MGC RAX-LCD-LITE Remote LCD Annunciator Owner’s Manual
- June 12, 2024
- MGC
Table of Contents
MGC RAX-LCD-LITE Remote LCD Annunciator
Product Information:
The RAX-LCD-LITE is a remote LCD annunciator that mimics the main Fire Alarm Panel display at a remote location. It features a large 4-line x 20-character back-lit alphanumeric LCD display. The annunciator is equipped with a simple menu system, including a directional keypad and switches for Enter, Menu, Cancel, and Info. It is available in five different enclosure types: BB-1001, BB-1002, BB-1003, BB-1008, and BB-1012, which can accommodate 1, 2, 3, 8, and 12 chassis respectively.
The product requires a 24 VDC power supply from either the Fire Alarm Control
Panel or a previous annunciator. It also utilizes RS-485 input and output for
communication with the fire alarm system or other annunciators. The power
consumption of the
RAX-LCD-LITE is 65 mA in normal operating voltage and 80 mA in standby alarm
mode.
For ordering the product, the model name is RAX-LCD-LITE. It is described as a remote annunciator with a large LCD display.
Product Usage Instructions
- Choose the appropriate enclosure type (BB-1001, BB-1002, BB-1003, BB-1008, or BB-1012) based on the number of chassis required.
- Connect a 24 VDC power supply from either the Fire Alarm Control Panel or a previous annunciator to the designated power inputs on the RAX-LCD-LITE.
- Connect the RS-485 input and output wires from the fire alarm system or previous annunciator to the corresponding RS-485 terminals on the RAX-LCD-LITE. Use twisted shielded pair cables for RS-485 connections.
- If multiple annunciators are being used, connect the RS-485 output of one annunciator to the RS-485 input of the next annunciator using twisted shielded pair cables.
- Ensure the power supply is within the normal operating voltage range to avoid excessive power consumption.
- Use the directional keypad and switches (Enter, Menu, Cancel, and Info) on the RAX-LCD-LITE to navigate the menu system and access different functions and information on the LCD display.
Please refer to the technical literature for complete and accurate technical information regarding performance, installation, testing, and certification of the RAX-LCD-LITE. Note that the information provided in this document is subject to change without notice.
Description
The RAX-LCD-LITE display mimics the main Fire Alarm Panel display at a remote location. It is equipped with a large 4-line x 20-character back-lit alphanumeric LCD display that uses a simple menu system complete with a directional keypad and switches for Enter, Menu, Cancel and Info. There are five types of enclosure available: the BB-1001, BB-1002, BB-1003, BB-1008, and BB-1012 which can take 1,2,3,8,12 chassis respectively
Power Consumption
| Normal Operating Voltage | AMPS |
|---|---|
| Stand by | 65 mA |
| Alarm | 80 mA |
Features
- Large 4-line x 20-character back-lit alphanumeric LCD display
- 24 VDC Power Limited Nominal Voltage
- Sealed membrane-like buttons and LED indicators.
- LCD display that uses a simple menu system
- Directional keypad and switches for Enter, Menu, Cancel and Info.
Wiring Diagram
Ordering Information
| Model | Description |
|---|---|
| RAX-LCD-LITE | Remote Annunciator with Large LCD Display |
Canada
25 Interchange Way Vaughan, ON L4K 5W3 Telephone:
905-660-4655 | Fax:
905-660-4113
U.S.A.
4575 Witmer Industrial Estates Niagara Falls, NY 14305 Toll Free:
888-660-4655 | Fax Toll Free:
888-660-4113
www.mircom.com
THIS INFORMATION IS FOR MARKETING PURPOSES ONLY AND NOT INTENDED TO
DESCRIBE THE PRODUCTS TECHNICALLY.
For complete and accurate technical information relating to performance,
installation, testing and certification, refer to technical literature. This
document contains intellectual property of Mircom. The information is subject
to change by Mircom without notice. Mircom does not represent or warrant
correctness or completeness.
CATALOG NUMBER: 5350
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>