SQ11 Wi-Fi mini DV

USER MANUAL

SQ11 WIFI Manual. Android.

Charging.

Please use a 500-1000 mA charger to charge the equipment. When charging, the red indicator light is always on. When it is full, the red indicator light is off. Can work while charging.

Turn on the device.

Press the power button to start the machine. After starting the machine, the blue indicator light flashes continuously and quickly, and the device enters the state to be connected.

Note: If the blue indicator is slow flashing/always on or cannot be connected, long press the reset button for 5 seconds to reset.

Android system operation is as follows:

1. Install APP.

Download and install JXLCAM APP, Android system in Google play search download. For easy installation, easily scan the following QR code installation.

Note: during installation, you need to open all permissions of the АРР, otherwise the АРР will not work properly.

Please select АPP to download.

2. Local mode.

Open your phone’s Wi-Fi list and connect to B/xCC…… After success, open the АРР page and click [АР] as shown below to watch the video.

Note: When there is no Wi-Fi in the environment, АР mode can be used for connection. The effective distance of this mode is no more than 10M, which can realize localized video viewing.

3. Remote mode.

1. First, confirm that there is available Wi-Fi signal near the device, turn the device on, the blue indicator light flashes quickly, and the device enters the state to be connected.
(Note: only support 2.4G band Wi-Fi signal)

2. Unable to connect successfully when power is low.

З. When connecting to the network, place the device as close to the router as possible. If the nearby available Wi-Fi signal is weak, the connection cannot be successful or the screen will be closed after successful connection.

4. Open the APP  and follow the steps below:

1. Click “+”
2. Click “AP add Camera”

Add Camera.

Please select 2.4Ghz Wi-Fi network.

The camera does not support 5.8ghz Wi-Fi.
Please connect the Wi-Fi of your mobile phone to a 2.4ghz Wi-Fi, router first.

3. Click « *» to connect to the local 2.4G Wi-Fi band, enter the password, and then go to the next step.

Connect the АР hotspot of the camera.

1. Please connect your mobile phone to the camera hotspot as shown below.

2. After successful connection, return to this APP to continue adding cameras.

4. Click “… ” to connect to the camera Wi-Fi hotspot and add the camera.

Log in – Wi-Fi Setting – Register.

5. Waiting for the connection

Connection succeeded.

6. Click “Next”

7. You can change the name or not, and then click “Next”

8. Check out the video preview on the home page

4. Description of icons and buttons on the home page.

 – Local mode

 – Add device

 – Number of device

 – refresh page

Camera BCCQ518…  – Device nickname

Online  – Network status

 – SD card playback file

 – Manually record files

5. Description of icons and buttons on the video page.

 – Settings

 – Alarm

 – Listen

 – Photo

 – Recording

 – Landscape switching

 – Sharpness switch

 – Switch left and right

 – Switch up and down

 – Indicator light ON/OFF

 – Infrared lamp ON/OFF

6. Storage card.

If you need to store video content, you need to install an SD card. (This machine supports loop video recording)

7. Camera settings.

 Name – Modify the device name

 User – Modify user name

 Alter – Motion detection sensitivity

Note: sensitivity and alarm interval can be set for motion detection. Click “ “.

 TF – Format TF card

 Share – Share the QR code to the person who needs to connect the device.

 Camera update

 – Restart the device

 – Factory data reset

NOTE:
1. When the device fails to configure the network, please check whether the router and Wi-Fi password are configured correctly (the device does not support Wi-Fi signals in the 5.8G band). After confirming that it is correct, you can press and hold the reset button until the device indicator flashes quickly, restore the factory settings, and reconfigure network.

2. When the software homepage shows that the device is offline, you can check whether the device is normally powered on, and click the refresh icon in the upper right corner to refresh.

3. The initial password of the device is  admin.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>