APC APV9601 Easy UPS SNMP Card User Manual
- June 12, 2024
- APC
Table of Contents
APC APV9601 Easy UPS SNMP Card
Important Safety Information
Read the instructions carefully and look at the equipment to become familiar with the device before trying to install, operate, service or maintain it. The following special messages may appear throughout this document or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure.
Danger: The addition of this symbol to a Danger or Warning product safety
label indicates that an electrical hazard exists that will result in personal
injury if the instructions are not followed.
Warning: This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGER: DANGER indicates a hazardous situation that, if not avoided, will
result in death or serious injury.
WARNING: WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: CAUTION indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NOTICE: NOTICE is used to address practices not related to physical
injury.
Product Description
Integrated with SchneiderUPS software, devices with the SNMP Card installed can be monitored and controlled in the LAN. These devices can manage using SNMP Protocol versions 1, 2c and 3 standards.
APV9601 SNMP Card:
- Provides support for SchneiderUPS Network Shutdown.
- Supports using a Dynamic Host Configuration Protocol (DHCP) to provide the network (TCP/IP) values of the NMC.
Devices in which you can install the SNMP Card
The SNMP Card can be installed in any compatible device that has an Intelligent Card Slot, including:
- Easy UPS On-Line: SRV series UPS
Package Contents
The packaging is recyclable; save it for reuse or dispose of it properly.
Disclaimer
APC by Schneider Electric is not responsible for damage sustained during the reshipment of this product.
- The SNMP Card is sensitive to static electricity. When handling the SNMP Card, touch only the end plate while using one or more of these electrostatic-discharge devices (ESDs): wrist straps, heel straps, toe straps, or conductive shoes.
- The shipping materials are recyclable. Save them for later use, or dispose of them appropriately.
Product Overview
Front Panel
****| Sensor port| Connects SNMP card to temperature or smoke sensor (this
accessory is not available for SRV and SRVS series).
---|---|---
| 10/100 Base-T connector| Connects SNMP card to the Ethernet network.
| Status LED| See “Status LED”.
Status LED
| Color LED | Condition | Description |
|---|---|---|
| 100M LED (Green) | Flash | Port is operating at 100Mbit/s |
| Off | Card is not connected to the network | |
| 10M LED (Yellow) | Flash | Port is operating at 10Mbit/s |
| Off | Card is not connected to the network |
Specifications
Physical| Dimensions with package Width x Height x Depth| 168 mm
(6.61in) x 42 mm (1.65in) x 132 mm (5.2in)
---|---|---
Dimensions without package Width x Height x Depth| 47 mm (1.85in) x 25
mm (0.98in) x 80 mm (3.15 in)
Weight with package| 0.3 kg (0.66 lb)
Weight without package| 0.11 kg (0.24 lb)
Temperature| Operating| 0 to 40 °C (32 to 104 °F)
Storage| -15 to 50 °C (5 to 122 °F)
Humidity| Operating| 0 to 95% relative humidity, non-condensing
Supported Protocol| Network| Auto-sense 10/100 Mbps Fast Ethernet
RJ45 LAN Connector
Network Protocol| TCP/IP, UDP, SNMP-V1, SNMP-V2, SNMP-V3
SNMP MIB| RFC1213, RFC1628
Installation
Install the SNMP card
- You do not need to turn off power to install the SNMP Card in a supported Easy UPS.
- The SNMP Card is sensitive to static electricity. When handling the SNMP Card, touch only the end plate while using one or more of these electrostatic-discharge devices (ESDs): wrist straps, heel straps, toe straps, or conductive shoes.
- For the location of the UPS Intelligent Card Slot, see the UPS User Manual.
-
Remove the cover of the Intelligent Card Slot on the back of the UPS and retain the screws.
-
Slide the card into the open slot and secure it with the screws from step 1.
-
Connect a network interface cable to the 10/100 Base-T network connector (RJ-45) A on the SNMP Card.
When the network interface cable is connected, the SNMP Card will attempt to obtain an IP address via DHCP. See “Configuration methods” on page 6.
