home8 ADS1302 Medication Adherence Sensor User Manual

June 12, 2024
Home8

**home8 ADS1302 Medication Adherence Sensor User Manual

**

Introduction

The Medication Adherence Sensor is a professionally calibrated sensitivity sensor. You can place this sensor on a portable pill box to track how often it is used. Share activity logs with medical professionals or caregivers.

Key features and specifications of the sensor.
Works with all Home8 systems
Self-Configuring and easy installation
Device is not controlled by the Arm/Disarm Remote Control
Internal Antenna
Low battery status alarm
LED indicator
4-axis acceleration detection/monitoring

System Requirement
This section explains the system requirements when using the sensor.

Network| Router with

  • 10/100Mbps RJ45 LAN port
  • DHCP service

---|---
Mobile Device| An Apple iPhone, iPad, or Android mobile device with:

  • iOS (version 8.1 above)

  • Android (version 4.1 above)

  • See Appendix – Glossary of Terms.

Hardware Overview

This section provides an overview of the Medication Adherence Sensor.

  • Trigger LED

  • QR code

  • Battery

Medication Adherence Sensor Setup

Power on the sensor
Before using the sensor, please remove the plastic pull tab from the sensor to power it up.

Adding the Sensor to the System
Before you begin using the sensor, it will need to be added to the system first. For details, see the subsections below. To activate the sensor, complete the following steps.

Note:
Make sure the Security Shuttle is powered on and connected to your router

  1. Tap the menu icon to show the sidebar menu.
    Sidebar menu

  2. Tap “Device Management”. If you have more than one security shuttle, you may need to swipe left more than once to find the one you want the sensor to connect to. After selecting the security shuttle, tap the plus icon “+” located to the right of “Sensor List”.
    Device Management

  3. Select “Sensor”.
    Select “Sensor”

  4. Follow the on-screen instructions. When finished, press “Next”.
    Press “Next”

  5. After scanning the QR code located on the bottom of the camera, the “sensor adding” process will begin.

After Scanning
Searching

  1. When the activation is completed, the sensor will be added to the device management page. In the illustration shown below, the name of the Security Shuttle is “Location 1” and the name of the sensor is “Medication Adherence 00158xxxx”.
    Activation Complete

Positioning the sensor
After the “sensor adding” process has been completed, you can place the device on portable pill box.

Remove Sensor
To remove the sensor from the current Security Shuttle, tap “Remove Sensor”.
Remove Sensor

Starting to Use the Medication Adherence Sensor

Medication Adherence
Regardless of the arming status, the Medication Adherence sensor will log the activities of the attached portable pill box and present the activities in two ways.

  1. Tap the Medication icon to enter the Medication Adherence page.
    Medication Adherence

  2. Tap Medication Adherence Sensor for setup schedule.
    Sensor For Setup

  3. Click on the Add icon for adding more Daily Dispense Times and turn the “Enable Schedule” on. It allows you to add up to 6 dispense times per day.
    Enable Schedule

  4. Click on check icon to finish the schedule setup.
    Enable Schedule

  5. When the schedule time is up, it will remind you to take pills and record it.
    Time Up

  6. At the log page, you can have an activity record of up to 7 days and click on “See All Data” for more details.
    Location

Appendix – Glossary of Terms

Arm: The cameras and other security related sensors in the system are actively monitoring the surroundings. Any suspicious activity that has been detected by the camera or sensor will prompt the app to immediately send a notification. A recording will also be performed by the camera(s) that witnessed the event.
Disarm: The cameras and other security related sensors in the system are no longer actively monitoring the surroundings. The system will not react to any suspicious activity detected by these devices. No notification will be sent.
Note: If the continuous recording function is turned on, video recording will always work regardless if the system is armed or disarmed. For more details regarding the continuous recording function, see Section 4.8 Turn On/Off Continuous Recording.
Event: An event is created when any camera or sensor detects an activity, or is manually triggered by the user.
Security Shuttle: Functions as a secure and intelligent hub to manage the devices and communicate with the cloud server. Currently, there are three types – OPU1120, OPU2120, and OPU3120.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals