hama 00014169 FM Transmitter with Bluetooth Function Instruction Manual

June 12, 2024
Hama

hama LOGO FM Transmitter with Bluetooth® Function
00 014169

hama 00014169 FM Transmitter with Bluetooth Function Operating Instructions

hama 00014169 FM Transmitter with Bluetooth Function - FIGURE
1

 Controts and displays

  1. USB-C charging connection with Power Delivery technology (PD)
  2. USB-A charging connection with Qualcomm QuickCharge 3.0 technology
  3. Displayfrequency indicator
  4. Previous track / Volume – / Previous frequency
  5. Play/ Start ¢ Pause / Frequency activation
  6. Micro-SD card slot
  7. Previous track Volume + / Next frequency

Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of warning symbols and notes

Risk of electric shock
This symbol indicates a risk of electric shock from touching «ninsulated product parts that may carry hazardous voltage.
Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.

Package contents

  • FM transmitter with Bluetoarr® function
  • These operating instructions

 Safety instructions

  • The product is intended for private, non-commercial use only.
  • Use the product only for the intended purpose.
  • Do not operate the product outside the power jimits given in the specifications.
  • Protect the product from dirt, moisture and overheating and use it in dry environments only.
  • Do not use the product in a damp environment and avoid splashing water.
  • Do not bend or crush the cable.
  • Always pull directly on the plug when disconnecting the cable, never on the cable itself.
  • Do not drop the product and do not expose it to any major shocks.
  • Dispose of packaging material immediately in accordance with the locally applicable requiations.
  • Do not modify the product in any way. Doing so voids the warranty.
  • Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
  • Only use the article under moderate climatic conditions.
  • Aswith all electrical products, this device should be kept out of the reach of children.
  • Do not use the product in areas in which electronic products are not permitted.

Note

  •  When using this product, observe the applicable local traffic laws and regulations.
  • Take care that components such as airbags, safety areas, controls, instruments, etc. and visibility are not blocked or restricted.
  • Ensure that the product is securely mounted before every journey.
  • Donot allow yourself to be distracted by the product when driving a vehicle. Always pay attention to the surrounding traffic and your environment.

Risk of electric shock

  • Donot open the device or continue to operate it if it becomes damaged.
  • Donot use the product if the charging cable, adapter cable or power cable is damaged.
  • Donot attempt to service or repair the product yourself. Leave any and all service work to qualified experts.

Product characteristics

The FM transmitter is used to send music or speech from a mobile device (smartphone, tablet, etc.) in high quality to an FM playback device (e.g. car radio) in the car, caravan or boat. At the same time, up to two devices can be charged simultaneously via
the USB ports. The FM transmitter is compatible with all devices that have a B/vetooth® function. The FM transmitter can also send music or voice directly from a micro-SD card (max. 32GB).

 Start-up and operation

  • Plug the FM transmitter into a car power socket, then establish the Bluetooth ® connection between the mobile device and the FM transmitter as described below.
  • Alternatively, audio files can be transferred directly from a USB stick or a micro-SD card.

Note

  • On some types of vehicle, the ignition must be switched on for the voltage to travel to the 12V vehicle socket. For more information, please refer to your vehicle’s owners’ manual.
  • Disconnect all cable and vehicle electrical system connections after use.

6.1 Bluetooth® pairing
Note

  • Check whether your mobile device (MP3 player, mobile phone, etc.) is Bluetooth ® -capable.
  • If not, you can only use the FM transmitter for playback by means of a USB stick or a micro-SD card.
  • Note that the maximum range for Bluetooth® is 10 metres without obstacles such as walls, people, etc.
  • Ensure your Bluetooth® enabled device is switched on and that Bluetooth is activated.
  • Plug the FM transmitter into a car socket that is close to the car radio
  • Ensure that the FM transmitter is within the Bluetooth® range of max. 10 metres.
  • Open the Bluetooth® settings on your device and wait until the list of found Bluetooth® devices shows BT21C.
  • Select BT21C and wait until the FM transmitter is showing as connected in your device’s Bluetooth® settings. The display now shows a transmission frequency.

Note – Bluetooth® password
Some devices require a password in order to connect to another Bluetooth® device.