Quick **Configuration
**
Configuration Method
-
Please install SchneiderUPS monitoring software on your PC. After the software is installed successfully, it will pop up a plug icon in the tray. Select “SNMP manager” by clicking the right button of the mouse.
-
Enter the specific IP address to search all SNMP devices in LAN. (The SNMP manager will automatically collect the IP address from the server by default via a DHCP server. It will apply the default IP address of 192.168.102.230, default subnet mask as 255.255.255.0, and default gateway as 192.168.102.254 without a DHCP server.
-
You can modify IP settings, online upgrades, password management, and static trap address setting in the SNMP Manager interface. It is necessary to enter a password for any modification. The default password is 12345678.
Monitoring
-
After all setting is complete, select “Open Monitor” by clicking the right button of the mouse.
NOTE: For enhanced security, change the SNMP version to V3 in System management and change the default password. -
Then, it will open the monitor view. Refer to the below chart.
Please check
the Schneider UPS monitoring software manual in the install location or in the
CD.
APC by Schneider Electric Worldwide Customer Support
Customer support for this or any other APC by Schneider Electric product is available at no charge in any of the following ways:
- Visit the APC by Schneider Electric website to access documents in the APC by Schneider Electric Knowledge Base and to submit customer support requests.
- www.apc.com (Corporate Headquarters)
- Connect to localized APC by Schneider Electric websites for specific countries, each of which provides customer support information.
- www.apc.com/support/
- Global support searching APC by Schneider Electric Knowledge Base and using e-support.
- Contact the APC by Schneider Electric Customer Support Center by telephone or e-mail.
- Local, country-specific centers: go to www.apc.com/support/contact for contact information.
For information on how to obtain local customer support, contact the APC by
Schneider Electric representative or other distributors from whom you
purchased your APC by Schneider Electric product.
© 2020 APC by Schneider Electric. APC, the APC logo are owned by Schneider
Electric Industries S.A.S., or their affiliated companies. All other
trademarks are the property of their respective owners.
FAQ’s
What is the KYOCERA ECOSYS M5526cdw Color Laser Printer?
The KYOCERA ECOSYS M5526cdw is a color laser printer designed to cater to the printing, scanning, copying, and faxing needs of small offices and workgroups.
What printing technology does the ECOSYS M5526cdw use?
The printer employs color laser printing technology, ensuring high-quality prints with sharp text and vibrant graphics.
What is the printing speed of the ECOSYS M5526cdw?
The printer typically achieves printing speeds of up to 26 pages per minute (ppm) for both color and monochrome documents.
What is the maximum print resolution of the printer?
The KYOCERA ECOSYS M5526cdw usually delivers a maximum print resolution of 1200 x 1200 dots per inch (dpi), resulting in clear and precise output.
Is the printer capable of automatic duplex (double-sided) printing?
Yes, the ECOSYS M5526cdw features an automatic duplex printing feature, allowing efficient and eco-friendly double-sided printing.
What paper sizes and types does the printer support?
The printer typically supports a variety of paper sizes, including letter, legal, A4, A5, and more, and accommodates various paper types, such as plain, bond, and envelopes.
Does the ECOSYS M5526cdw have mobile printing capabilities?
Yes, the printer offers mobile printing options, enabling users to print from smartphones and tablets using Kyocera Mobile Print or other compatible apps.
Is the printer compatible with cloud printing services?
Yes, the ECOSYS M5526cdw is usually compatible with cloud printing services, such as Google Cloud Print, facilitating printing from cloud storage and email accounts.
Does the printer have a built-in scanner?
Yes, the printer is equipped with a built-in color scanner, allowing users to scan documents to various file formats and destinations.
Can the ECOSYS M5526cdw be used as a standalone copier?
Certainly, the printer functions as a standalone copier, providing both color and monochrome copying capabilities.
Does the printer support network connectivity?
Yes, the KYOCERA ECOSYS M5526cdw typically offers wired and wireless network connectivity options, making it easy to share the printer among multiple users.
Is the ECOSYS M5526cdw Energy Star certified?
Yes, the printer is usually Energy Star certified, meeting stringent energy efficiency guidelines to reduce power consumption and its environmental impact.
Reference:APC APV9601 Easy UPS SNMP Card – Device.report
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>