Lekolar SFOLS16W Fibre Optic Light Source Instruction Manual
- June 12, 2024
- Lekolar
Table of Contents
Lekolar SFOLS16W Fibre Optic Light Source
Product Information:
- Product Name: Fibre Optic Light Source
- Product Code: SFOLS45W
- Input: 220-240V 50/60Hz
- Output: 24V 2.0A
Contents:
- 1 x Light Source
- 1 x Remote Control
- 1 x Adaptor
The Fibre optic tails are purchased separately, we have 1.5m x 150 tails, 2m x 200 tails, and 3m x 200 length tails available.
WARNING! Contains sequences of flashing lights which may affect individuals who are susceptible to photosensitive epilepsy or other photosensitivities.
Made in China.
Product Usage Instructions:
- Connect the provided adaptor to the light source.
- Plug the adaptor into a power outlet with the specified input voltage (220-240V for SFOLS45W or 100-240V for SFOLS16W/SFOK16W).
- The light source will emit a continuous or flashing light depending on the mode selected.
- Use the remote control to adjust the settings, such as brightness level and color options.
- If using fibre optic tails, connect them to the light source according to their length and quantity.
- Position the fibre optic tails in desired locations to create stunning lighting effects.
- Avoid looking directly at the light source or the flashing lights to prevent discomfort or potential health issues.
- When not in use, disconnect the adaptor from the power outlet.
Please refer to the user manual for additional information and safety precautions.
specification
Product Name: Fibre Optic Light Source
Product Code: SFOLS45W
Input: 220-240V 50/60Hz
Output: 24V 2.0A
Contents:
1 x Light Source 1 x Remote Control 1 x Adaptor
The Fibre optic tails are purchased separately, we have 1.5m x 150 tails, 2m x
200 tails and 3m x 200 length tails available.
WARNING!
Contains sequences of flashing lights which may affect individuals who are
susceptible to photosensitive epilepsy or other photosensitivities.
Safety Warnings
- Before setting up your light, ensure the product is not damaged. If any part of the product is damaged, do not attempt to assemble and use.
- Only use the adaptor and light source unit supplied with this product and no other adaptor or light source unit must be used.
- If the product stops working, do not attempt to open the product to fix. Please contact your retailer for further support.
- Do not shine the light source directly in any eyes.
- The light source is not a toy, keep out of reach of children and pets, as it contains small parts which may cause a choking hazard.
- To be used under adult supervision only.
- This light source is for indoor use only and should not be used outdoors. Avoid use in damp or moist conditions.
- Do not allow any part to come into contact with excessive heat or naked flames.
- Carry out regular checks to ensure fixings, fittings and installation has not become loose.
Instructions
- Loosen the Lock Screw on front of the light source.
- Insert the end of the fibre optic tails into the hole in the front of the light source box and tighten the screw to keep these in place.
- The black on/off button is located on the back of the light source.
- Next to the on/off button is the different light mode button.
- Firstly, connect the pin end of the adaptor to the back of the light source. Plug the adaptor to the mains sockets. Switch on from the mains and then press the black button to on.
- Test the remote control to ensure all functions are working.
- This item can be installed in various ways, from ceilings, through walls, along floors. Before installing, please ensure to complete a risk assessment for the product, it’s home and the persons the item is intended to be used by.
Please keep these instructions as it contains important information.
Made in China.
Remote Control Functions
To change battery on the remote control please see instructions on the reverse side of the remote. The remote control requires CR2025 Lithium battery to operate. Please pull out the tab before use.
Battery Warnings! Batteries should only be inserted or changed by an
adult. Non-rechargeable batteries are not to be recharged. Be sure to insert
batteries with the correct polarities and always follow the product and
battery manufacturers’ instructions. Remove batteries from product before
extended storage. Always remove old or exhausted batteries from the product.
The supply terminals are not to be short circuited. Check that the contact
surfaces are clean and bright before installing batteries. Do not mix
different types of batteries. Do not bury or burn batteries. Recycle used
batteries responsibly. Do not mix old and new batteries. Do not dispose of in
household waste.
Warning: Dispose of used batteries immediately. Keep new and used
batteries away from children. If you think batteries might have been swallowed
or placed inside any part of the body, seek immediate medical attention.
Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Supplied By: Playlearn Ltd, 41 Ramsgate Street, Salford, M7 2YL. UK
Tel:0161 737 5099
Website: www.play-learn.co.uk
Help & Support: sales@play-learn.co.uk
References
- Domain name learn.co.uk (learn) is for sale at BuyDomainNames.co.uk
- Playlearn Ltd – Playlearn Ltd – Sensory & Special Needs Toys Manufacturers
- Playlearn Ltd – Playlearn Ltd – Sensory & Special Needs Toys Manufacturers
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>