Muxlab 500550 Dante 2-Channel USB Audio Encoder-Decoder User Manual
- June 12, 2024
- MuxLab
Table of Contents
Muxlab 500550 Dante 2-Channel USB Audio Encoder-Decoder
The Dante 2-Channel USB Audio Encoder/Decoder (Model: 500550) is a versatile device that can encode 2-channel USB audio to a Dante digital signal and decode a Dante digital signal to 2-channel USB audio. It is designed for easy plug & play use and can be powered either through PoE from any PoE network switch or via 5V from a USB device. The compact size of the product makes it portable and convenient to carry.
Features:
- Compliant with USB 2.0 Full Speed Operation
- Compliant with USB Audio Device Class Specification V1.0
- Analog sound card, supporting MIC input and SPK output
- Audio sampling rate supports 44.1kHz, 48kHz, and 96kHz (24bit)
- Dante solution supports AES67 RTP audio transmission
- Supports USB 5V power supply and PoE function (IEEE802.3af Class0)
Package Contents:
- One (1) Dante 2-Channel USB Audio Encoder/Decoder
- One (1) USB Cable (6FT USB A to USB B)
- One (1) User manual (available via download)
Specifications:
Technical| Video Network Bandwidth| Audio Formats| Transmission Distance|
Control Method
---|---|---|---|---
| 100M PCM 2.0| 44.1kHz/48kHz/96kHz up to 24bit| 100m (CAT6/6A)| Dante
Controller
Operation Controls and Functions:
| No | Name | Function Description |
|---|---|---|
| 1 | USB (From PC) | (1) 2-channel USB digital audio signal port: L/R stereo |
input
and L/R stereo output. (2) USB 5V power input port.
2| Dante PoE| Dante digital audio input and output port. Connect to the
Network Switch through RJ45 line, supporting PD power supply. The
green LINK LED is flashing when there is data transmission. The
yellow DATA LED is always on after normal connection.
For more information and updates, follow us on social media.
Safety Precautions
To ensure the best performance from the product, please read all instructions carefully before using the device. Save this manual for future reference.
- Follow basic safety precautions to reduce the risk of fire, electrical shock, and injury.
- Do not dismantle the housing or modify the module. It may result in electrical shock or burns.
- Do not open or remove the housing of the device as you may be exposed to dangerous voltage or other hazards.
- To prevent fire or shock hazard, do not expose the unit to rain, moisture and do not install this product near water. Keep the product away from liquids.
- Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on the housing, unplug the module immediately.
- Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
- Using supplies or parts not meeting the product specifications may cause damage, deterioration or malfunction.
- Refer all servicing to qualified service personnel.
- Install the device in a place with adequate ventilation to avoid damage caused by overheat.
- Unplug the power when left unused for a long period of time.
- Information on disposal of devices: do not burn or mix with general household waste, please treat them as normal electrical waste.
Copyright Notice
All contents in this manual are copyrighted, and cannot be cloned, copied, or
translated without the express permission of MuxLab Inc. Product
specifications and information in this document are for reference only, and
the content may be updated from time to time without prior notice.
Introduction
The Dante 2-Channel USB Audio Encoder/Decoder (Model: 500550) is designed to both encode 2ch USB audio to a Dante digital signal, and decode a Dante digital signal to 2ch USB audio. The unit is plug & play and can be powered using either PoE from any PoE network switch or via 5V from the USB device; In addition, the product is compact and easy to carry.
Features
- Compliant with USB 2.0 Full Speed Operation
- Compliant with USB Audio Device Class Specification V1.0
- Analog sound card, supporting MIC input and SPK output
- Audio sampling rate supports 44.1kHz, 48kHz and 96kHz (24bit) Dante solution supports AES67 RTP audio transmission
- Support USB 5V power supply and PoE function (IEEE802.3af Class0)
Package Contents
- One (1) Dante 2-Channel USB Audio Encoder/Decoder
- One (1) USB Cable (6FT USB A to USB B)
- One (1) User manual (available via download)
Notes： Confirm that the product and accessories are all included. If not, please contact the supplier from which you purchased the unit.
Specifications
Operation Controls and Functions
| No | Name Function Description |
|---|
1
| (1) 2-channel USB digital audio signal port: L/R stereo input and L/R stereo
USB (From PC) output.
(2) USB 5V power input port.
2
| Dante digital audio input and output port.
Connect to the Network Switch through RJ45 line, supporting PD power supply.
Dante PoE The green LINK LED is flashing when there is data transmission.
The yellow DATA LED is always on after normal connection.
Application Diagram
Dante 2-Channel USB Audio Encoder/Decoder 500550 2321 Cohen
St-Laurent , H4R 2N7
Québec, Canada
Tel : 514-905-0588
Fax: 514-905-0589
Toll free: 1-877-689-5228
info@muxlab.com
salesteam@muxlab.com
www.muxlab.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>