NOTHING BUT LEDS D236-90-5000-WH LED Disk Downlight Owner’s Manual
- June 12, 2024
- NOTHING BUT LEDS
Table of Contents
- NOTHING BUT LEDS D236-90-5000-WH LED Disk Downlight
- Product Information
- Product Usage Instructions
- Product Features
- Product Specifications
- Correlated Color Temperature (CCT)
- Dimensions
- Photomatric Data (SKU #: 1550458)
- Goniophotometer Test (SKU #: 1550459)
- Installation (SKU #: 1550458)
- Installation (SKU #: 1550459)
- Easy to Install in 2 ways
- Packaging
- Warranty
- Application
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
NOTHING BUT LEDS D236-90-5000-WH LED Disk Downlight
Product Information
The LED Disk Light is a high-quality lighting fixture that provides efficient and reliable illumination. It is available in two models with different wattage and lumen output:
- Model: D236-90-5000-WH, SKU#: 1550458, 15W, 1300Lm
- Model: D228-20W-90-5000-WH, SKU#: 1550459, 20W, 1600Lm
The LED Disk Light features a 6-inch or 8-inch white housing and has a color temperature of 5000K, providing cool white light. It operates at an input voltage of 120V and supports TRIAC dimming. The light is UL and ES certified for safety.
Specifications
Parameter | Value |
---|---|
Model # | D236-90-5000-WH (for SKU#: 1550458) |
Wattage | 15W |
Lumen | 1300Lm |
Color Temperature | 5000K (Cool White) |
Beam Angle | 90 degrees |
Housing Size | 6 Inch |
Housing Color | White |
IP Rating | Rang |
Warranty | Not specified |
Product Usage Instructions
Installation (SKU #: 1550458)
To install the LED Disk Light using surface mount:
- Ensure all electrical connections are in accordance with local and national electrical code standards.
- Disconnect the main power at the fuse or circuit breaker before installing or servicing the fixture.
- Follow the specific assembly and installation instructions provided for IC/AT fixture or retrofit assembly.
- For IC/AT fixtures, the light is intended for use in suspended ceilings with or without insulation.
- For retrofit installation, follow the provided instructions for both incandescent and LED housings.
Recommended Dimmers for LED Housings
The following dimmer models from Lutron and Leviton are recommended for use
with LED housings:
- Lutron: DVCL-153P-WH, MACL-153M-WH, S-600PR-WH, SPSLV-600-WH, DVLV-603P-IV, MALV-600-IV, MALV-600, DVW-603PGH-WH, 4X603,CTCL-153P, SLV-600P-WH, DVW-603P6H-WH, CT-603PG, NT-1000, S-603P, DV-600P, RA-6D
- Leviton: 6683, 6672, 6631, 6633-P, 1A2305, OB33K1
Please refer to the complete user manual for detailed instructions and additional information.
Our LED Disk Light makes it simple to switch your current illumination to energy-saving LED technology. Our LED Disk Lights provide adaptable lighting on standard line voltage while yet maintaining the excellent energy savings. Disk Light makes it simple to switch from traditionally recessed cans to a more modern, energy-efficient option. With the optional hardware mounting adapter, it may be easily installed on a junction box or retorted into an existing recessed can (not included). Our LED Disk Lights are ideal for general lighting in motels, hotels, commercial buildings and homes.
Product Features
- Quick, easy installation
- Dimmable and frosted lens
- Suitable for Damp Locations
- Available in 6″ and 8″
- Dry and Damp location rated
- DOB (driver on board) technology, Without capacitor, No buzz problem
- Suitable for Surface Mount and Retrofit
- UL and Energy Star approved
- Steel smooth trim with elegant design
- 5 Year Warranty
Product Specifications
SKU #| Model #| Watt| Lumens| CCT| Size|
Housing| Input Voltage| Dimming| Certifications
---|---|---|---|---|---|---|---|---|---
1550458| D236-90-5000-WH| 15W| 1300Lm| 5000K| 6 Inch| White| 120V| TRIAC| UL &
ES
1550459| D228-20W-90-5000-WH| 20W| 1600Lm| 5000K| 8 Inch| White| 120V| TRIAC|
UL & ES
Correlated Color Temperature (CCT)
Dimensions
Photomatric Data (SKU #: 1550458)
Spectral Distribution
ANSI Chromaticity Quadrangles Diagram
Goniophotometer Test (SKU #: 1550459)
Light Distribution Curve
Isolux Plot
Installation (SKU #: 1550458)
6″ LED DISK LIGHT INSTALLATION INSTRUCTIONS SURFACE MOUNT
Please read carefully and save these instructions, as you may need them at a
later date.
GENERAL: ALL ELECTRICAL CONNECTIONS MUST BE IN ACCORDANCE WITH LOCAL AND NATIONAL ELECTRICAL CODE (N.E.C.) STANDARDS. IF YOU ARE UNFAMILIAR WITH PROPER ELECTRICAL WIRING CONNECTIONS OBTAIN THE SERVICES OF A QUALIFIED ELECTRICIAN.
