hama 00200118 USB Hub Instruction Manual
- June 12, 2024
- Hama
Table of Contents
hama 00200118 USB Hub
Product Information
The USB Hub is a device manufactured by Hama GmbH & Co KG. It is a USB-Hub that allows you to expand the number of USB ports on your computer or laptop. It is compatible with both Windows and Mac operating systems and supports USB 2.0 specification. The hub operates at a voltage of 5V with a maximum current consumption of 500mA.
Package Contents
Check the package contents to ensure that it includes the USB Hub.
- USB-A Hub
- These operating instructions
Safety Notes
- Read and follow all safety instructions provided in the user manual.
- Observe all applicable regulations and local disposal requirements.
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
- Do not open the device or continue to operate it if it becomes damaged.
- Do not operate the product outside the power limits given in the specifications.
- Do not modify the product in any way. Doing so voids the warranty.
- Keep this product, as all electrical products, out of the reach of children!Use the product for its intended purpose only.
- Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
- The product is intended for indoor use only.
- Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
- Do not use the product in moist environments and avoid splashes.
- Do not use the product in areas where the use of electronic devices is not permitted.
- Do not drop the product and do not expose it to any major shocks.
- Dispose of packaging material immediately according to locally applicable regulations.
Warning
- Find out the maximum output current capacity of the USB port on your device. To do this, consult the operating instructions or ask the manufacturer.
- Common values are 500 mA for USB-A 2.0, 900 mA for USB-A 3.0, and up to 3000 mA for USB-C.
- Ensure that the cumulative current draw of all USB devices connected to the hub/multiport adaptor does not exceed this value.
Note Run USB receivers (radio / 2.4 GHz wireless) if possible directly on the computer / notebook.
Startup and Operation
- Connect the USB Hub to an available USB-A port on your computer or laptop.
- Ensure that your computer meets the system requirements mentioned in the user manual.
- The USB Hub is compatible with Windows 11, 10, 8, and 7, as well as Mac OS 10.8.
- Switch on your computer and boot the system.
- Connect the product to a free USB port on your computer.
- You do not have to install drivers; the computer will automatically recognise the product.
- If necessary, follow the instructions for your operating system.
- In order to use your devices, plug them into the product one after the other.
Warranty Disclaimer
Hama GmbH & Co KG does not provide any warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and safety notes
Technical Data
Operating voltage / current consumption| 5 V max. 500 mA
Compatibility| USB-A port
System requirements| Windows 11 / 10 / 8 / 7 Mac OS 10.8 ≥
USB specification| USB 2.0
Note If there is interference or the product no longer responds, unplug the product, wait a few seconds and then plug it in again.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>