PEREL BG90007 Electronic Safe Box User Manual

PEREL BG90007 Electronic Safe Box

Product Information

1. The product model number is BG90007.
2. The product is a safe with lock bolts, batteries, and two keys included.
3. The safe can be secured to the floor, wall, or in a cupboard using the predrilled holes at the bottom and/or back.
4. The product has an emergency mode that allows opening the safe with the override key in case of lost codes or empty batteries.
5. The product requires alkaline batteries for operation.

Product Usage Instructions

Installing the Safe

To reduce the risk of theft, follow these steps to install the safe:

1. Use the predrilled holes at the bottom and/or back of the safe to define the position of the drill holes.
2. Fix the safe to the desired location using the supplied expansion bolts.
3. Ensure that the safe is installed in a horizontal position.

Preparations

First Use/Emergency Mode

Follow these steps for first use or when your codes have been lost or the battery level is too low:

1. Open the key compartment by removing the plastic cover between the knob and the numeral keypad.
2. Insert the override key and turn it to the left while turning the knob to the right at the same time.

Installing the Batteries

Follow these steps to install the batteries:

1. Open the battery compartment.
2. Install the batteries according to the indicated polarity. Use alkaline batteries for best results.
3. Close the battery compartment.

Note: Removing the batteries will delete the code. Re-enter your personal code after changing the batteries.

Operation

To open the safe, follow the manufacturer’s instructions provided with the product.

Introduction

To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules. If in doubt, contact your local waste disposal authorities.
Thank you for choosing Perel. Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, do not install or use it and contact your dealer.

Safety Instructions

Keep this device away from children and unauthorized users.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children shall be supervised to ensure that they do not play with the appliance.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

• Familiarise yourself with the functions of the device before actually using it.
• All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the device is not covered by the warranty.
• Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.
• Due to constant product improvements, the actual product appearance might differ from the shown images.
• Product images are for illustrative purposes only.
• Keep this manual for future reference.

Features

• 2 lock bolts
• batteries and two keys included

Installing the Safe

To reduce the risk of theft, the safe can be secured to the floor, wall or in a cupboard. Use the predrilled holes at the bottom and/or back to define the position of the drill holes. Fix the safe using the supplied expansion bolts. Install the safe in a horizontal position.

Preparations

First Use/Emergency Mode

WARNING!
The override key will open the safe without need of a code. It is therefore important never to store the override key inside or near the safe. The override key is also the only key with which you can open the safe in case of a lost code or empty batteries.
Use the emergency mode when opening the safe for the first time, when your codes have been lost or when the battery level is too low.

1. Open the key compartment: remove the plastic cover between the knob and the numeral keypad.
2. Insert the override key and turn to the left. At the same time, turn the knob to the right.

Installing the Batteries

WARNING!
Do not puncture batteries or throw them in fire as they may explode. Do not attempt to recharge non-rechargeable batteries (alkaline). Dispose of batteries in accordance with local regulations. Keep batteries away from children.

Change the batteries as soon as the red LED lights.

1. Open the battery compartment and install the batteries according to the indicated polarity. It is recommended to use alkaline batteries only.
2. Close the battery compartment.

Remark
Removing the batteries will delete the code. Re-enter your personal code. Refer to 5.3 Setting the Code.

Setting/Changing the Personal Code

1. With the safe door open, press the red button on the inside of the door.
2. Enter a personal code – this code must be 3 to 8 digits long. Confirm with [#]. The beep means that your code has been validated.

Operation

To open the safe:

1. Enter your personal code and confirm with [#].The safe box will beep and the green LED will light.
2. Turn the knob clockwise to open the door.

Remark:
You have 5 seconds to open the door after the beep. Failing to do so will automatically deactivate the entered code. Please repeat the steps above.

WARNING!
Three (3) erroneous code inputs will freeze the system for 20 seconds. Subsequent input of three erroneous code will freeze the system for 5 minutes.

Key Sound

Press [] + [633] to deactivate the key sound; press [] + [66] to activate the key sound.

Cleaning and Maintenance

Occasionally wipe with a damp cloth to keep it looking new. Do not use harsh chemicals, cleaning solvents or strong detergents.

Technical Specifications

• dimensions …………………………………………………………………………………. 350 x 250 x 250 mm
• internal dimensions ………………………………………………………………………. 346 x 190 x 246 mm body steel thickness
• body ……………………………………………………………………………………………………. 2 mm
• door …………………………………………………………………………………………………….. 4 mm
• weight ………………………………………………………………………………………………………….9.5 kg

Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our website www.perel.eu. The information in this manual is subject to change without prior notice.

© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the prior written consent of the copyright holder.

Velleman® Service and Quality Warranty

Since its foundation in 1972, Velleman® acquired extensive experience in the electronics world and currently distributes its products in over 85 countries.
All our products fulfil strict quality requirements and legal stipulations in the EU. In order to ensure the quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organisations. If, all precautionary measures notwithstanding, problems should occur, please make appeal to our warranty (see guarantee conditions).

General Warranty Conditions Concerning Consumer Products (for EU):

• All consumer products are subject to a 24-month warranty on production flaws and defective material as from the original date of purchase.

• Velleman® can decide to replace an article with an equivalent article, or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion.
  You will be delivered a replacing article or a refund at the value of 100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.

• Not covered by warranty:

  • all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity…), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits;
  • consumable goods, parts or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, nonrechargeable, built-in or replaceable), lamps, rubber parts, drive belts… (unlimited list);
  • flaws resulting from fire, water damage, lightning, accident, natural disaster, etc.…;
  • flaws caused deliberately, negligently or resulting from improper handling, negligent maintenance, abusive use or use contrary to the manufacturer’s instructions;
  • damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) months when the article is used professionally);
  • damage resulting from an inappropriate packing and shipping of the article;
  • all damage caused by modification, repair or alteration performed by a third party without written permission by Velleman®.

• Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.

• Hint: In order to save on cost and time, please reread the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.

• Repairs occurring after warranty expiration are subject to shipping costs.

• The above conditions are without prejudice to all commercial warranties.
  The above enumeration is subject to modification according to the article (see article’s manual).

Made in PRC
Imported for PEREL by Velleman nv
Legen Heirweg 33, 9890 Gavere, Belgium
www.perel.eu

References

• Details – Own brands – Velleman – Wholesaler and developer of electronics

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>