PETZL C0061100H SEQUOIA SRT Instruction Manual
- June 12, 2024
- PETZL
Table of Contents
C0061100H SEQUOIA SRT
Instruction Manual
3 your guarantee
Arborist seat hamness
Warning
Activities involving the use of this equipment are inherently dangerous.
You are responsible for your own actions and decisions.
Before using this equipment, you must:
– Read and understand all Instructions for Use.
– Get specific training in its proper use.
– Become acquainted with its capabilities and limitations.
– Understand and accept the risks involved.
FAILURE TO HEED ANY OF THESE WARNINGS MAY RESULT IN SEVERE INJURY OR DEATH.
PE1ZL FR-38920
Crolles Cidex 105A
PETZL.COM
ISO 9001 © Petzl
Sustaining our Community
FONDATION-PETZL.ORG
C0061100H SEQUOIA SRT
Traceability and markings
Spare parts & accessories
Attachment bridge S
GOBICAD
Attachment bridge M
COBICAOT
Attachment bridge L
(COBACA02
Adjustable attachment bridge
SEQUOIA / SEQUOIA SRT C69R
EAC SPECIFICATIONS
foCT PEN582015
1OCT B a1 2008
-
Field of application text pary
-
NOmenclature
-
Inspection, points to verify
-
Compatibility text pary
-
How to put the harness on
a. Belt waist
b. Legs
loops
c. Adjusting the
height of the attachment bridge 
d. Installing the attachment bridges 
-
EN 368: 2018 harness for work positioning and restraint
-
Seat harness EN 813: 2008
-
Equipment loops
-
Additional information
This product is compliant with the Regulation 2016/425 on Personal Protective
Equipment as brought into UK law and amended.
Approved body performing the UKCA type examination and the production control
of this PPE :
SGS United Kingdom Ltd Inward Way Rossmore Business Park Ellesmere Port,
Cheshire, CH65 3EN United Kingdom N° 0120
Authorized Representative in UK : PETZL UK Agency, Unit 3-7, Tebay Business
Park, Old Tebay, Penrith, CA10 386, United Kingdom
These instructions explain how to correctly use your equipment. Only certain
techniques and uses are described.
The warning symbols inform you of some potential dangers related to the use of
your equipment, but it is impossible to describe them all. Check Petzl.com for
updates and additional information.
You are responsible for heeding each warning and using your equipment
correctly. Any misuse of this equipment will create additional dangers.
Contact Petzl if you have any doubts or difficulty understanding these
instructions.
Field of application
Personal protective equipment (PPE) used for fall protection from height.
Sit harness, work positioning and restraint belt for tree care work.
Nominal maximum load: 140 kg.
This product must not be pushed beyond its limits, nor be used for any purpose
other than that for which it is designed.
Responsibility
WARNING
Activities involving the use of this equipment are inherently dangerous.
You are responsible for your own actions, decisions and safety.
Before using this equipment, you must:
– Read and understand all Instructions for Use.
– Get specific training in its proper use.
– Become acquainted with its capabilities and limitations.
– Understand and accept the risks involved.
Failure to heed any of these warnings may result in severe injury or death.
This product must only be used by competent and responsible persons, or those
placed under the direct and visual control of a competent and responsible
person.
You are responsible for your actions, your decisions and your safety and you
assume the consequences of same. If you are not able, or not in a position to
assume this responsibility, or if you do not fully understand the Instructions
for Use, do not use this equipment.
Nomenclature
(1) Waistbelt strap, (2) Leg loops, (3) FAST LT PLUS buckles, (4) DOUBLEBACK
PLUS selflocking buckle, (5) Side attachment points, (6) Attachment bridge,
(7) Gated attachment points, (8) Ventral attachment point, (9) Bridge height
adjustment straps, (10) DOUBLEBACK buckles for bridge height adjustment, (11)
Shoulder strap rear attachment loops, (12) TOP/TOP CROLL rear attachment
buckle, (13) Chainsaw holder, (14) Equipment loops, (15) Slot for tool
carrier, (16) Elastic band for first-aid kit, (17) Attachment hole for
additional attachment bridge, (18) Attachment hole for seat, (19) Excess strap
winder, (20) Buckle lock.
