Benjara BM159073 Gray Wood 5 Shelf Corner Bookcase Instruction Manual
- June 12, 2024
- Benjara
Table of Contents
Benjara BM159073 Gray Wood 5 Shelf Corner Bookcase
Product Information
| Part | Description | Quantity |
|---|---|---|
| A | Side Panel | 1 PC |
| B | Bottom Panel | 1 PC |
| C | Cross Panel | 4 PCS |
| D | Top Panel | 1 PC |
| E | Back Panel | 1 PC |
Product Usage Instructions
Assembly Tips
- Remove hardware from box and sort by size.
- Please check to see that all hardware and parts are present prior to start of assembly.
- Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
Warnings
- Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.
- This product is for home use only and not intended for commercial establishments.
Assembly Time: 40 minutes
PARTS IDENTIFICATION
HARDWARE IDENTIFICATION
NOTE:
Phillips head screw driver is required in the assembly process; however,
manufacturer does not provide this item.
Assembly Steps:
Step 1: Apply glue on all wooden dowels to ensure integrity of the structure.
Parts Used:
| Part | Quantity |
|---|---|
| A | 2 |
| C | 4 |
| E | 1 |
Step 2: Apply glue on all wooden dowels to ensure integrity of the structure.
Parts Used:
| Part | Quantity |
|---|---|
| C | 3 |
| E | 1 |
Step 3: Apply glue on all wooden dowels to ensure integrity of the structure.
Parts Used:
| Part | Quantity |
|---|---|
| A | 1 |
| C | 5 |
| E | 1 |
Step 4: Apply glue on all wooden dowels to ensure integrity of the structure.
Parts Used:
| Part | Quantity |
|---|---|
| D | 1 |
| E | 1 |
| A | 1 |
Step 5: Complete assembly.
Parts Used:
| Part | Quantity |
|---|---|
| B | 1 |
DIMENSION
Note : Dimension tolerance ±5%
Anti-Tipping Installment Instructions
Furniture Tipping Restraint Warning:
Injury may result from tipping furniture. This restraint may protect against tipping furniture. Do not allow children to climb on furniture. This restraint is not a substitute for proper adult supervision. Failure to detach this restraint before moving the furniture may result in injury and damage.
Installation Steps:
- To attach the anti-tip strap, securely mount one end to the top of the case piece with the 5/8 screw.
- Position the case piece against the wall in the desired location.
- Pull the anti-tip strap taut and mark the position of where you will secure the other end on the wall.
- Drill a 1-1/4 hole in the spot you marked.
- Tap in plastic wall plug.
- Fasten anti-tip strap with wall screw provided. (Please install the anti-tipping kit in the middle of the case piece if only have one set of anti-tipping kit.)
Wall Diagram:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>