Aluratek ADB1B Bluetooth Audio Receiver & Transmitter User Manual
- June 12, 2024
- Aluratek
Table of Contents
Aluratek ADB1B Bluetooth Audio Receiver & Transmitter
INTRODUCTION
The ‘consumer’ in ‘consumer electronics’ is what we at Aluratek are most concerned with. We make available the most cutting-edge technology to make your life easier while also ensuring that said technology is intuitive to install and operate. We are most well-known for our digital photo frames, but we also provide eco4life SmartHome accessories and Bluetooth solutions that not only improve the home itself but also the lives of the people who reside in that home. Products manufactured by Aluratek can be purchased from reputable dealers and resellers located all across the United States and Canada.
DESCRIPTION
If you want to add Bluetooth streaming functionality to your home entertainment system or stream music to your Bluetooth headphones and speakers, the Aluratek Universal Bluetooth Optical Audio Receiver and Transmitter with Power adaptor are the one and only adaptors you will need. You will be able to enjoy wireless audio receiving and transmitting up to 33 feet for up to 15 hours on a full charge with the dual receiver transmitter because it comes equipped with an integrated rechargeable battery. In transmitter mode, the ADB1B may concurrently stream audio to two sets of headphones, and it can remember up to four different Bluetooth devices.
-
Rx, short for receiving:
You can wirelessly stream music from your computer, smartphone, or tablet to any audio device that has an AUX IN (3.5 mm) connector, such as stereos, car stereos, and speaker docks, by using the receiving function on your audio device. You can also connect to home stereo receivers through the RCA IN ports by using the RCA-Y cable that is supplied, or you can connect to the SPDIF IN port by using the digital optical audio cable that is included. Additionally, you can connect a pair of wired headphones directly to the ADB1B. You don’t have to get rid of that old stereo or wired headphones just yet. Keep them going with the help of Bluetooth connectivity, and revel in the delights of music and audio without the need for cables. -
Tx (Transmitting):
Utilize the transmitting function to connect any audio output device with an AUX OUT (3.5mm) connector, such as a computer, TV, walkman, CD player, or MP3 player, to a Bluetooth-enabled device, such as Bluetooth headphones, Bluetooth earbuds, or Bluetooth speakers. This can be done by connecting the source device to a Bluetooth-enabled device. You can also connect to home stereo receivers through the RCA OUT ports by using the RCA-Y cable that is supplied, or you can connect through the SPDIF OUT port by using the digital optical audio cable that is included. The ADB1B adapter makes it possible to concurrently pair two sets of Bluetooth headphones, enabling users to listen to audio from two different sources without interrupting their listening experience.
PRODUCT OVERVIEW
SPECIFICATIONS
- Brand: Aluratek
- Connectivity Technology: Wireless, Bluetooth
- Controller Type: Android
- Special Feature: Rechargeable
- Compatible Devices: Television
- Connector Type: RCA, Optical
- Audio Output: Mode Stereo
- Color: Black
- Item Dimensions LxWxH: 2.25 x 0.5 x 0.75 inches
- Item Weight: 0.25 Pounds
- Item model number: ADB1B
WHAT’S IN THE BOX
- Bluetooth Receiver/Transmitter
- Optical Cable
- RCA Cable
- USB Charging Cable
- 3.5MM Cable
- User Manual
PRODUCT USAGE
-
Audio streaming over wireless networks:
Because it is a Bluetooth audio receiver, the ADB1B enables you to stream audio wirelessly from your smartphone, tablet, or any other Bluetooth-enabled device to your non-Bluetooth audio devices, such as classic stereo systems or speakers. You may do this by connecting your smartphone, tablet, or other Bluetooth-enabled device to the ADB1B. -
Transmission of Sound via Bluetooth:
The ADB1B is a Bluetooth audio transmitter that enables you to transfer audio from non-Bluetooth devices, such as TVs, MP3 players, or older audio equipment, to Bluetooth headphones or speakers. You may do this by connecting the ADB1B to the non-Bluetooth device and then using it as a Bluetooth audio receiver. -
Upgrades for Electronics That Do Not Have Bluetooth:
Your audio devices that do not already support Bluetooth communication can be upgraded to do so with the help of the ADB1B. This is especially helpful in the event that your preferred music system does not have the potential to connect via Bluetooth. -
Making Provisions for Wireless Audio Zones:
Whether you’re at home or at the workplace, the ADB1B makes it easy to set up a wireless audio zone. Audio can be transmitted from one source to several Bluetooth receivers (speakers or headphones) simultaneously, allowing you to listen to the same music in each of your rooms without having to switch devices. -
How to Connect Bluetooth Headphones to Devices That Do Not Have Bluetooth:
You can use the ADB1B to pair your Bluetooth headphones so that you can listen to music wirelessly even if the device you’re using does not support Bluetooth. One example of this would be an in-flight entertainment system. -
