XRAY RX8E-23 Luxury Electric On Road Car Instructions
- June 12, 2024
- XRAY
Table of Contents
XRAY RX8E-23 Luxury Electric On Road Car
Product Information
The product is a racing car setup sheet that provides information on various components and settings of the car. It includes details about the track, front and rear settings, aerodynamics, traction, gearing, shocks, tires, electronics, body and wing, suspension, steering, and other accessories.
Product Usage Instructions
-
Set-Up Sheet:
Fill in the required information such as race name, date, and track condition. -
Basic Set-Up:
Adjust the front eccenter and aero disk settings based on your preference (Yes/No). Set the bump steer shim to 0mm. -
Track:
Select the track type (Smooth/Technical/Low). -
Gearing:
Choose the appropriate pinion and spur gear ratios based on your requirements. -
Shocks:
Adjust shock settings such as oil viscosity (cSt), number of holes (2/3), and other parameters like spring, rebound, foam inserts, and pistons. -
Tires:
Specify the tire manufacturer, shore hardness (degr.), diameter, and minimum wear. -
Electronics:
Select the motor and speedo type. Choose the appropriate battery type for your car’s electronics. -
Body and Wing:
Set the height, left and right positions of the body and wing. -
Suspension:
Adjust various suspension components like steer. block, shim, upper arm, roll center, shock shim, upper shock position, front lower arm, body mount position, and body holder position. -
Steering:
Set the toe-out and toe-in measurements using the provided gauge. Adjust outer Ackermann position and upper arm shims. -
Other Components:
Configure components like flex screw, camber, shock plate (steel/graphite), suspension holders, roll center shim, camber link location, comments, front track width, rear bumper window (cut/no-cut), and front balance.
Note: Refer to the user manual for detailed instructions on each component and its adjustment.
OVERVIEW
SET-UP SHEET
