Baseus BS-PC027 Brilliance Series Magnetic Keyboard Case User Manual

Baseus BS-PC027 Brilliance Series Magnetic Keyboard Case

Bluetooth Pairing

Step 1: Toggle the power switch to ON, press and hold , indicator lights up blue for 2s and starts flashing, meaning the keyboard is in pairing mode.
Step 2: Go to Settings on the Pad and turn on the Bluetooth, and “Baseus- PC027” will show up in “OTHER DEVICES”.
Step 3: Select “Baseus-PC027”, “Bluetooth Pairing Request” prompts, and click “Pair”.
The indicator goes out after a few seconds, meaning the pairing is successful.
Note: If the keyboard has been paired to the Pad before, indicator 2 will light up for 2s and go out after power-on, and the keyboard will automatically connect to the Pad.

Shortcut Keys
cmd+A: Select all cmd+S: Save cmd+F: Find cmd+Z: Undo cmd+shift+4: Screenshot

Indicator

Indicator

| Blue light on| Caps Lock on
Blue light off| Caps Lock off
Blue light on for 2s and starts flashing| In pairing mode
Blue light on for 2s and goes out| Pairing successful
Blue light flashes for 4 times| Failed to connect back
Red light on (off when fully charged)| In charging
Red light flashes| Low battery

Charging

1. When the battery is low, the indicator will flash red (to remind you to charge the keyboard) until the keyboard shuts down.
2. During charging, the indicator lights up red and goes out when fully charged.

Auto Sleep Mode
The keyboard will automatically go to sleep after 20min of no operation, during which time the Bluetooth connection will be cut off, press any key to wake it up and it will automatically re-connect to the Pad.

Product Specifications

Cautions

1. Please DO NOT keep the product near heat sources or any fire sources, such as electric heaters, microwaves, ovens, water heaters, stoves, candles, etc.
2. Please DO NOT use the product in dusty, humid, or filthy environments or places near magnetic fields, for it may cause malfunction.
3. Please keep the product and its accessories dry. Please DO NOT use hair dryers or any other heating devices to dry the product if it gets wet.
4. Please avoid any strong impacts or actions on this product.
5. Please DO NOT use any strong chemicals or detergent to clean the product. Please use a soft and dry cleaning cloth to wipe the product.

Declaration on hazardous substances and elements contained in electronic

products

This form is compiled in accordance with SJ/T 11364.
O: It indicates that the content of the harmful substance in all homogeneous materials of the component is below the limit specified in GB/T 26572 standard.
X: The content of harmful substances in at least one homogeneous material of this part exceeds the limit stipulated in GB/T 26572 standard.
Warm Tip: The 5-year icon refers to the “effective life of environmental protection*, not the product quality assurance period. Electronic products all contain harmful substances such as lead, mercury, and cadmium.

Once they are overused, harmful substances may leak or mutate, cause pollution to the environment, or cause serious damage to people and property. The term “environmental protection use” means that all electronic products will be required to use within this effective period. We will no longer be responsible for the quality of the products due to the safety risks that arise after the safe use period.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction. It is hereby declared that BS-PC027, a product model of Shenzhen Baseus Technology Co., Ltd., complies with the provisions of Directive 2014/53/EU, Directive 2011/65/EU. The full text of the EC Declaration of Conformity can be found on the following website: www.baseus.com

This equipment complies with the provisions of Directive 2012/19/EU, 2006/66/EU. It is strictly forbidden to dispose of this equipment with ordinary trash; it must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash, and must be delivered to a recycling center that is capable of recycling electronic and electrical equipment.

Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Add: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd,
Gangtou Community, Bantian Street, Longgang District, Shenzhen
Executive Standard: GB 4943.1
Hotline: +86-4000-712-711 Website: www.baseus.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>