APRIA Luna II Sleep Therapy User Guide

APRIA Luna II Sleep Therapy

Product Information

Formerly known as 3B Medical, Inc.

Quick Start Guide

Reference your Apria Sleep Therapy User Guide or visit Apria.com/Sleep for more details.

Product Usage Instructions

Step 1: Attach the Power Cord

Attach the power cord to the PAP machine and connect the device to a power outlet.

Step 2: Remove the Water Chamber

Remove the water chamber from the PAP machine.

Step 3: Fill the Water Chamber

Open the water chamber lid and fill it with water.

Step 4: Reinsert the Water Chamber

Reinsert the water chamber into the PAP machine.

Step 5: Connect the Tubing

Connect the tubing to the PAP machine.

Step 6: Insert the SD Card (if applicable)

If you received an SD card, insert it into the SD card slot.
Note: Newer devices may not require an SD card.

Step 7: Power On the PAP Machine

Turn the knob to power on the PAP machine and begin therapy.

Step 8: Fit Your Mask

• If your doctor prescribed a specific mask and size, follow the fitting instructions provided by the manufacturer. If you received a mask with multiple cushions, follow the instructions below:
• There is a mask cushion currently attached to the frame of your mask. This size fits most patients.
• If your mask is leaking or feels uncomfortable, try removing the existing cushion and replacing it with a different size cushion.
• If you are between sizes, it is best to use the larger cushion.
• Use the Fitting Template (for nasal mask and full face mask) and/or the manufacturer’s instructions included with your mask for help.

Step 9: Put on Your Mask

Attach the tubing to your mask.

Step 10: Check for Air Leaks

Check for air leaks. Small leaks are acceptable. If large leaks occur, consult your Apria Sleep Therapy User Guide.

Step 11: Lie Down and Take Deep Breaths

Lie down and take four deep breaths. The machine should start automatically. If it doesn’t, press the Start Therapy/Standby button. Relax and begin to take slow breaths through your nose.

Step 12: Your Setup is Complete

You are now ready to begin your PAP therapy!

Step 13: Cleaning and Maintenance

Make sure to follow the cleaning and maintenance instructions provided and review the recommended supply replacement schedule.

For Assistance

If you have any questions or need help setting up your device and getting started, please call us at 877.265.2426 or visit Apria.com/Sleep.

• Support hours:
• Monday – Friday: 8 a.m. – 10 p.m. ET
• Saturday: 11 a.m. – 7:30 p.m. ET
• SLP-4389 Rev. 07/23_v8

Get Started

Reference your Apria Sleep Therapy User Guide or go to Apria.com/Sleep for more details.

INSTALLATION INSTRUCTION

1. Attach the power cord to the PAP machine and connect device to a power outlet.

2. Remove the water chamber from the PAP machine.

3. Open the water chamber lid and fill with water.

4. Reinsert the water chamber into the PAP machine.

5. Connect the tubing to the PAP machine

6. If you received an SD card, insert it into the SD card slot.
   Note: Newer devices do not need an SD card.

7. Turn knob to power on PAP machine and begin therapy

8. Fit your mask. If your doctor prescribed a specific mask and size, follow the fitting instructions provided by the manufacturer. If you received a mask with multiple cushions, follow these instructions:

   • There is a mask cushion currently attached to the frame of your mask. This size fits most patients. Once you begin therapy, if your mask is leaking or feels uncomfortable, try removing the existing cushion and replacing it with a different size cushion. If you are between sizes, it is best to use the larger cushion. Use the Fitting Template (for nasal mask and full face mask) and/or the manufacturer’s instructions included with your mask for help.

9. Put on your mask.

10. Attach the tubing to the PAP machine

11. Attach the tubing to your mask.

    • (If using prescribed oxygen, consult page 11 in your Apria Sleep Therapy User Guide.)

12. Lie down and take four deep breaths.

    • The machine should start automatically. If you do not hear the machine start, press the Start
    • Therapy/Standby button. Relax and begin to take slow breaths through your nose.

13. Check for air leaks.

    • Small leaks are acceptable. If large leaks occur, consult your Apria Sleep Therapy User Guide.

14. Your setup is complete. You are now ready to begin your PAP therapy!

15. Make sure to follow the cleaning and maintenance instructions provided and review the recommended supply replacement schedule.

• If you have any questions or need help setting up your device and getting started, please call us or visit Apria.com/Sleep.
• Monday – Friday: 8 a.m. – 10 p.m. ET
• Saturday: 11 a.m. – 7:30 p.m. ET
• ©2023 Apria Healthcare Group LLC SLP-4389 Rev. 07/23_v8

References

• Apria Sleep Care

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>