Runyunteng Technology RYT007 Wireless Portable Quick Charging Power Bank User Manual

Runyunteng Technology RYT007 Wireless Portable Quick Charging Power Bank

Product Information

The product is a charging device for earbuds with multiple charging power options. It supports 5W, 7.5W, 10W, and 15W charging modes, and operates on a 12V-1.67A power supply. The device is designed to meet general RF exposure requirements and can be safely used in portable exposure conditions without any restrictions.

Product Usage Instructions

1. Connect the charging device to a power source using the provided power supply.
2. Place the earbuds on the charging surface of the device.
3. Ensure that the earbuds are properly aligned with the charging area.
4. Select the desired charging mode based on your requirements (5W, 7.5W, 10W, or 15W).
5. Monitor the charging progress to ensure the earbuds are charging effectively.
6. Once the earbuds are fully charged, remove them from the charging surface.

Note: Make sure to follow the manufacturer’s instructions for your specific earbuds model regarding charging and battery maintenance.

(Please read this instruction carefully before using the product and keep it safe)

Product Description

• Model Number: RYT007
• Battery: Lithium Polymer batteries
• Battery capacity: 10000mAh / 37Wh
• Rated capacity: 5800mAh (5V-2.4A)
• Wireless output: 5W/7.5W/10W/15W
• Type-C input: 5V-3A / 9V-2A / 12V-1.5A
• Type-C output : 5V-2.4V / 9V-2.2A /12V1.67A
• USB-A output: 5V-3A/ 9V-2A / 12V-1.5A
• Product Dimensions: 140 × 73.5 × 32.8mm
• Item weight: 316 ‡ 10g

Operation instruction

1. Press the button once – power on
2. Press the button twice – shut down
3. The product shuts down automatically in about 40 seconds when no device being charged.
4. The wireless charging mode is usable only when your device (phone, earbuds or watch) supports the wireless charging.
5. The product will be turned on when it is plugged-in with cord.
6. The product will be turned on when mobile phone is charged in wireless mode (some mobile phones may need to press the button to turn on the product).
7. You need to press the button to turn on the product if you charge the earbuds or watch in wireless mode.

What’s in the box

• Multi-function power bank *1
• User manual *1
• Charging cable *1
• Magnetic iron ring *2
• Magnetic iron ring positioning tool *1

Product Line Composition

Product introduction

This product is a portable charging power bank, providing two charging modes: wired charging, wireless charging for mobile phones, earbuds, watches, tablets, game consoles, etc. This product integrates wired charging, wireless charging, magnetic positioning, two-way type-c quick charging, 15w wireless quick charging. The product has built-in FOD(Foreign Object Detection), overcharge protection, over-discharge protection, temperature protection, and other safety protection circuits.

Usage environment

• Operating temperature: 0°C to 40°C in non-tropical area
• Storage temperature: 0°C to 40°C

Safety & Warning

1. Make sure put the magnetic iron ring positioning tool at the center of the phone and stick the iron ring at the center of the tool. The speed of charging and the magnetic force will be impacted if the iron ring is misaligned. Do not put metal thing at the area of charging, or may not charge.
2. If you find the device is charged intermittently or seriously heating, it 10 may due to the misalign of charging ring, or medal thing inside the phone case. Please try to cool down the phone, take off the phone case, and realign the phone.
3. Please do not disassemble the product, incorrect use or incorrect assembling may damage and reduce the life of the product, and the liability arising therefrom is not warranty liability or manufacturer responsibility.
4. The battery capacity of product is not strictly equivalent to the rechargeable amount due to the energy conversion rate.
5. Charge the product regularly (we recommend you charge at least every 5 months to extend the life of product).
6. If the consumer violates the product manual or improperly uses, the personal and property damage caused by the consumer will take all the consequences, and the company will not take any legal liability.
7. Avoid charging device beyond the capacity of the product (The protection circuit will reject to charge the device).
8. Avoid strong physical effects, including knocking, throwing, trampling, squeezing, etc.

Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. § 15.105 Information to the user.

FCC STATEMENT

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Declaration of toxic and harmful substances in electronic information products

This form has been prepared in accordance with SJ/T11364.

• O: It means that the content of the toxic and harmful substances in all homogeneous materials of the part is below the limit requirements specified in the GB/T26572 standard.
• X: It means that the content of toxic and harmful substances in the auxiliary part exceeds the limit requirements specified in the GB/T26572 standard at least in a homogeneous material of the part. The product complies with the EU RoHS2.0, CE certification, the United States FCC certification It is hereby declared that the product’s model name of Shenzhen Runyunteng Technology Co., Ltd. is: 007

This equipment must not be disposed of with common waste and must be recycled. This symbol indicates that this product must not be disposed of as household waste, but must be handed over to the corresponding waste recycling station for electronic and electrical equipment recycling.

• FCC ID: 2BAY8-RYT 007
• Manufacturer: Shenzhen Runyunteng Technology Co., Ltd
• Address: Shenzhen Longhua Street Fuquan Building A712 Designed by Runyunteng

Made in China The picture is for reference only, please refer to the actual product.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>