NOTHING BUT LEDS BLT-CHB04B-100WBCA1-W50K LED Portable Light Instruction Manual

June 10, 2024
NOTHING BUT LEDS

NOTHING BLT-CHB04B-100WBCA1-W50K LED Portable Light

NOTHING BUT LEDS BLT-CHB04B-100WBCA1-W50K LED Portable Light
Instruction Manual-product

LED Portable Light

The LED Portable Light is a high-quality, UL and DLC certified lighting solution suitable for various environments. With a power output of 100W, it can provide up to 14500 lumens of cool white light (5000K CCT) with a beam angle of 106 degrees when the wings are open. It comes with a clear PC and aluminum housing that ensures durability and stability during use.

Product Features

  • Up to 145 Lumens per watt
  • Wattage: 100W
  • Housing: Yellow & Silver
  • 0-10V 0immable
  • Use 4 AAA rechargeable batteries on the lamp for emergency lighting (Ordinary uncharged batteries cannot be used).
  • Daisy-Chain Up to 15 lights
  • Input Voltage: 120V
  • The lamp cannot charge the battery when in used, need to take out and get batteries charged.
  • IP65 Rated
  • UL & DLC Listed
  • 5 Year warrantyNOTHING BUT LEDS BLT-CHB04B-100WBCA1-W50K LED Portable Light Instruction Manual-fig-1

Specifications

Parameter Value
SKU # / Model # 1560182 / BLT-CHB04B-100WBCA1-W50K
Lumen Color Temperature 5000K
Beam Angle 106 degrees (wings open), 355 degrees (wings closed)
Housing Clear PC + Aluminum
Input Voltage N/A
Dimming 70%
LED Brand / LED Type / LED QTY Lumileds / PC / N/A
Warranty 5 years

NOTHING BUT LEDS BLT-CHB04B-100WBCA1-W50K LED Portable Light Instruction
Manual-fig-2

Installation and Usage

The LED Portable Light can be installed using one of six different methods: Hook Mount, Industry Hook Mount, Round Pipe Mount, Magnet Mount, 1/4 NPT Stem Mount, 5/8 NPT Stem Mount. Please choose the most suitable installation method for your needs.

Hook Mount

  1. Screw the hook into the lamp base.
  2. Hang the lamp on the ceiling hook.

Industry Hook Mount

  1. Screw the hook into the lamp base.
  2. Hang the lamp on the industry hook.

Round Pipe Mount

  1. Screw the round pipe into the lamp base.
  2. Mount the lamp onto a round pipe.

Magnet Mount

  1. Attach the magnet to a metal surface.
  2. Place the lamp on the magnet.

1/4 NPT Stem Mount

  1. Put the 1/4 NPT Stem into a threaded round pole with a diameter of 1/4 inch.
  2. Mount the lamp onto the 1/4 NPT Stem.

5/8 NPT Stem Mount

  1. Put the 5/8 NPT Stem into a threaded round pole with a diameter of 5/8 inch.
  2. Mount the lamp onto the 5/8 NPT Stem.

Before using the LED Portable Light, please make sure to check for any damage that may have occurred during shipping. If there is any damage, please contact the manufacturer immediately. Also, please read the installation instructions carefully to ensure that all accessories are complete.

Battery Installation

If using batteries, follow these steps:

  1. Open the battery cover with a screwdriver and remove the silicone sleeve.
  2. Install four AA rechargeable batteries.
  3. Install the silicone sleeve and battery cover successively.

Note that this product requires Four AA rechargeable batteries, LR03 1.3V batteries. The battery may discharge completely after 12 months even if not in use.

Cautions

  • Do not use an electric generator to test the LED lamp.
  • Proper earth grounding is required to ensure safety.

Notice

  • Please wear gloves to avoid injury before installation.

Our Portable work Light is the newest and the unique product of 2023. Work Light delivers up to 15000 lumens and can be installed by daisy-chain up to 15 lights in a row. Our light comes with o360 Degree angle with Portable Folding Wings Light, thus enabling full rotation forward and backward, making it extremely durable even in harsh environments. Our Portable light can be used with 4 AAA rechargeable batieries on the lamp for emergency lighting. It’s great for construction site and can be used as perma-nent lighting in an industrial indoor and outdoor environment.

Correlated Color Temperature (CCT)

Optional Accessories

Dimension

NOTHING BUT LEDS BLT-CHB04B-100WBCA1-W50K LED Portable Light
Instruction Manual-fig-5

Photometric Data (SKU: 151793)

Luminaire Property

Luminaire Manufacturer:

  • Voltage: 120.8 V
  • Current: 0.828 A
  • Power: 99.06W
  • Power Factor: 0.990

Photometric Results

  • IES Classification: Type I
  • Total Rated Lamp Lumens: 14681.5 lm
  • Efficiency: 100%
  • Upward Ratio: 51 %
  • Central Intensity: 10.7 cd
  • Pos of Max. Intensity: H225 V91
  • Longitudinal Classification: Very Long
  • Measurement Flux: 14681.5 lm
  • Downward Ratio: 49%
  • Luminaire Efficacy Rating (LER): 148.26
  • Max. Intensity: 1949.17 cd

Distribution Diagram

NOTHING BUT LEDS BLT-CHB04B-100WBCA1-W50K LED
Portable Light Instruction Manual-fig-6

Installation

Cautions:

  1. Can not use the electric generator to test the LED lamp.
  2. Please abide by related country, regional and local law and regulations when install this fixture.
  3. Please turn off the power before installation or maintenance.
  4. Proper earth grounding is required to ensure safety.

Notice:

  1. To avoid possibility of electrical shock or fire, the installation personnel must have professional electric knowledge.
  2. Please wear gloves to avoid injury before installation.
  3. If any smoke or spark of the wire happened, please turn off the power immediately and notify relevant personnel.

Attention:

  1. Please check if there is any damage during shipping. If so, please contact manufacturer timely.
  2. Please read the installation instruction carefully to check whether all the accessories are complete. After confirmation, then install the fixture according to installation steps.
Installation Steps

NOTHING BUT LEDS BLT-CHB04B-100WBCA1-W50K LED
Portable Light Instruction Manual-fig-7

6 Installation Methods: Hook Mount, Industry Hook Mount, Round Pipe Mount, Magnet Mount, 1/4 NPT Stem Mount, 5/8 NPT Stem Mount (Please choose the most suitable installation method for the purchased products as per your needs.)