Audio for Bluetooth Gaming Devices:
You can experience wireless game audio on your Bluetooth headphones or speakers by connecting the ADB1B to your gaming console or personal computer and using the USB cable included. -
Audio Streaming using Bluetooth in the Vehicle:
You can equip the radio system in your vehicle with the ability to play audio via Bluetooth by utilizing the ADB1B. Simply connect your smartphone to the ADB1B, and it will send the audio signal wirelessly to the speakers in your vehicle. -
Functionality in Both Modes:
The ADB1B supports dual mode, which means that you can use it as either a transmitter or a receiver, depending on the requirements of your particular audio setup. -
Calling with No Hands Necessary:
You will be able to use the ADB1B as a Bluetooth hands-free kit for making and receiving calls while you are driving your vehicle if you connect it to the audio system in your vehicle. -
Outdoor Audio System:
Connecting the ADB1B to a speaker that is powered by a battery allows you to set up a portable music system. The fact that you can wirelessly stream music from your phone to the speaker makes it an excellent choice for outdoor get- togethers and picnics. -
Audio Collaboration:
Connecting two Bluetooth headphones to the ADB1B at the same time allows you and a friend to listen to the same audio source, allowing you to share the music you’re listening to with one another.
FEATURES
-
In addition to 3.5mm, optical Flexibility:3.5mm
Depending on whether the adapter is being used for receiving or sending signals, you may connect it to any audio device that has an AUX IN or OUT connection by employing the 3.5mm cable that is supplied in the package.
-
Digital Optical
If you want your audio system to have multi-channeled high-definition optical audio, you may connect it to your TV or home stereo receiver using the digital optical audio cable that is provided in the package (SPDIF IN / OUT). -
Dual Modes, often known as RX and TX
To enable either Bluetooth Receiving or Bluetooth Sending on the unit, simply flick the switch located on the back of the device. The rechargeable battery that is incorporated inside the ABC02F allows you to enjoy wireless audio receiving and transmission up to 33 feet for up to 15 hours on a full charge. It will even allow you to transmit or receive while it is charging, so you never have to miss out on any of the fun. -
Dual Streaming Capabilities: Supported
It is possible to pair two Bluetooth headphones together so that you can stream to two different devices at the same time for up to 15 hours on a single charge using the lithium-ion battery that is integrated right into the headphones. (Only in the transmitting mode) -
Absolute Perfection in Synchronization
The Bluetooth Universal Audio Receiver and Transmitter have low latency Bluetooth (v4.0) technology, which eliminates audio delay so that you may experience rich sound clarity in perfect sync with whatever television, movie, or gaming experience you are participating in. -
Dual Modes
Capable of Both Receiving and Sending Messages To enable either Bluetooth Receiving or Bluetooth Sending on the unit, simply flick the switch located on the back of the device. -
Make Your TV Compatible with Bluetooth
Connect the transmitter directly to your TV or to your home stereo receiver using the RCA-Y cable that is supplied (RCA OUT ports). Alternatively, connect the transmitter to your home stereo receiver using the digital optical audio cable that is included (SPDIF OUT port). This will allow you to transfer audio from your preferred television show or sporting event to your Bluetooth headphones. -
Stereos and Speaker Docks Can Now Be Linked to Bluetooth
You can listen to internet radio on any audio device that has an AUX IN (3.5mm) connector, such as boomboxes, vehicle stereos, and home stereo receivers, by streaming it wirelessly from your computer or mobile device to those devices. -
Dual Streaming Capabilities Available
You can stream to both devices concurrently for up to 15 hours on a full charge using the built-in lithium-ion battery if you pair two Bluetooth headphones at the same time. This is possible because you can pair two Bluetooth headphones at the same time. (Only in the transmitting mode) -
Absolute Perfection in Synchronization
Feel minimal lag in your responses. Bluetooth v4.0 technology reduces audio latency, allowing users to enjoy rich sound clarity that is in perfect rhythm with whatever video, movie, or gaming experience they are participating in. -
Stream Audio for Many Hours at a Time
Includes a rechargeable battery that is built in, which means that you can enjoy wireless streaming up to 33 feet (10 meters) for up to 10 hours on a full charge, and it will even let you to send or receive while it is charging. -
If you want to add Bluetooth streaming functionality to your home entertainment system or stream music to your Bluetooth headphones and speakers, the Universal Bluetooth Optical Audio Receiver and Transmitter from Aluratek is the one and only adaptor you will need.