WARNING- RISK OF FIRE OR ELECTRIC SHOCK
- DO NOT MAKE OR ALTER ANY OPEN HOLES IN THE ENCLOSURE TO THE WIRING OR ELECTRICAL COMPONENTS DURING KIT INSTALLATION.
- TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR OTHER SHARP OBJECTS.
- SUITABLE FOR WET LOCATIONS
- SUITABLE FOR TYPE IC OR SUITABLE FOR TYPE NON-IC -USE ONLY IN OPEN LUMINAIRES
- THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS
ASSEMBLY AND INSTALLATION
This IC/AT fixture is intended for use in suspended ceilings (with or without
insulation). Shut off power before installation
- Prepare fixture for recessed installation.(FIG.1)
- Remove lens by twisting counter clockwise. (FIG.2)
- Connect supply wires to wires on fixture with wire nuts or push wires into Quick Connector. Connect white to white , black to black ,and copper wire to copper wire as grounding connection.(FIG.3)
- Arrange the wires into the back of the junction box.
- Align appropriate holes in the mounting fixture with the holes in the junction box. Using 2 of the longer screws (either #6 or #8 screws depending on the size of the holes in your junction box) attach the mounting fixture is flush with the ceiling. Do not over-tighten screws or fixture will not be light to ceiling. (FIG.4)
- Complete the installation by turn lens clockwise to lock. (FIG.5)
6″ LED DISK LIGHT INSTALLATION INSTRUCTIONS RETROFIT
ASSEMBLY AND INSTALLATION INCANDESCENT HOUSINGS
WARNING – RISK OF ELECTRIC SHOCK. DISCONNECT MAIN POWER AT FUSE OR CIRCUIT BREAKER BEFORE INSTALLING OR SERVICING THE FIXTURE.
-
Unscrew the WING NUT inside the CAN to detach the SOCKET BRACKET from the CAN. Disengage the SOCKET from the SOCKET BRACKET. (FIG. 2)
-
Thread the SOCKET ADAPTER into the SOCKET. (FIG. 3)
-
Place spring on mounting bracket and complete the installation by twisting the lens on the light. (FIG. 4)
-
If using TORSION SPRINGS, squeeze both TORSION SPRING arms together and insert into the TORSION SPRING SLOTS (or place spring on mounting bracket RECEIVER BRACKETS) of the CAN. (FIG. 5)
-
Tuck all wires into the CAN and carefully push the RETROFIT TRIM into CAN. (NOTE: To provide enough room in shallow cans, carefully position SOCKET ADAPTER and SOCKET adjacent to the long side of the LED DRIVER prior to inserting the RETROFIT TRIM into the CAN.) (FIG. 5)
LED HOUSINGS -
Plug the FEMALE CONNECTOR of the RETROFIT TRIM onto the MALE CONNECTOR of the HALO HOUSING. (FIG. 5)
-
If using TORSION SPRINGS, squeeze both TORSION SPRING arms together and insert into the TORSION SPRING SLOTS (or RECEIVER BRACKETS) of the CAN. (FIG. 5)
-
Tuck all wires into the CAN and carefully push the RETROFIT TRIM into CAN. (NOTE: To provide enough room in shallow cans, carefully position SOCKET ADAPTER and SOCKET adjacent to the long side of the LED DRIVER prior to inserting the RETROFIT TRIM into the CAN.) (FIG. 5)
DIMMING
Dimming performance may depend on the dimmer, the dimmer range adjustment
setting (for dimmers with brightness range adjustments), the wiring method,
and/or the number of LED modules installed onto the dimmer circuit. For dimmer
selection, Dimming control manufacturers revise their product open; for the
latest list of compatible dimmers please visit our website.
For best results, it is recommended to install a minimum of four LED modules
onto one dimmer.
Before turning on the LED lights, set dimmer position at maximum before
adjusting to a lower light level. Please follow the dimming control
manufacturer’s instruc?ons for the installation of all dimming controls.
Following is a list of recommended dimmers:
Brand | Lutron | Leviton |
---|---|---|
Model | DVCL-153P-WH | 6683 |
MACL-153M-WH | 6672 | |
S-600PR-WH | 6631 | |
SPSLV-600-WH | 6633-P | |
DVLV-603P-IV | 1A2305 | |
MALV-600-IV | OB33K1 | |
MALV-600 | ||
DVW-603PGH-WH | ||
4X603 | ||
CTCL-153P | ||
SLV-600P-WH | ||
DVW-603P6H-WH | ||
CT-603PG | ||
NT-1000 | ||
S-603P | ||
DV-600P | ||
RA-6D |
Installation (SKU #: 1550459)
8″ LED DISK LIGHT SURFACE MOUNT
WARNING – RISK OF ELECTRIC SHOCK. DISCONNECT MAIN POWER AT FUSE OR
CIRCUIT BREAKER BEFORE INSTALLING OR SERVICING THE FIXTURE
Please read carefully and save these instructions, as you may need them at a later date.