Principal materials:
Straps: polyester.
Adjustment buckles: steel.
Attachment points: aluminum alloy.
Inspection, points to verify
Your safety depends upon the integrity of your equipment.
Petzl recommends a detailed inspection by a competent person at least once
every 12 months (depending on current regulations in your country, and your
conditions of usage).
WARNING: your intensity of use may cause you to inspect your PPE more
frequently. Follow the procedures described at Petzl.com. Record the results
on your PPE inspection form: type,model, manufacturer contact info, serial
number or individual number, dates: manufacture, purchase, first use, next
periodic inspection; problems, comments, inspector’s name and signature.
Before each use
Check the condition of the waistbelt and leg loop straps, especially at the
attachment points, the adjustment buckles and the safety stitching.
Look for cuts, wear and damage due to use, to heat, to chemicals… Be
particularly careful to check for cut or loose threads.
Verify that the DOUBLEBACK, DOUBLEBACK PLUS and FAST LT PLUS buckles function
properly. Check the gated attachment points: body, spacer. Make sure the screw
is securely tightened (correct installation, lack of play…).
Check the condition of the attachment bridge: make sure the rope has no cuts,
burns, frayed strands, fuzzy areas, or signs of chemicals…
Check the condition of the ventral attachment point: make sure the strap has
no cuts, burns, frayed strands, fuzzy areas, or signs of chemicals…
During use
It is important to regularly monitor the condition of the product and its
connections to the other equipment in the system. Make sure that all items of
equipment are correctly positioned with respect to each other. Regularly check
the adjustment buckles.
Regularly check that the buckles are locked. Avoid any pressure or rubbing
that could damage or unlock the buckle.
Compatibility
Verify that this product is compatible with the other elements of the system
in your application (compatible = good functional interaction).
Equipment used with your harness must meet current standards in your country
(e.g. EN 362 carabiners).
Harness setup
– Be sure to correctly stow the excess strap (folded flat) in the keepers, or
wrap it on the provided winders.
– Beware of foreign objects that could impede the operation of the FAST LT
PLUS buckles (e.g.pebbles, sand, clothing…). Verify that they are securely
fastened.
5a. 5b. Adjustment and suspension test
Your harness must be adjusted to fit snugly to reduce the risk of injury in
the event of a fall.
In a safe environment, you must move around and hang in the harness from each
attachmentpoint, with your equipment, to verify that the harness fits
properly, provides adequate comfort for the intended use and that it is
optimally adjusted.
5c. Adjusting the sitting position
Use the DOUBLEBACK buckles for bridge height adjustment, then lock them with
the buckle locks.
5d. Attachment bridges
Carry out the mounting in a suitable location to avoid losing the spacer or
screw. Make sure the O-ring is present on the screw. This O-ring helps prevent
the screw from loosening in the event it is not properly tightened. If the
O-ring is missing, contact Petzl after-sales service.
To ensure proper performance of your device, the screw must be correctly
installed and tightened to the indicated torque. Using a torque wrench is the
only way to verify that the tightening torque is correct.
Verify there is no play in the spacer. A gated attachment point is secure only
if the screw is completely tightened.
EN 358: 2018 belt for work positioning and restraint
These attachment points are designed to either hold the user in position at
the workstation, or to prevent the worker from entering a zone where a fall is
possible.
Do not use a work positioning belt if there is a foreseeable risk of the user
becoming suspended or exposed to uncontrolled tension on the belt. For work
positioning, use an anchor point situated at or above waist level.
These attachment points are not designed for fall-arrest usage. It may be
necessary to supplement work positioning or restraint systems with collective
or personal fall-arrest systems. The waistbelt is approved for one user,
including his/her tools and equipment, for a maximum total weight of 150 kg.