  • Hook Mount:
1. Screw the hook into lamp base. (Figure 1).
2. Hang on the lamp on the ceiling hook. (Figure 2).
3. Connect the plug and socket, then finish.![NOTHING BUT LEDS BLT-CHB04B-100WBCA1-W50K LED Portable Light Instruction Manual-fig-8](https://manuals.plus/wp-content/uploads/2023/04/NOTHING-BUT-LEDS-BLT-CHB04B-100WBCA1-W50K-LED-Portable-Light-Instruction-Manual-fig-8.jpg)
  • Industry Hook Mount:
1. Screw the hook into lamp base. (Figure 3).
2. Clip the fixture on the round tube and tighten the screw. (Figure 4)
3. Connect the plug and socket, then finish.![NOTHING BUT LEDS BLT-CHB04B-100WBCA1-W50K LED Portable Light Instruction Manual-fig-9](https://manuals.plus/wp-content/uploads/2023/04/NOTHING-BUT-LEDS-BLT-CHB04B-100WBCA1-W50K-LED-Portable-Light-Instruction-Manual-fig-9.jpg)
  • Round Pipe Mount:
1. Screw the round pipe into lamp base. (Figure 5)
2. Insert the fixture into a round pipe with diameter 20-25mm, the round pole must have a hole with diameter 5.5-7.Smm(Figure6) and then tighten butterfly screw(Figure7)(Figure8), please make sure the butterfly screw was completely inserted into the hole on the round pole!
3. Connect the plug and socket, then finish.![NOTHING BUT LEDS BLT-CHB04B-100WBCA1-W50K LED Portable Light Instruction Manual-fig-10](https://manuals.plus/wp-content/uploads/2023/04/NOTHING-BUT-LEDS-BLT-CHB04B-100WBCA1-W50K-LED-Portable-Light-Instruction-Manual-fig-10.jpg)
  • Magnet Mount:
1. Tighten the magnet bracket on the lamp base with butterfly screw. (Figure 9)(Figure10).
2. Attach the fixture to the iron plate(Figurel 1 ). Pay attention to the fragile magnet.
3. Connect the plug and socket, then finish.![NOTHING BUT LEDS BLT-CHB04B-100WBCA1-W50K LED Portable Light Instruction Manual-fig-11](https://manuals.plus/wp-content/uploads/2023/04/NOTHING-BUT-LEDS-BLT-CHB04B-100WBCA1-W50K-LED-Portable-Light-Instruction-Manual-fig-11.jpg)
  • 1/4 NPT Stem Mount:
1. Only suitable for threaded round pole with the diameter 1/4inch. Put the 1/4 NPT Stem into the round pole (Figure 12), then tighten the 1/4 NPT Stem by screwing the butterfly screw.
2. Connect the fixture to the 1 /4 NPT Stem; (Figure 13, 14) Finally connect the plug to the socket.![NOTHING BUT LEDS BLT-CHB04B-100WBCA1-W50K LED Portable Light Instruction Manual-fig-12](https://manuals.plus/wp-content/uploads/2023/04/NOTHING-BUT-LEDS-BLT-CHB04B-100WBCA1-W50K-LED-Portable-Light-Instruction-Manual-fig-12.jpg)
  • 5/8 NPT Stem Mount:
1. Only suitable for threaded round pole with the diameter 5/8inch. Put the 5/8 NPT Stem into the round pole (Figure 15), then tighten the 5/8 NPT Stem by screwing the butterfly screw (Figure 16);
2. Connect the fixture to the 5/8 NPT Stem;
3. Finally connect the plug to the socket.![NOTHING BUT LEDS BLT-CHB04B-100WBCA1-W50K LED Portable Light Instruction Manual-fig-14](https://manuals.plus/wp-content/uploads/2023/04/NOTHING-BUT-LEDS-BLT-CHB04B-100WBCA1-W50K-LED-Portable-Light-Instruction-Manual-fig-14.jpg)

Warning

MIN 75°C SUPPLY CONDUCTOR THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.NOTHING BUT LEDS BLT-
CHB04B-100WBCA1-W50K LED Portable Light Instruction Manual-
fig-15

Installation Steps
  • Step 1: Open the battery cover with a screwdriver and remove the silicone sleeve,
    See Figure 1. Step 2: Remove the silicone sleeve, see Figure 2.
    Step 3: Install Four AA rechargeable batteries, see Figure 3.
    Step 4: Install the silicone sleeve and battery cover successively, see Figure 4

Note:

  1. This product needs to use with Four AA rechargeable batteries,LR03 1.3V batteries.
  2. Do not use old batteries or mix up with different types of batteries.
  3. The battery may discharge completely after 12 months even if not in use.

Notice For User

  • Please turn off power before install or change assembly parts.
  • The input voltage and luminaire should be matched, after connecting the power line, Please make sure the wiring section is insulated.
  • No-professionals, must not install and disassemble the luminaire.

TROUBLE SHOOTINGS

NOTHING BUT LEDS BLT-CHB04B-100WBCA1-W50K LED Portable
Light Instruction Manual-fig-16

Packaging

NOTHING BUT LEDS BLT-CHB04B-100WBCA1-W50K LED Portable Light
Instruction Manual-fig-17

Application Image

NOTHING BUT LEDS BLT-CHB04B-100WBCA1-W50K LED Portable
Light Instruction Manual-fig-18

Warranty

5 Year Warranty

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals