CHAUVET PROFESSIONAL Maverick Force 2 BeamWash Party Light User Guide

June 12, 2024
Chauvet Professional

CHAUVET PROFESSIONAL Maverick Force 2 BeamWash Party Light

CHAUVET-PROFESSIONAL-Maverick-Force-2-BeamWash-Party-Light-
PRODUCT

Product Information

The Maverick Force 2 BeamWash is a lighting fixture designed for professional use. It features a compact and versatile design that allows for various mounting options. The fixture is compliant with FCC regulations and ensures safe operation in North America and Australia. It comes with a control panel that allows for easy navigation and adjustment of settings. The product is power-linkable, allowing multiple fixtures to be connected together for synchronized operation.
Model ID: MAVERICKFORCE2BEAMWASH

Included Items

  • AC Power
  • AC Plug
  • Connection Wire (U.S.)
  • Connection Wire (Europe)
  • Screw (Black, White, Green/Yellow)
  • Screw (Brown, Blue, Green/Yellow)
  • Screw (Yellow/Brass, Silver, Green)

Safety Notes

It is important to read and follow the safety notes provided in
the user manual. These notes contain important information
regarding installation, use, and maintenance of the Maverick Force
2 BeamWash.

FCC Compliance: The Maverick Force 2 BeamWash complies with Part 15 Part B of the FCC rules. It does not cause harmful interference and accepts any received interference. Any unauthorized changes or modifications may void the user’s authority to operate the equipment.

RF Exposure Warning for North America and Australia: For safe operation, the Maverick Force 2 BeamWash should be installed and operated with a minimum distance of 20 cm between the radiator and the user. It should not be co- located or operated with any other antenna or transmitter.

Product Usage Instructions

Power Connection: To ensure the longevity of the product, it is recommended to completely disconnect the Maverick Force 2 BeamWash from power when not in use. This can be done by switching off the breaker or unplugging the device.
Power Linking: The Maverick Force 2 BeamWash can be power linked with other units for synchronized operation. The maximum number of fixtures that can be linked depends on the voltage. Do not exceed the following limits: 1 product at 100 V, 2 products at 120 V, 4 products at 208 V, 4 products at 230 V, or 4 products at 240 V. Power-linking cables can be purchased separately.
Mounting: Prior to mounting the Maverick Force 2 BeamWash, carefully read the Safety Notes provided in the user manual. Use a minimum of 2 mounting points per product and ensure that the mounting clamps can support the weight of the fixture. The Chauvet line of mounting clamps can be found at http://trusst.com/productcategory/truss-clamps.

Control Panel Description

Button Name Function
Navigates upwards Through the menu list or increases numeric value in a

function
Exits| From the current menu or function
Navigate downwards| Through the menu list or decreases the numeric value in a
function
Navigates leftwards| Through the menu list
Enables| The currently displayed menu or sets the currently selected
value into the selected function
Navigates rightwards| Through the menu list

Safety Notes

  • These Safety Notes include important information about the installation, use, and maintenance of the Maverick Force 2 BeamWash.
  • The luminaire is intended for professional use only.
  • The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 16.4 ft (5 m) is not expected.
  • If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord exclusively available from the manufacturer or its service agent.
  • The light source contained in this luminaire shall only be replaced by the manufacturer or its service agent or a similar qualified person.

CAUTION:

  • Ventilation, if least20 imago can) inform ed Jacena surtadeunt this product in a location with adequate
  • When transferring the product from extreme temperature environments, (e.g., a cold truck to a warm humid ballroom condensation may form on the internal electronics of the product. To avoid causing a failure. allow the product to fully acclimate to the surrounding environment before connecting it to power.
  • Flashing light is known to trigger epileptic seizures. Users must comply with local laws regarding notification of strobe use.

ALWAYS:

  • Disconnect from power before cleaning the product or replacing the fuse.
  • When using an IP65-rated product in an outdoor environment, use IP65- (or higher) rated power and data cable.
  • Replace and secure IP-rated protective covers to all power, data, USB, or other ports when not in use.
  • Replace the fuse with the same type and rating.
  • Use a safety cable when mounting this product overhead.
  • Connect this product to a grounded and protected circuit.

DO NOT:

  • Open this product. It contains no user-serviceable parts.
  • Look at the light source when the product is on.
  • Leave any flammable material within 100 cm of this product while operating or connected to power.
  • Connect this product to a dimmer or rheostat.
  • Operate this product if the housing, lenses, or cables appear damaged.
  • Operate this product outdoors or in any location where dust, excessive heat, water, or humidity may affect it (adhere to standards for the published IP rating).
  • Submerge this product (adhere to standards for the published IP rating). Regular outdoor operation is fine.
  • Permanently install outdoors in locations with extreme environmental conditions. This includes, but is not limited to:
    • Exposure to a marine/saline environment (within 3 miles of a saltwater body of water).
    • Locations where normal temperatures exceed the temperature ranges in this manual.
    • Locations that are prone to flooding or being buried in snow.
    • Other areas where the product will be subjected to extreme radiation or caustic substances.
  • ONLY use the hanging/mounting bracket to carry this product.
  • The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
  • The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
  • To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the
  • product from power via a breaker or by unplugging it. in the event of a serious operating problem. stop using it immediately.

FCC

FCC Compliance
This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure Warning for North America and Australia
Warning! This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and the user. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

What is Included

  • Maverick Force 2 BeamWash
  • 2 omega brackets with mounting hardware
  • Seetronic Powerkon IP65 power cable
  • Quick Reference Guide

AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100-240 VAC, 50/60 Hz.
AC Plug

Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow/Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green

To eliminate unnecessary wear and improve its lifespan, during periods of non- use completely disconnect the product from power via breaker or by unplugging it.

Power Linking
It is possible to power link up to 1 Maverick Force 2 BeamWash products at 100 V, 2 products at 120 V, 4 products at 208 V, 4 products at 230 V, or up to 4 products at 240 V. Never exceed this number. Power-linking cables can be purchased separately.
Mounting
Before mounting this product, read the Safety Notes. Use at least 2 mounting points per product. Make sure the mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps.

Mounting Diagram

CHAUVET-PROFESSIONAL-Maverick-Force-2-BeamWash-Party-Light-FIG-1
\(2\)

Control Panel Description

Button Name Function


| < UP>| Navigates upwards through the menu list or increases the numeric value when in a function
**| < MENU>| Exits from the current menu or function
**
| < DOWN>| Navigates downwards through the menu list or decreases the numeric value when in a function
**| < LEFT>| Navigates leftwards through the menu list
**
| < ENTER>| Enables the currently displayed menu or sets the currently selected value into the selected function
**| < RIGHT>**| Navigates rightwards through the menu list

Maverick Force 2 BeamWash QRG Rev. 1
Model ID: MAVERICKFORCE2BEAMWASH
Scan the QR code to access the product page, warranty terms, and the complete User ManuaI

Contact Us

Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., U. K., Ireland, Mexico, France, Germany, or Benelux, contact the dealer of record.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Chauvet Professional User Manuals

Related Manuals