6a. Gated attachment points
The two gated attachment points must always be used together.
6b. Waistbelt side attachment points
The two side attachment points must always be used together.
EN 813: 2008 sit harness
Designed for progression on rope and work positioning.
Use the attachment bridge to attach a descender, positioning lanyards or
progression lanyards.
Use the ventral attachment point to attach a rope clamp or shoulder straps.
This attachment point is not suitable for fall arrest.
Equipment loops
Equipment loops must only be used for equipment.
WARNING – DANGER: never use equipment loops for belaying, rappelling,
tying in, or anchoring a person.
Additional Information
This product meets the requirements of Regulation (EU) 2016/425 on personal
protective equipment. The EU declaration of conformity is available at
Petzl.com.
– The melting point of high-modulus polyethylene (140° C) is lower than that
of nylon and polyester.
– You must have a rescue plan and the means to rapidly implement it in case of
difficulties encountered while using this equipment.
– The anchor point for the system should preferably be located above the
user’s position and should meet the requirements of the EN 795 standard (12 kN
minimum strength).
– In a fall-arrest system, it is essential to check the required clearance
below the user before each use, in order to avoid hitting the ground or an
obstacle in case of a fall.
– Make sure that the anchor point is correctly positioned, in order to limit
the risk and the length of a fall.
– A fall-arrest harness is the only device allowable for supporting the body
in a fall-arrest system.
– When using multiple items of equipment, a dangerous situation can arise in
which the safety function of an item of equipment can be affected by the
safety function of another item of equipment.
– WARNING: ensure that your products do not rub against abrasive or sharp
surfaces.
– Users must be medically fit for activities at height. WARNING: inert
suspension in a harness can result in serious injury or death.
– The Instructions for Use for each item of equipment used in conjunction with
this product must be followed.
– The Instructions for Use must be provided to the user of this equipment, in
the language of the country where the equipment is used.
– Make sure the markings on the product are legible.
When to retire your equipment:
WARNING: an exceptional event can lead you to retire a product after only
one use, depending on the type and intensity of usage and the environment of
usage (harsh environments, marine environments, sharp edges, extreme
temperatures, chemicals…).
A product must be retired when:
– It is over 10 years old and made of plastic or textiles.
– It has been subjected to a major fall or load.
– It fails to pass inspection. You have any doubt as to its reliability.
– You do not know its full usage history.
– When it becomes obsolete due to changes in legislation, standards, technique
or incompatibility with other equipment…
Destroy these products to prevent further use.
Icons:
A. Lifetime: 10 years – B. Marking – C. Acceptable temperatures – D. Usage
precautions – E. Cleaning/disinfection – F. Drying – G. Storage/transport – H.
Maintenance – I. Modifications/repairs (prohibited outside of Petzl
facilities, except replacement parts) – J.
Questions/contact
3-year guarantee
Against any material or manufacturing defect. Exclusions: normal wear and
tear, oxidation, modifications or alterations, incorrect storage, poor
maintenance, negligence, uses for which this product is not designed.
Warning symbols
1. Situation presenting an imminent risk of serious injury or death. 2.
Exposure to a potential risk of accident or injury. 3. Important information
on the functioning or performance of your product. 4. Equipment
incompatibility.
Traceability and markings
a. Meets PPE regulatory requirements. Notified body performing the EU type
examination – b. Number of the notified body responsible for the production
control of this PPE – c. Traceability: datamatrix – d. Serial number – e. Year
of manufacture – f. Month of manufacture – g. Batch number – h. Individual
identifier – i. Standards – j. Read the Instructions for Use carefully – k.
Model identification – l. Manufacturer address – m. Date of manufacture
(month/year) – o. Nominal load – p. Size
TECHNICAL NOTICE SEQUOIA SRT
C0061100H (300622)
Documents / Resources
|
PETZL C0061100H SEQUOIA
SRT
[pdf] Instruction Manual
C0061100H SEQUOIA SRT, C0061100H, SEQUOIA SRT, SRT
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>