PEREL EWL330 LED Work Light with Tripod User Manual

PEREL EWL330 LED Work Light with Tripod

Product Information

• Product Name: EWL330/EWL350

• User Manual Languages: English, Dutch, French, Spanish, German,Portuguese

• Product Features:

  • Die-cast aluminium housing with tempered glass for maximum heat
    dissipation

  • Ribbed design for enhanced heat dissipation

  • Extendable tripod (75-150 cm)

  • Suited for outdoor use (IP65)

Product Usage Instructions

Introduction

Important environmental information about this product for residents of the European Union.

1. Safety Instructions

   • Keep the device away from children and unauthorized users.
   • Risk of electroshock when opening the cover. Do not disassemble or open the housing yourself. Have the device repaired by qualified personnel.
   • If the power cable is damaged, replace it with a new one from the manufacturer or a qualified person.
   • Always disconnect mains power when the device is not in use or during servicing or maintenance activities. Handle the power cord by the plug only.
   • Do not disassemble or open the cover. Refer to an authorized dealer for service and spare parts.
   • Avoid looking at the operating lamp to prevent eye injury.
   • The device heats up during use. Maintain a minimum distance of 1 m between the device’s light output and any illuminated surface.
   • The device falls under protection class I. Ensure it is properly earthed. Install and service the device with the help of a qualified technician.
   • Do not crimp the power cord and protect it against damage.
     Replace it if necessary.

2. General Guidelines

   • Keep the device away from extreme temperatures.
   • Protect the device from shocks and abuse. Avoid using brute force when operating it.
   • The device is not suitable for dimming.
   • Do not use the luminaire with a cracked or broken protective glass. Disconnect it from the mains and have it repaired by a qualified technician.
   • Familiarize yourself with the functions of the device before using it. Modifications to the device are forbidden for safety reasons.
   • Use the device only for its intended purpose. Using it in an unauthorized way may lead to various risks.
   • Damage caused by disregarding guidelines in this manual is not covered by the warranty.
   • Use the original packaging for transportation.
   • Keep this manual for future reference.

3. Installation

4. Place the device on a flat and sturdy surface.

5. To adjust the height, hold the upper pole and loosen the pole connector. Slide the upper pole to the desired height and tighten the pole connector.

Introduction

To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.
Thank you for choosing Perel! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, don’t install or use it and contact your dealer.

Safety Instructions

can cause life-threatening electroshocks. Do not disassemble or open the housing yourself. Have the device repaired by qualified personnel.

Warning : If the power cable is damaged, it must be replaced by the manufacturer, his service agent, or a similar qualified person in order to avoid any hazard.

| Always disconnect mains power when device not in use or when servicing or maintenance activities are performed. Handle the power cord by the plug only.
| DO NOT disassemble or open the cover. There are no user- serviceable parts inside the device. Refer to an authorized dealer for service and/or spare parts.
**| Caution : possibly hazardous optical radiation emitted from this product. Do not look at operating lamp. Eye injury may result.
**| Caution : device heats up during use.
****| Respect a minimum distance of 1 m between the device’s light output and any illuminated surface.

• This device falls under protection class I. It is therefore essential that the device be earthed. A qualified technician should install and service this device.
• Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
• Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if necessary.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

| Keep this device away from extreme temperatures.
---|---
| Protect this device from shocks and abuse. Avoid brute force when operating the device.
| This device is not suitable for dimming.
| Do not use the luminaire with a cracked or broken protective glass. Disconnect immediately from the mains and have it repaired by a qualified technician.

• Familiarise yourself with the functions of the device before actually using it.
• All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the device is not covered by the warranty.
• Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the warranty.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.
• Use the original packaging if the device is to be transported.
• Keep this manual for future reference.

Features

• die-cast aluminium housing with tempered glass
• ribbed for maximum heat dissipation
• extendable tripod (75-150 cm)
• suited for outdoor use (IP65).

Overview

Refer to the illustrations on page 2 of this manual.

Installation

1. Place the device on a flat and sturdy surface.
2. To adjust the height, hold the upper pole [4] and loosen the pole connector [5]. Slide the upper pole to the desired height and tighten the pole connector.
3. To point the lamp in the desired direction: loosen the hinges [3] using a spanner. Tilt the lamp in the desired angle and tighten the hinges.
4. Connect the power cord to a suitable, earthed mains outlet.

Cleaning and Maintenance

• All screws should be tight and free of corrosion.
• Mechanically moving parts must not show any signs of wear and tear.
• The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
• If the protective glass [2] is damaged, disconnect the lamp immediately from the mains. Have it repaired immediately by a qualified technician. Do not use the lamp with a cracked or broken protective glass.
• Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
• There are no user-serviceable parts.
• Contact your dealer for spare parts if necessary.

Technical Specifications

Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our website www.perel.eu.
The information in this manual is subject to change without prior notice.

© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the prior written consent of the copyright holder.

Velleman® Service and Quality Warranty

Since its foundation in 1972, Velleman® acquired extensive experience in the electronics world and currently distributes its products in over 85 countries.
All our products fulfil strict quality requirements and legal stipulations in the EU. In order to ensure the quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organisations. If, all precautionary measures notwithstanding, problems should occur, please make appeal to our warranty (see guarantee conditions).

General Warranty Conditions Concerning Consumer Products (for EU):

• All consumer products are subject to a 24-month warranty on production flaws and defective material as from the original date of purchase.

• Velleman® can decide to replace an article with an equivalent article, or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion.
  You will be delivered a replacing article or a refund at the value of 100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.

• Not covered by warranty:

  • all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity…), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits;
  • consumable goods, parts or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, nonrechargeable, built-in or replaceable), lamps, rubber parts, drive belts… (unlimited list);
  • flaws resulting from fire, water damage, lightning, accident, natural disaster, etc.…;
  • flaws caused deliberately, negligently or resulting from improper handling, negligent maintenance, abusive use or use contrary to the manufacturer’s instructions;
  • damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) months when the article is used professionally);
  • damage resulting from an inappropriate packing and shipping of the article;
  • all damage caused by modification, repair or alteration performed by a third party without written permission by Velleman®.

• Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.

• Hint: In order to save on cost and time, please reread the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.

• Repairs occurring after warranty expiration are subject to shipping costs.

• The above conditions are without prejudice to all commercial warranties.

The above enumeration is subject to modification according to the article (see article’s manual).

Made in PRC
Imported for PEREL by Velleman nv
Legen Heirweg 33, 9890 Gavere, Belgium
www.perel.eu

References

• Details – Own brands – Velleman – Wholesaler and developer of electronics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>