Yooning MP-2500 Microplate Centrifuge Instruction Manual
- June 12, 2024
- yooning
Table of Contents
**Yooning MP-2500 Microplate Centrifuge Instruction Manual
**
General Information
Thank you for purchasing our Product.
This Manual for users contains function and operation of the Instrument. In
order to use the instrument properly, please read this manual carefully before
operation.
Please check the instrument and accessories with the packing list at the first time you open the instrument packing case.
Introduce
MP-2500 is a transient centrifuge designed for microplates, which is convenient for the wall drops. It is suitable for 96-well, 384 and small- capacity micro plates, as well as skirts and various standard PCR microplates.
Operation Guide
The Structure
Fane Plate and Display
Key functions
Press the up and down key to set the time.
The Short button
The start/stop button
The Operation
Timer Setting
a) When the Instrument powers on, it starts self-checking with the sound of
de…
b) About 1s later, 10:00 in the time display is the last set time.
c) Press or to set the timer. Long press to set the time quickly.
The Touch
Press , it will run with the max. speed. When it reaches the maximum speed, the timer begins to work. It decelerates to stop when. releasing button
The Start/Stop
Close the lid after setting the time. Then press to run. When it reaches the maximum speed, the timing begins. Press the button during the running, it will decelerate to stop with 3 sound of de…
Note:
- It doesn’t run with 2 sounds of de… and E1 is displayed if the cover not closing The time will be displayed after closing the cover.
- Do not open the cover before the rotor stops.
- Samples should be placed symmetrically in equal quantities
Safety
- place on a stable work platform
- Don’t move the instrument during operation
Clean
Clean the instrument with a dry cloth and a non-corrosive cleaning solution with a pH of 7 ± 1; Do not immerse the instrument in a liquid or use a liquid to wet the instrument; Ensure that all parts of the instrument are completely dry before running the instrument.
The Parameters
| Voltage | DC24V, 2A | Power | 48W |
|---|---|---|---|
| Speed | 2800rpm | Noise | ≤60dB |
| Max. RCF | 600 xg | Speed Deviation | ≤10% |
| Time | 1~99s | Deceleration rate | ≤6s |
| Dimension (mm) | 220x245x200 | Weight | 2.5kg |
Troubles and Shootings
| Troubles | Causes | Shootings |
|---|
The rotor not
working
| 1. The power cord not plugged in.| Check the power cord
2. No power supply to the socket| Check the socket
3. The switch not turning on| Check the switch
4. The lid Not closed| Check the lid
Noise, severe vibration or abnormal noise after starting up| 1. Not placed on
a horizontal platform| Place it on a horizontal platform
2. Loose screws| ****
Tighten the screws
3. Samples not placed symmetrically| Place the sample symmetrically
E1 error| Lid cant close| Contact supplier
E2 error| Over speed| Contact supplier
E3 error| Motor stalling| Contact supplier
Performance Test
| Item | Microplate Centrifuge | Model | MP-2500 |
|---|---|---|---|
| Date | Serial No. | ||
| No. | Content | Methods | Standards |
| 1 | Basic |
Function
| Visual check| Valid|
□Qualified
2| Appearance| Visual check| Pass| □Qualified
3| Label| Visual check| Pass| □Qualified
4| Speed| Tachometer| 2800±10%rpm|
□Qualified
5| Deceleration
Time
| Calculagraph| T≤6s|
□Qualified
6
| Noise Level| Sound Level Meter| ≤60dB| □Qualified
7| Amplitude| Dial Gauge| ≤0.3mm|
□Qualified
8|
Continuous
Running Test
| Operation| 30 min for 5 times without problem|
□Qualified
Result
|
Remarks:
QC: Confirmer:
Packing List
No.
|
Item
|
Model/Type
|
Quantity
|
Confirm
---|---|---|---|---
1
| Micro Plate
Centrifuge
|
MP-2500
|
1
|
2
| Adapters for
tubes
| |
2
|
3
|
Power Line
|
DC24V
|
1
|
4
|
QC PASS Card
| |
1
|
5
|
Manual
| |
1
|
QC: Date:
Hangzhou Yooning Instrument Co., Ltd.
Address： 4 floor, #6 Building, No.3 Shengang Road,
Yuhang District,Hangzhou, China
Customer Service：+86-571-86907383 / 87613616
Website: www.yooning.com