ELECOM M-XT3DR Wireless Trackball Mouse User Manual

June 12, 2024
ELECOM

Names and functions of each part

Mouse Assistant

ELECOM-M-XT3DR-Wireless-Trackball-Mouse-2

Win
https://www.elecom.co.jp/r/132.html
Mac
https://www.elecom.co.jp/r/133.html
Download “ELECOM Mouse Assistant™ from the ELECOM website to use its button assignment and high-speed scrolling functions.

Trackball mouse

ELECOM-M-XT3DR-Wireless-Trackball-Mouse-1

  1. Left button

  2. Right button

  3. Tilt wheel/pointer speed indicator light

  4. “Back” button You can perform the “Back” operation in a web browser.

  5. “Forward” button You can perform the “Forward” operation in a web browser.

  6. Function buttons No function is assigned at the time of purchase. Download “ELECOM Mouse Assistant” from the ELECOM website to use its button assignment function. 7

  7. Trackball

  8. Pointer speed selector Sliding the selector left and right switches the resolution (pointer speed) between LOW and HIGH. The current resolution will be indicated by the blinking pointer speed indicator light. Blinks once: 750 dpi Blinks twice: 1500 dpi

  9. Operation mode swatch

  10. Power off

  11. L (Low Power Mode)

  12. H (High Speed Mode)

  13. Ball removal hole Remove the ball for cleaning

  14. Optical sensor (under the ball)

  15. Receiver unit storage

  16. Battery cover

  17. Battery compartment

  18. USB connector (male)

Installing a battery

  1. Remove the battery cover.
  2. Insert a battery. Insert the battery making sure the positive and negative polarity is correct.
  3. Attach the battery cover back in its original position.

Turning on the trackball

Slide the operation mode selection switch to H (High Speed Mode) or L (Low Power Mode).
When using the High Speed Mode, the tracking performance of faster ball movements becomes better but the battery life gets shorter.
The light behind the tilt wheel illuminates in red for a few seconds.
When the remaining battery capacity is low, it blinks in red for a few seconds.

Connecting to a PC

  1. Start the PC.
  2. Insert the receiver unit into a USB port on the PC.
  3. Be sure to sufficiently check the connector orientation and the insertion location.
  4. If you feel a strong resistance when inserting the USB connector, check that the shape and orientation of the connector is correct. Using excessive force may damage the connector and cause injury.
  5. Do not directly touch the terminal area of the USB connector.
  6. The driver will be automatically installed, and you will then be able to use the trackball.

Cleaning the trackball

  1. Push the ball out from behind with your finger or a pen.
  2. Remove dust from the areas where the three red support balls contact the trackball using a cotton swab. Take care not to damage the optical sensor when cleaning the area.

Specifications

ELECOM-M-XT3DR-Wireless-Trackball-Mouse-9

  • When the computer is used for 8 hours a day, with 5% of that time spent operating the mouse using alkaline batteries.

Safety Precautions

  • Prohibited action
  • Mandatory action
  • Situation that needs attention ‘

WARNING

  • If a foreign object (water, metal chip, etc.) enters the product, immediately stop using the product, remove the receiver unit from the PC, and remove the battery from the trackball. Continuing to use the product under these conditions may cause a fire or electric shock.
  • If the product is behaving abnormally, such as by generating heat, smoke, or a strange smell, immediately stop using the product, shut down the PC, and then sufficiently check whether the product is generating heat while being careful to avoid being burned. Then, remove the receiver unit from the PC and remove the battery from the trackball. After that, contact the retailer from whom you purchased the product. Continuing to use the product under these conditions may cause a fire or electric shock.
  • Do not drop the product or otherwise subject it to impacts. If this product is damaged, immediately stop using it, remove the receiver unit from the PC, and remove the battery from the trackball. After that, contact the retailer from whom you purchased the product. Continuing to use the product while it is damaged may cause a fire or electric shock.
  • Do not attempt to disassemble, modify or repair this product by yourself, as this may cause a fire, electric shock or product damage.
  • Do not put this production fire, as the product may burst, resulting in a serious fire or injury.
  • Do not insert or remove the receiver unit with wet hands. Also, do not make alterations to or forcefully bend the receiver unit. Doing so may cause a fire or electric shock. The receiver unit presents a swallowing hazard for children, so be sure to store the receiver unit in a place out of the reach of children.

Caution
Do not place this product in any of the following environments:

  •  In a car exposed to sunlight, a place exposed to direct sunlight, or a place that becomes hot (around a heater, etc.)
  • In a moist place or a place where condensation may occur
  • In an uneven place or a place exposed to vibration
  • In a place where a magnetic field is generated (near a magnet, etc.)
  • In a dusty place
  • This product does not have a waterproof structure. Use and store this product in a place where the product body will not be splashed with water or other liquid. Rain, water mist, juice, coffee, steam or sweat may also cause product damage.
  • Only use this trackball with PCs and video game systems.
  • Do not use this product with any device that may significantly affect other equipment, in case the product malfunctions.
  • If this trackball is not going to be used for one month or longer, remove the receiver unit from the PC. ) to us a this product wad the battery, be sure to dispose of it in accordance with the local ordinances and laws of your area.

