PROGRESS LIGHTING P540106-031 1 Light 26.5 Inch Textured Black Outdoor Post Light Instruction Manual
- June 12, 2024
- PROGRESS LIGHTING
Table of Contents
PROGRESS LIGHTING P540106-031 1 Light 26.5 Inch Textured Black Outdoor
Post Light
Package Contents
Hardware Contents (not actual size)
Safety Information
Please read and understand this entire manual before attempting to assemble,
operate or install the product.
CAUTION: Read instructions carefully and turn electricity off at main
circuit breaker panel before beginning installation.
CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified
electrician to ensure correct branch circuit conductor.
WARNING: If any Special Control Devices are used with this fixture,
follow instructions carefully to assure full compliance with N.E.C.
requirements. If there are any questions, contact a qualified electrical
contractor.
CAUTION: All glass is fragile. Use care when handling glass shades and
bulbs.
Preparation
- Before beginning installation, make sure all parts are included using the contents diagrams from page 1. If any part is missing or damage, do not attempt to assemble, install or operate the product.
- Estimated assembly time: 30 minutes.
- Tools required for assembly (not included): Phillips screwdriver, pliers, wire stripper, safety glasses, electrical tape, ladder, drill.
Care and Maintenance
Shut off main power supply before cleaning product or changing light bulbs.
To clean, wipe with damp cloth. Do not use abrasive cleaners or cleaners that
contain alcohol.
Assembl Instructions
-
Place the fixture (A) on the post (not included) and use a pencil to mark the locations of the 3 mounting holes. Remove the fixture from the post and use a drill with a 0.144 (4mm) bit to create mounting holes in the post.
-
Strip 3/8″ of insulation from the electrical wire ends. Using wire nuts (BB), connect WHITE fixture wire to the WHITE supply wire from the pole connection; connect the BLACK fixture wire to the BLACK supply wire from the pole connection.
Connect the fixture ground wire and supply ground wire using a wire nut. Push all wire connections into the post. -
Insert the fixture (A) onto the post and use the mounting screws (AA) to secure the fixture tightly to the post using the holes drilled in step 1.
-
Thread lamp (not included) into the fixture socket. Use a S6B0-LwEDat. t MAX incandescent candelabra base lamp, SBCFL or SBLED.
-
Securely tighten the roof (B) to the fixture (A) using the two flat head screws (C) provided.
WARRANTY
WARRANTY AND EXCLUSIVE REMEDY: Progress products, when properly installed
and under normal conditions of use, are warranted to our customers only to be
free from defects in material and workmanship at time of shipment. All
warranty claims must be asserted within one year from date of purchase of the
subject items; thereafter, warranty claims will not be honored. Customers’
sole remedy for a warranty claim or otherwise shall be limited to repair or
replacement of the subject product if it is shown to have been defective in
material or workmanship at time of shipment. Progress’s sole and maximum
liability for a defective product shall never exceed the cost of the subject
product. EXCEPT FOR SUCH A WARRANTY AND EXCLUSIVE REMEDY AS STATED (AND THE
EXPRESS WARRANTY OF TITLE), WE DISCLAIM ALL OTHER WARRANTIES, WHETHER EXPRESS
OR IMPLIED, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL WE BE
LIABLE TO CUSTOMER IN WARRANTY, CONTRACT, NEGLIGENCE, STRICT LIABILITY OR
OTHERWISE, FOR ANY DAMAGES, WHETHER INCIDENTAL OR CONSEQUENTIAL, WHICH ARE
ALLEGED TO BE CAUSED BY ONE OR MORE OF OUR PRODUCTS, BEYOND THE COST TO THE
CUSTOMER OF THE SUBJECT PRODUCT OR PRODUCTS. Therefore, the customer’s sole
and exclusive remedy against us for breach of the warranty, breach of contract
or negligence or strict liability or otherwise shall be limited to repair or
replacement of the subject product at our option (excluding installation and
removal charges which shall not be our liability) or, if we choose, refund of
the purchase price. In no case does our warranty and exclusive remedy extend
to anybody other than our customers. Our customers are not authorized to
extend warranties or remedies on our behalf to anyone. Such unauthorized
extensions of warranties or remedies by the customer shall remain customer’s
responsibility. Customer is responsible for determining the suitability of our
products for customer’s use or resale, or for incorporating them into objects
or for applications which customer designs, assembles, constructs or
manufactures.
THANK YOU for selecting Progress Lighting We can assist you with questions
regarding product information, assembly or missing parts
800-447-0573
8am-8pm (Eastern), Monday-Friday
customerservice@progresslighting.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>