  • If your device requests a password to connect to the FM transmitter, enter 0000.

Note – connection impaired
After the FM transmitter and device have been paired, a connection is established automatically. If the Bluetooth® connection is not established automatically, check the following:

  • In the device’s Bluetooth® settings, check whether BT21C is connected. If not, repeat the steps listed under Bluetooth® pairing.
  • Check whether the device and FM transmitter are less than 10 metres apart. If not, move them closer together.
  • Check whether obstacles are impairing the range. If so,move the devices closer together.

6.2 Audio playback (via Bluetooth ®)
Start and control audio playback accordingly on the connected device. Alternatively, the audio playback can also be controlled from the FM transmitter (provided the connected device supports this).

  • Press the function key   to start or stop the audio playback.
  • Press the function key > to skip forward one track.
  • Press the function key <to skip backwards.

6.3 Audio playback via micro-SD card

  • Insert a micro-SD card into the card slot (6) on the FM transmitter. Playback starts automatically.

Note

  • The capacity of the micro-SD card must not exceed 32 GB.
  • Only the following formats can be played back: MP3.

6.4 Manual station search

  • Search for a free frequency (noise without signal fragments) on your car radio.
  • Set the same frequency on the FM transmitter. To do this, press the button (5) for approx. 2 sec. until the frequency indicator on the display (3) starts flashing.
  • Then set the desired frequency by pressing the < or > keys.
  • The FM transmitter always automatically stores the last frequency set.

Note – Automatic standby

  • The FM transmitter switches off automatically after approx. 50-60 sec. without a music signal or key input (standby).
  • The FM transmitter is reactivated by a music signal or key input.

6.5 Charging function
The FM transmitter has two USB charging sockets. These supply the charging currents specified in Point 7 of the technical data.
Note – car battery
With some vehicles, it can happen that power continues to be supplied even though the ignition has been switched off. You should therefore disconnect the product from the line connection when not in use to protect your car battery from being drained.
Note – connecting devices

  • Before connecting a device, check whether it can be adequately supplied with the charger’s current capacity.
  • Ensure that the total current consumption of all the connected devices does not exceed 3000 mA.
  • Note the instructions in your device’s operating manual.
  • Disconnect all cable and mains connections after use.

Note – Power Delivery / QC 3.0, 2.0

  • Plug & GO: no additional software required, simply plug in and start: Thanks to Power Delivery / QC 3.0, 2.0, the voltage and power are adjusted automatically.
  • Be aware that, for efficient and optimised charging, your terminal device must support the PD (Power Delivery)/ QC 3.0, 2.0 function.
  • If you have a large number of PD/QC-enabled devices with different firmware updates, it may be that the function is not fully supported.

6.6 Hands-free function

  • The FM transmitter has an integrated hands-free function thanks to the built-in microphone.
  • When a call comes in, the device automatically switches from music mode to hands-free mode. In this case, simply press the button to answer the call.
  • To end the call, press the button again.
  • If you press the button twice in succession, the last number dialled is automatically called.

Care and maintenance

Only clean this product using a lint-free, slightly damp cloth and do not use any harsh cleaners.
**** Note
Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Technical data

**** FM transmitter with Bluetooth function
Bluetooth technology Bluetooth® v5.3
Input voltage 12 —16V
Input current 4A

Output voltage and current
at USB 1 (marked with ill
symbol)| 5V 3A
9V
2.22A
12V: 1.67A
Output current USB 2
(marked with QC 3.0)| 5V
3A
9V 2A
12V:
1.5A

Declaration of conformity

Hama GmbH & Co KG hereby declares that the radio equipment type [00014169] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address:
https://de.hama.com 00014169 Downloads

Frequency for the Bluetooth® transfers 2.402 GHz ~ 2.480 GHz
Bluetooth® transmission power Max. 20 dBm
VHF frequency range 87.6 – 107.9 MHz
Power transmitted Max. -43 dBm

hama LOGOHama GmbH & Co KG
86652 Monheim / Germany
Service & Support
www.hama.com
+49 9091 502-0

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Hama GmbH & Co KG is under license. Other trademarks and trade names are those of their respective owners.
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.
00014169/07.23

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals