SOUND BASS Smart Soundbar 300 TV Speaker and Sound Touch Instruction Manual
- June 14, 2024
- Sound BASS
Table of Contents
SOUND BASS Smart Soundbar 300 TV Speaker and Sound Touch Instruction Manual
Important Safety Instructions – READ BEFORE INSTALLING
BEFORE YOU BEGIN
Please verify the following items:
Ensure your TV and any other accessories you plan to use DO NOT EXCEED the specified weight limit of your TV wall mount. You read and understand these directions.
You refer to the documentation that came with your Bose® Soundbar and TV wall mount for additional guidance.
You have the tools needed for installation.
WARNING
This Bose® Soundbar TV Attachment is only designed to be used with TV wall mounts that meet third party safety certifications.
This soundbar mount is designed to be installed and utilized only as specified in this manual,
The manufacturer is not responsible for improper assembly, use, or handling of this product,
Your wall must be capable of supporting FIVE TIMES the weight of your TV, TV mount, and soundbar combined.
Failure to follow these instructions could result in an unstable situation that may result in property damage or personal injury
SAFETY WARNING-WEIGHT RESTRICTIONS
Weight Limit for Your TV Mount
CAUTION: Avoid potential personal injuries and property damage!
The weight of your TV + TV Mounting Bracket + Bose® Soundbar, and any accessories, MUST BE LOWER than the maximum weight rating of your TV mount. See your TV mount’s manual for maximum weight allowed.
Mount Weight 3.08 lbs (1.4 kg)
Soundbar Weight
TV Speaker = 4.3 lb / 2 kg
Soundbar 300 = 7 lb / 3.2 kg
Soundbar 500 = 7 lb / 3.18 kg
Soundbar 700 = 10.5 lb / 4.8 kg
Soundbar 900 = 12.7 lb / 5.75 kg
SoundTouch 300 = 15.5 lb / 7.05 kg
You TV Weight
REQUIRED FOR FITTING
Philips Screwdriver
3rd Party Certified TV Wall Mount*
Bose Soundbar
*Your TV wall mount may vary from the illustrations throughout this manual – NOTE that the procedure to install the Bose® Soundbar is the same.
PARTS SUPPLIED
Preparing Your TV Mount
Preparing Your TV Mount – VESA Pattern Size
Adjust both arms of the Bose Universal TV Attachment so the speaker is in the desired position.
NOTE : You may need to reposition the hole locations on the arms to adjust the soundbar to your desired position,
IMPORTANT : The final position of your soundbar must be within 2 inches (50mm) of the bottom of the TV.
NOTE: When positioning your soundbar, make sure you will be able to access the control buttons on the top surface [If applicable).
Adjust the Soundbass Bose® Universal TV mounting attachment to match the
VESA hole pattern of your TV.
Preparing Your TV Mount – VESA Pattern Size
Preparing Your TV Mount – VESA Pattern Size
If your TV is already mounted:
IMPORTANT: Follow your TV mount’s manual for instruction: on how to safely remove your TV and TV bracket.
Remove any cables attached to your TV.
Remove your TV / bracket assembly from your wall plate, arm assembly, or pillar.
HEAVY: You WILL need assistance with this step!
Remove the TV bracket(s) and hardware from your TV.
Install Bose® TV Attachment with Your TV Mount
Determine which screw diameter fits your monitor or
TV M4, M5, M6, or M8.
For TVs with a flat unobstructed back follow step 3.1
For TVs with a rounded / irregular obstructed back, follow step 3.2
If you need extra space to accommodate cables, recesses or protrusions, follow 3.2
For 100/200mm VESA pattern follow step 3.3
Standard configurations shown. For special applications, contact Customer
Service.
CAUTION
Ensure adequate thread engagement with your screw/washer/spacer combination
AND all brackets.
* TOO SHORT
will not hold the TV.
* TOO LONG
will damage the TV.
IMPORTANT: To offset the shift in height of your TV bracket, due to the
soundbar brackets 02, you MUST use washers, 21 in the top hole locations.
Fixing Bose® Universal Attachment to TV
Prepare the Soundbass® TV Attachement 2 x Mount Spacer
Loosely fix the ARMS 02 of the Bose® TV Attatchment together with the bracket
01
Attaching to the TV
21 Install your TV mount’s interface bracket with the Bose® TV Attachment
assembly using mount spacers 21 on the TV’s top two holes (If required).
NOTE: Soundbar mount ARMS 02 and mount spacers 21 fit BETWEEN your TV and TV mounting bracket.
NOTE: Extra screws and washers are provided, If required for a better fit I.e. your TV screws are too short or too long.
WARNING: You must use the larger washers 08 & 09 (unless they do not fit with your TV mount)
IMPORTANT!
Do not over-tighten the screws this will deform the washers.
Fixing Bose® Universal Attachment to TV
Prepare the Soundbass® TV Attachement
Loosely fix the ARMS 02 of the Bose® TV Attachment together with the bracket
01
Attaching to the TV
Install your TV mount’s interface bracket with the Bose® TV Attachment
assembly using mount spacers 21 on the TV’s top two holes and TV spacers 20
(If required).
NOTE: Soundbar mount ARMS 02 and mount spacers 21 and TV spacers 20 fit BETWEEN your TV and TV mounting bracket.
NOTE: Extra screws and washers are provided, If required for a better fit I.e. your TV screw are too short or too long
WARNING You must use the larger washers 08 & 09 (unless they do not fit with your TV mount)
IMPORTANT!
Do not over-tighten the screws this will deform the washers.
Fixing Bose® Universal Attachment to TV
Prepare the Soundbass TV Attachement 2x Mount
Loosely fix the ARMS 02 of the Bose® TV Attachment together with the bracket
01 21
Attaching to the TV
Install your TV mount’s interface bracket with the Bose® TV Attachment
assembly using mount spacers 21 on the TV’s top two holes (If required).
NOTE: Soundbar mount ARMS 02 spacers 21 fit BETWEEN your TV and TV mounting bracket.
NOTE: Extra screws and washers are provided, If required for a better fit l.e. your TV screws are too short or too long.
WARNING: You must use the larger washers 08 & 09 (unless they do not fit with your TV mount)
IMPORTANT!
Do not over-tighten the screws this will deform the washers.
Re-Hanging Your TV
Once your Bose® TV Attachment is in the desired position tighten ALL the screws to fix the mount in position
Follow your TV wall mount installation manual to hang your TV assembly, ensuring that the mount is spaced correctly and level
HEAVY: You will need assistance with this step!
Preparing The Speaker
Remove the rubber covers or grommets on the base of the speaker to reveal the
screw fixings hole
Fitting The Speaker
Adjust fixings 03 left and right to fit your speaker model. The screw holes are slotted to allow movement backwards and forwards 24
Connect the cables to the speaker.
Use the cable tie provided to secure the cables
SOUNDBASS (UK) CO.,
LIMITED RM1104, CRAWFORD HOUSE 70 QUEENS ROAD
CENTRAL
HONG KONG
support@soundbass.co.uk
www.soundbass.co.uk/fb-support
Soundbase (UK) Co., Limited and its affiliated corporations and subsidiaries (collectively known as “Soundbass”), Intend to make this manual accurate and complete. However, Soundbass makes no daim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Soundbass makes no representation of warranty, expressed or implied, regarding the information contained herein. Soundbass assumes no responsibility for accuracy, completeness or sufficiency if the information contained in this document.
©2021 Soundbase (UK) Co.,
Limited. All Rights Reserved. SOUNDBASS is a Soundbase (UK) Co., Limited brand
and a registered trademark owned by Soundbase (UK) Co., Limited. Soundbase
(UK) Co., Limited, RM 1104 Crawford House, 70 Queens Road, Central Hong Kong
Bose TV Speaker Sound Touch” Smart Soundbar 300 Soundbar 500 Soundbar 700 Soundbar 900 Soundtouch300 are trademarks of Bose Corporation, Soundbass is NOT affiliated with Bose Corporation
Made In China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>