YGiTK DAC152 4 Channel Compact Professional Headphone Amplifier User Manual
- June 14, 2024
- YGiTK
Table of Contents
DAC152 4 Channel Compact
Professional Headphone Amplifier
DAC152 4 Channel Compact Professional Headphone Amplifier
User Manual
Welcome to YGiTK
Thank you very much for purchasing the DAC152 headphone amplifier.
Please take a few minutes to read the entire manual and keep it for future
reference. Please read and follow the safety instructions on each page. Most
home recordings involve one to four people, and any or all people may need
headphone monitoring. DAC152 adopts high-end IC module, multiple protection,
safety and stability. Excellent circuit design ensures good sound quality and
stable performance. Headphone amplifiers can be used for band rehearsal and
home entertainment. Amplification and independent volume control for up to 4
headphones.
Connection diagram
Control panel
(1234: Using the LEVEL controls you can set the volume level of each headphone
output.
◊ High volume levels can damage your hearing or your headphones. Please turn
down all volume controls to zero (all the way to the left) before you power up
the amp. Always make sure you use appropriate volume levels.
5: Switching mute control of lotus interface: Release this button (pop-up) to
connect the input signal of lotus interface, and press it down to disconnect
the signal and enter the mute state.
6:6.35 interface switching mute control: Release this button (pop-up) to
connect the input signal of 6.35 interface, and press it down to disconnect
the signal and enter the mute state.
7:3.5 interface switching mute control: Release this button (pop-up) to
connect the input signal of 3.5 interface, and press it down to disconnect the
signal and enter the mute state.
8: Stereo / mono switch: this button is used to select whether stereo signal
or mono signal is transmitted to the output channel.
9: When the power switch is pressed, the LED light will be on, and the DAC152
will be in the working state.
Front panel
- Output channel 1: this interface is used to connect the headset to the output channel 1. The output volume of this channel is controlled by the volume control knob of output channel 1 on the upper panel.
- Output channel 2: this interface is used to connect the headset to the output channel 2. The output volume of this channel is controlled by the volume control knob of output channel 2 on the upper panel.
- Output channel 3: this interface is used to connect the headset to the output channel 3. The output volume of this channel is controlled by the volume control knob of output channel 3 on the upper panel.
- Output channel 4: this interface is used to connect the headset to the output channel 4. The output volume of this channel is controlled by the volume control knob of output channel 4 on the upper panel.
Rear panel
- DC power input: this interface is used to connect the power adapter to DAC152
- 3.5 input interface: this interface is used to connect sound source equipment to DAC152 as input signal. The input signal will be distributed to all four output channels
- 6.35 input interface: this interface is used to connect sound source equipment to DAC152 as input signal. The input signal will be distributed to all four output channels
- AV input interface: this interface is used to connect sound source equipment to DAC152 as input signal. This input signal will be distributed to all four output channels
Specifications
Input interface: stereo 3.5 mm TRS interface, stereo AV interface
Input impedance: 22K ohm
Input signal level: + 22dB
Output interface: stereo 1/4″ TRS interface, stereo 3.5 mm TRS interface
Output impedance: 16 ohm minimum
Maximum gain: 19dB / Channel
SNR: > 98dB
Power supply: DC 5V/2A, external power adapter
Note
- if you use AV interface/ 3.5mm interface or 6.5mm interface to connect the sound source, the three input signals will be mixed and distributed to four output channels at the same time, which can be controlled by mute switch.
- In case the volume level of the signal source is set too high, the DAC152 may produce distortion!
Warranty
Thanks for using YGiTK product, all YGiTK product comes with warranty of 18
months from the day of purchase, if you need any support, please feel free to
contact us.
Contact
Email:
KeteyiCustomerService@outlook.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>