legrand LCAN 6ATC2PGY Evolution Series 6 Poke Thru Devices

Product Information: EvolutionTM Series 6 Poke-Thru Devices

The EvolutionTM Series 6 Poke-Thru Devices are designed for both retrofit and new construction applications. These devices provide convenient access to power, communications, and audio/video services that are recessed below floor level, ensuring maximum device protection. With three gangs of capacity, you can easily configure services according to your space requirements, allowing placement in any location within the unit.

The low-profile durable metal covers are available in seven finishes, making it easy to match any space. The covers feature sliding doors that allow cables to neatly egress from the unit, providing cable protection while reducing tripping hazards.

The Evolution Series 6 Poke-Thru Devices are perfect for meeting and training rooms, classrooms, healthcare facilities, or commercial buildings with open- space architecture.

Features & Benefits:
Easy installation without the need for additional fasteners or a second installer

Vertical Markets

• Meeting and training rooms
• Classrooms
• Healthcare facilities
• Commercial buildings with open-space architecture

Compliance

• cULus Listed, Metallic Outlet Box File Number E2961. Guide QCIT.
• cULus Listed Nonmetallic Outlet Boxes & Fittings Classified for
• Fire Resistance: File R8209, Guide CEYY.

Cabling Specifications

The copper cross-sectional area determines the wire fill capacity of the Evolution Series 6 Poke-Thru Devices. These devices are UL Classified to U.S. and Canadian safety standards and have been tested under fire conditions to maintain the fire-rating of the floor assembly.

Note: When using conductor sizes other than those listed, ensure that the aggregate cross-sectional area of the copper conductors  does not exceed the listed cross-sectional area.Copper

Cross-Sectional Area of Commonly Used Conductors:

Flooring Specifications

CAUTION: These devices are suitable for 1-, 1 1/2-, and 2-hour  rated floor assemblies as described in the UL Fire Resistance directory for each service.

For more information or to configure your own EvolutionTM Series  Poke-Thru Device, visit our online configurator at: www.legrand.us/wiremold/evolution.

WIREMOLD®
EvolutionTM Series 6″ Poke-Thru Devices

The interior of the EvolutionTM Series 6″ Poke-Thru Device.

Evolution Series ­ The Most Innovative Poke-Thru Devices in the Market
Designed for retrofit and new construction, Evolution Series 6″ PokeThru devices provide convenient access to power, communications, and audio/video services recessed below floor level – providing maximum device protection. With three gangs of capacity that allow you to configure services for the needs of your space, services can be placed in any location within the unit.
The low-profile durable metal covers are available in seven finishes, designed to match any space. The cover also features sliding doors that allow cables to neatly egress from the unit, protecting cables while reducing tripping hazards.
Evolution Series 6″ Poke-Thru devices are the perfect fit for meeting and training rooms, classrooms, healthcare facilities or commercial buildings with open-space architecture

Features & Benefits

Recessed devices. Three (3) compartments for power, communications, and/or A/V devices, all recessed 4″ (102mm) below the floor level, providing maximum protection and device longevity.
· Die-cast aluminum cover assemblies. The Evolution Series poke-thru design includes all metal die-cast aluminum cover assemblies, available in powder coated finishes of black, gray, bronze, and aluminum, as well as a brushed aluminum, satin brass plated and satin nickel plated finishes.
· A/V compatible design. The 6AT Series devices are designed to work with with Legrand’s AVIP devices. Also compatible with most A/V manufacturers devices including their 1-gang decorator style design.
· Flush tile version cover assemblies. A flush style cover for tile applications allows the Evolution Series Poke-Thru Devices to be adjusted to the same level as the top surface of the floor covering. The tile cover is designed to be used in higher traffic applications, where a low profile is a must.
· Auto-close egress doors. Egress doors lock in position when slid open and automatically close around cables, reducing the egress opening to the smallest size possible.
· Improved hinge design. Provides greater durability while creating a more fluid, intuitive, opening and closing motion.
· “Step-on-it” installation. Quick, easy installation without