FREQUENTLY ASKED QUESTIONS
What is the Aluratek ADB1B Bluetooth Audio Receiver & Transmitter?
The Aluratek ADB1B is a compact device that serves as both a Bluetooth audio receiver and transmitter, allowing wireless audio streaming between Bluetooth- enabled devices and non-Bluetooth audio equipment.
How do I use the Aluratek ADB1B as a Bluetooth receiver?
To use it as a receiver, connect the ADB1B to your non-Bluetooth audio system using the provided audio cables. Pair your Bluetooth-enabled device (e.g., smartphone) with the ADB1B, and it will receive and play audio wirelessly.
Can the ADB1B receive audio from multiple Bluetooth devices simultaneously?
No, the ADB1B can connect to one Bluetooth device at a time when operating as a receiver.
How do I use the Aluratek ADB1B as a Bluetooth transmitter?
To use it as a transmitter, connect the ADB1B to a non-Bluetooth audio source, such as a TV or MP3 player, using the provided audio cables. Pair it with your Bluetooth headphones or speakers, and it will transmit audio wirelessly.
What Bluetooth version does the ADB1B support?
The ADB1B supports Bluetooth version 4.0.
Does the ADB1B support aptX or aptX Low Latency for better audio quality?
No, the ADB1B does not support aptX or aptX Low Latency codecs.
How far is the Bluetooth range of the ADB1B?
The Bluetooth range is typically up to 33 feet (10 meters) in an open space without obstructions.
Can I use the ADB1B to answer phone calls when connected to a smartphone?
Yes, if the ADB1B is paired with a smartphone, you can use it as a hands-free kit to answer and make calls through the connected audio system.
Does the ADB1B have a built-in battery, or does it need to be connected to a power source at all times?
The ADB1B needs to be connected to a power source (via USB) at all times when in use. It does not have a built-in battery.
Can I use the ADB1B to transmit audio from my computer to Bluetooth headphones?
Yes, you can connect the ADB1B to your computer's audio output and use it to transmit audio to your Bluetooth headphones or speakers.
Does the ADB1B come with all the necessary cables for both receiving and transmitting audio?
Yes, the ADB1B usually comes with the required audio cables (3.5mm and RCA) for both receiving and transmitting audio.
Can I use the ADB1B with my car's audio system to enable Bluetooth audio streaming?
Yes, you can use the ADB1B to add Bluetooth audio capability to your car's stereo system by connecting it to the car's audio input.
Is the ADB1B compatible with all types of audio equipment?
The ADB1B is compatible with most audio devices that have standard 3.5mm or RCA audio inputs/outputs.
Can the ADB1B transmit audio to multiple Bluetooth headphones or speakers at the same time?
No, the ADB1B can connect to one Bluetooth audio receiver (headphones or speakers) at a time when operating as a transmitter.
How do I switch between receiver and transmitter modes on the ADB1B?
The ADB1B usually has a physical switch or button to toggle between receiver and transmitter modes.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>