Batteries

  • Use AA alkaline batteries, AA manganese batteries, or rechargeable A nickel hydride batteries with this product.
  • If this product is not going to be used for a long period of time, remove the battery to avoid battery leakage and failure..

Cleaning the Trackball

  • If the product body becomes dirty, wipe it with a soft, dry cloth.
    Use of a volatile liquid (paint thinner, benzene, alcohol, etc.) may affect the material duality and color of the product.

Cautions for Wireless Equipment

This product is wireless equipment using the entire range of the 2.4 GHz band and it is possible to avoid the band of mobile object identification systems. GFSK is used for the radio wave method. The interference distance is 10 m. The 2.4 GHz band is also used by medical equipment, Bluetooth, and wireless LAN equipment conforming to the IEEE802.11b/11g /11n standard.

  • Before using this product, check that there are no other “radio stations”* operating nearby.

  • If electromagnetic interference occurs between this product and other “radio stations”, move this product to another location or stop using this product.

  • Other “radio stations” refer to industrial. scientific and medical devices using the 2.4 GHz band, as this product does, other radio stations of this type, licensed radio station premises for a mobile object identification system that is used in factory production lines, certain non-licensed low power radio stations and amateur radio stations.

WARNING

  • Do not use this product with a device that may have a serious function or influence. There are rare cases where an external radio wave at the same frequency or the radio wave emitted from a mobile phone causes this product to malfunction, slow down, or fail to operate.
  • Do not use this product in a hospital or other locations where the use of radio waves is prohibited. The radio waves of this product may affect electronic and medical devices (e.g. pacemakers).
  • The use of a wireless trackball in an aircraft is prohibited by aviation law because doing so may interfere with flight safety. Turn off the power of the trackball body before boarding an aircraft and do not use it in the aircraft. * ELECOM is not liable for any accident or any indirect or consequential damage incurred due to the failure of this product.

Limitation of Liability

  • In no event will ELECOM Co., Ltd be liable for any lost profits or special, consequential, indirect, punitive damages arising out of the use of this product.
  • ELECOM Co., Ltd will have no liability for any loss of data, damages, or any other problems that may occur to any devices connected to this product.

Compliance status

www.elecom.co.jp/global/certification/

  • FCC ID: YWO-M-XT3DR
  • FCC ID: YWO-ELECOM01
  • FCC ID: YWO-XT3DR
  • FCC ID: YWO-ELECOM03

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE; This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no grantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

NOTICE: The manufacture is not responsible for any radio or TV interference caused by unauthorized modifiation to this equipment. Such modifications could void the user’s authority to operate the equipment. In order to make improvements to this product, the design and specifications are subject to change without prior notice

Responsible party:
ELECOM USA, Inc.
18575 Jamboree Road Suite 600,
Irvine CA 92612 USA elecomusa.com

Please see the current state of RoHS compliant:
RoHS: www.elecom.co.jp/global/certification/

CE Authorised representative : Amazon Services Europe S.à r.l 38 avenue John F. Kennedy, L-1855 Luxembourg

WEEE Disposal and Recycling Information
This symbol means that waste of electrical and electronic equipment (WEEE should not be disposed as general household waste. WEEE should be treated separately to prevent possible harm to the environment or human health. Consult your retailer or local municipal office for collection, return, recycle or reuse of WEEE.

Complies with IMDA standards DA106058

Trademark and name of the manufacturer:
ELECOM CO., LTD.
www.elecom.co.jp/global/
Fushimimachi 4-1-1, Chuo-ku, Osaka City

  • Unauthorized copying and/or reproducing of all or part of this manual is prohibited.
  • The specifications and appearance of this product may be changed without prior notice for product improvement purposes.
  • When exporting this product, check the export regulations for the country of origin.
  • When exoring tails produce. check the expire regulations tor the count or orcin.
  • Windows, Windows Vista and the Windows logo are trademarks of the Microsoft group of companies.
  • Mac OS and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.
  • Company names, product names, and other names in this manual are either trademarks or registered trademarks.

A customer who purchases outside Japan should contact the local retailer in the country of purchase for enquiries. In “ELECOM CO., LTD. (Japan)”, no customer support is available for enquiries about purchases or usage in/from any countries other than Japan. Also, no foreign language other than Japanese is available. Replacements will be made under stipulation of the Elecom warranty, but are not available from outside of Japan.

Wireless Trackball Mouse
Manual, Safety precautions, and Compliance with regulations
5th edition, June 27, 2023 ELECOM @2023
ELECOM Co., Ltd. All Rights Reserved.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ELECOM User Manuals

Related Manuals