the need for additional fasteners or a second installer.
· Added furniture feed capacity. The 6ATCFF Series Poke-Thru Device offers the largest dual service furniture feed capability on the market.
· Pre-pour sleeve. Creates a cast-in-place core hole that allows the contractor to position poke-thru units before concrete is poured. Eliminates the cost and labor of coring the opening.
· TopGuardTM Protection. All Evolution Series Poke-Thru Devices, like every Wiremold Poke-Thru Device, meet and exceed UL scrub water exclusion requirements for tile, carpet, and wood covered floors.
· Meets ADA Accessibility Guidelines. Wide trim flange is designed to meet the ADA Accessibility Guidelines as it pertains to ADA Standard 4.5 which addresses changes in floor and ground surface levels. The poke-thru trim flanges are beveled so the slope is no greater than 1:2 ratio.
· Suitable for use in air handling spaces. In accordance with Sec 300-22(C) of the National Electrical Code.
· UL Listed and UL Fire Classified to U.S. and Canadian safety standards. UL Fire rated for up to 2-hour rated floors maintains the fire classification of the floor.

Vertical Markets

· Commercial · Hospitality

· Education · Entertainment

· Healthcare · Retail

Download this product’s PEP ecopasport® environmental product declaration at www.legrand.us/resources-and-downloads. This declaration conforms with ISO 14025 and 14040 and is in alignment with EN 15804.

Compliance
cULus Listed, Metallic Outlet Box File Number E2961. Guide QCIT. cULus Listed Nonmetallic Outlet Boxes & Fittings Classified for Fire Resistance: File R8209, Guide CEYY.
CS3080 — Updated September 2022 — For latest specs visit www.legrand.us/wiremold

For more information or to configure your own EvolutionTM Series Poke-Thru Device, visit our online configurator at:
www.legrand.us/wiremold/evolution.

WIREMOLD®
EvolutionTM Series 6″ Poke-Thru Devices

Cabling Specifications

Copper Cross Section: The copper cross-sectional area determines the amount of wire fill capacity in a poke-thru device. Unlike other wire and cable management systems that utilize wire fill capacity, a poke-thru device is UL tested under fire conditions to determine the maximum amount of copper conductors that will pass through a poke-thru device, while maintaining the fire-rating of the floor assembly. All Legrand Poke-Thru Devices are UL Classified to U.S. and Canadian safety standards.

6AT COPPER CROSS-SECTION

Max Copper X-Section
Max # Conductors

OUTER CHANNELS
0.0154 sq. in. (9.9mm2)
(3) 12 AWG

CENTER CHANNEL
0.0387 sq. in. (24.97 mm2)
(12) 14 AWG

6ATCFF COPPER CROSS-SECTION ­ FURNITURE FEED POKE-THRU DEVICES

POWER DATA CHANNEL

CHANNEL

(CENTER)

Max Copper X-Section

0.0815 sq. in. (52.6mm2)

0.0686 sq. in. (44.3 mm2)

DATA CHANNEL (OUTSIDE)
0.0187 sq. in. (12.1 mm2)

Max # Conductors

(10) 10 AWG

(22) Cat. 6a

(5) Cat. 6a

NOTE: When using conductor sizes other than listed above, the aggregate cross- sectional area of the copper conductors shall not exceed the cross-sectional area listed.

Copper Cross-Sectional Area of

Commonly Used Conductors

Size

Solid

24

0.00032 sq. in. (.206mm2)

23

0.00040 sq. in. (.258mm2)

22

0.00050 sq. in. (.322mm2)

14

0.00323 sq. in. (2.083mm2)

12

0.00512 sq. in. (3.303mm2)

10

0.00815 sq. in. (5.258mm2)

8

0.01296 sq. in. (8.361mm2)

NOTE: Use above values for solid or stranded conductors.

