemble all the parts according to the directions in the manual. Do not skip any steps.
- Follow the step-by-step instructions provided in the manual to assemble the shed.
- Some parts require clicking or connecting together. Ensure they are securely attached.
- If shelves are desired, purchase a wooden plank and use it as a shelf. The maximum weight capacity per shelf is 20kg or 45lb.
- If assistance with assembly or replacement parts is needed, visit the website or contact Customer Service. Do not return the product to the store.
For warranty activation, log onto the website and fill in the form under warranty activation.
Note: For more detailed instructions and specific part codes, please refer to the complete user manual provided with the product.
Thank you for your purchase of the Keter shed. In order to activate your warranty, please log onto our website and fill in the form under warranty activation.
IMPORTANT
RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
For outdoor use only. Not for commercial use
LEVEL THE GROUND SURFACE
REQUIRED TOOLS
BEFORE STARTING ASSEMBLY
Read the care and safety guidelines at the end of this manual | Check to ensure that there are no missing or damaged parts BEFORE starting or arranging assembly | Remove all parts from the package(s) and spread them out on a cleanwork surface | Review all assembly instructions Assemble all the parts according to the directions in this manual. Do not skip any steps.
SHED PARTS
Code letters are imprinted on each part for easy identification
Packaging may contain some additional small parts for use as spare parts
NOTE: Due to variations in production, the actual assembled size may vary slightly from the specified dimensions.
ASSEMBLY REQUIRES TWO PEOPLE
OPTION
Shelves
CARE AND SAFETY GUIDELINES
- The shed is intended for storage purposes only. It is not designed for habitation.
- It is strongly recommended to secure the shed to an immovable object or anchor to the ground by drilling holes in the shed floor (at the pre-marked locations) and inserting proper screws into the ground (screws are not included).
- Do not attempt assembly on windy or cold days.
- Periodically check the shed to ensure that it is stable and that the site is level.
- Be careful when handling parts with steel edges.
- When assembling or handling the shed, use only those tools listed in the user manual.
- Always wear work gloves, safety goggles and long sleeves when assembling or performing any maintenance on your shed.
- Avoid using a lawnmower or mechanical scythe near the shed.
- Wear safety goggles and always follow the manufacturer’s instructions when using power tools.
- Wash the shed with a garden hose or a mild detergent solution. Do not use a stiff brush or abrasive cleaners, including degreasers and oil- or acetone-based cleaning materials, as these may stain or damage the shed.
- Do not store hot items, such as recently used grills and blowtorches, and volatile chemicals in the shed.
- Avoid placing heavy items against the walls, as this may cause distortion.
- Keep the roof clear of accumulated snow and leaves. Large amounts of snow on the roof can damage the shed, making it unsafe to enter.
- Wind direction is an important factor to consider when determining the location of the shed. Reduce exposure to the wind, in general, and of the door side in particular. Keep doors closed and locked when the shed is not in use to prevent wind damage.
- Do not stand on the roof.
- Consult your local authorities to check if permits are required to erect the shed.
2-YEAR LIMITED WARRANTY
Your Keter shed (“the Product”) was manufactured from high-quality, recyclable
materials under rigorous control and supervision. Should a problem occur with
the Product, please address your claim to Keter customer service on our
website
(www.keter.com) or by phone. This warranty covers
product failure resulting from defects in manufacturing or materials for a
period of 2 years from the date of original retail purchase. (The term
“defects” is defined as imperfections that impair the use of the Product).
This warranty does not cover defects resulting from normal wear and tear,
including, but not limited to, scuffing, scratches or fractures caused during
use, discoloration or fading, rusting, unreasonable use, abuse, negligence,
alterations, painting, moving, transporting or relocating the Product, “acts
of Nature”, including, but not limited to, hail, any type of storm, flood and
fire, and consequential or incidental damages. Assembly and handling not in
accordance with the recommendations, guidelines and restrictions as described
in the Product’s user manual, and usage for commercial or public applications,
will void this warranty. Keter is not responsible for any damage incurred by
third parties or damage to or loss of objects inside or near the shed.
WARRANTY ACTIVATION
For assistance with assembly, or to request replacement parts, log onto our
website or call Customer Service.
DO NOT RETURN THE PRODUCT TO THE STORE.
TEL.031-767-2492 FAX.031-717-2497
E-[email protected]