GENERAL: ALL ELECTRICAL CONNECTIONS MUST BE IN ACCORDANCE WITH LOCAL AND NATIONAL ELECTRICAL CODE (N.E.C.) STANDARDS. IF YOU ARE UNFAMILIAR WITH PROPER ELECTRICAL WIRING CONNECTIONS OBTAIN THE SERVICES OF A QUALIFIED ELECTRICIAN.
WARNING- RISK OF FIRE OR ELECTRIC SHOCK
-
D0 NOT MAKE OR ALTER ANY OPEN HOLES IN THE ENCLOSURE TO THE WIRING OR ELECTRICAL COMPONENTS DURING KIT INSTALLATION.
TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR OTHER SHARP OBJECTS. -
SUITABLE FOR DAMP LOCATIONS
-
SUITABLE FOR TYPE IC OR SUITABLE FOR TYPE NON-IC USE ONLY IN OPEN LUMINAIRES
THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS
ASSEMBLY AND INSTALLATION
This IC/AT fixture is intended for use in suspended ceilings(with or without
insulation). Shut off power
BEFORE INSTALLATION
Fix the bracket to the junction box with screws.(FIG.1)
Connect supply wires to wires on fixture with wire nuts or push wires into Quick Connector. Connect white to white , black to black, copper wire to copper wire as grounding connection.(FIG.2)
Arrange the wires into the back of the junction box.
-
Push the fixture back to the ceiling and make sure the secured in the bracket of junction box.(FIG.3)
-
Complete the installation by push the fixture into the ceiling.(FIG.4)
8″ LED DISK LIGHT RETROFIT
WARNING – RISK OF ELECTRIC SHOCK. DISCONNECT MAIN POWER AT FUSE OR
CIRCUIT BREAKER BEFORE INSTALLING OR SERVICING THE FIXTURE.
ASSEMBLY AND INSTALLATION INCANDESCENT HOUSINGS
- Unscrew the WING NUT inside the CAN to detach the SOCKET BRACKET from the CAN. Disengage the SOCKET from the SOCKET BRACKET.
- Thread the SOCKET ADAPTER into the SOCKET. (FIG. 2)
- Install the Spring Hooks as FIG.5 (For 6 Inch Can) or FIG.6 (For 8 Inch Can) by using M3*8 self tapping screws.
- Match the Male and Female Plugs and connect them firmly. (FIG. 3) Of using TORSION SPRINGS, squeeze both TORSION SPRING arms together and insert into the TORSION SPRING SLOTS (or place spring on mounting bracket RECEIVER BRACKETS) of the CAN.(FIG. 4)
- Tuck all wires into the CAN and carefully push the RETROFIT TRIM into CAN.
(NOTE: To provide enough room in shallow cans, carefully position SOCKET ADAPTER and SOCKET adjacent to the long side of the LED DRIVER prior to inserting the RETROFIT TRIM into the CAN.) (FIG. 4)
LED HOUSINGS
- Plug the FEMALE CONNECTOR of the RETROFIT TRIM onto the MALE CONNECTOR of the HALO HOUSING. (FIG. 2)
- Install the Spring Hooks as FIG.5 (For 6 Inch Can) or FIG.6 (For 8 Inch Can) by using M3*8 self tapping screws.
- Match the Male and Female Plugs and connect them firmly. (FIG. 3)
- If using TORSION SPRINGS, squeeze both TORSION SPRING arms together and insert into the TORSION SPRING SLOTS (or RECEIVER BRACKETS) of the CAN. (FIG. 4)
- Tuck all wires into the CAN and carefully push the RETROFIT TRIM into CAN.(NOTE: To provide enough room in shallow cans, carefully position SOCKET ADAPTER and SOCKET adjacent to the long side of the LED DRIVER prior to inserting the RETROFIT TRIM into the CAN.) (FIG. 4)
DIMMING
Dimming performance may depend on the dimmer, the dimmer range adjustment
setting (for dimmers with brightness range adjustments), the wiring method,
and/or the number of LED modules installed onto the dimmer circuit.
For dimmer selection, Dimming control manufacturers revise their product open;
for the latest list of compatible dimmers please visit our website.
For best results, it is recommended to install a minimum of four LED modules
onto one dimmer.
Before turning on the LED lights, set dimmer position at maximum before
adjusting to a lower light level.
Please follow the dimming control manufacturer’s instructions for the
installation of all dimming controls.
Easy to Install in 2 ways
Packaging
Size| Carton Size (Inches)| Pcs/Carton| Net Weight|
Gross Weight
---|---|---|---|---
6”| 15.94 x 13.38 x 8.346| 1 /6 / 12| 9.92 LBS| 11.02 LBS
8”| 18.11 x 10.32 x 10.62| 1 /4 / 8| 13.22 LBS| 14.33 LBS
Warranty
5 Years Warranty
Application
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>