Flooring Specifications

6AT CORE HOLE SIZES

FLOOR TYPE
Covered Floors (Carpet, Tile or Wood)

CORE SIZE (Min.)
6″ (152mm)

Bare Concrete or Terrazzo

6″ (152mm)

CORE SIZE (Max.) 6 1/8″ (154mm)
6 1/8″ (154mm)

CAUTION: These devices are suitable for 1-, 1 1/2-, and 2-hour rated floor assemblies as described in the UL Fire Resistance directory for each service.
These devices meet all UL scrub water requirements, but are not suitable for wet or damp locations, or other areas subject to saturation with water or other liquids, such as commercial kitchens.

Floor Coverings: UL Certification:

The poke-thru device is fire rated for concrete floor coverings. For floor coverings greater than 1″ (25mm), consult factory.
To view the UL certification, please visit www.UL.com/Database. Enter “Wiremold” as the company name and “CEYY” as the UL Category Code.

Poke-thru devices and abandonment fittings are for use with 1-, 1 1/2-, or 2-hour rated unprotected reinforced concrete floor and 1-, 1 1/2- or 2-hour rated floors employing unprotected steel floor units and concrete topping (D900-Series Designs), or concrete floors with suspended ceilings. (Fire resistive designs with suspended ceilings should have provisions for accessibility in the ceiling area below the poke-thru fittings.)

The assembled Poke-Thru stem and service fitting or the abandonment fittings will not reduce the ratings of the floor assembly when the thickness and type of concrete (required for the specific rating) are within the specified limits and the fittings are installed as specified:

1. Spacing

­ Minimum of 2′ (610mm) OC and not more than one unit per 65 square feet (6 square meters) of floor area in each span.

2. Concrete ­ Minimum thickness of structural concrete topping of 2 1/4″ (57mm) over metal deck or a minimum 3″ thick reinforced concrete slab. Unit weight of concrete to be 110 to 155 pcf.

3. Installation ­ Mounted in a 6″ (152mm) diameter core drilled hole in concrete per installation instructions accompanying the fittings or abandonment fittings. For use with power circuits, data and/or telephone cables as tabulated below.

NOTE:

The material that is used in Wiremold® poke-thru devices is not listed under the directory for Fire Stopping Material because the pokethru device is UL Classified as “Outlet Boxes and Fittings Classified For Fire Resistance (CEYY)”. The pass/fail criteria comes from UL263. The pass criteria is that the poke-thru unit cannot exceed 325° F. above ambient before the concrete slab (or deck) reaches this same temperature. Some poke-thru devices are tested for 2 hours while others are tested for 4 hours. The intumescent material has never been tested as a fire-stopping material as a stand-alone device. This material is designed to work as a unit with the entire poke-thru device.

CS3080 — Updated September 2022 — For latest specs visit www.legrand.us/wiremold

2

WIREMOLD®
EvolutionTM Series 6″ Poke-Thru Devices

Evolution Series 6″ Poke-Thru Devices Ordering Information

Catalog No./Item
Powder Coat Finishes 6ATC2PBK 6ATC2PBZ 6ATC2PGY

Durable Finishes

6ATC2PAA

16 1/4″

6ATC2PSB

(412mm)

6ATC2PSN

NOTE: UL Fire Classified for up to 2-hour rated floors.
NOTE: Receptacles can be wired as a standard or isolated ground device.

Description/Specifications
Recessed Prewired Surface Style Poke-Thru Assembly ­ · Designed to be installed in a concrete floor which has access in the ceiling of the
floor below for running power, data and A/V services. · Poke-thru device installs into a 6″ (152mm) to a 6 1/8″ (155mm) diameter hole. · The unit comes complete with a surface style cover and two (2) prewired, pre-
installed duplex receptacles that are recessed 4″ (102mm) below the floor surface level. · Surface style cover is an aluminum cover that is designed to sit on top of finished floor surfaces, such as carpet, tile, wood, polished concrete or terrazzo · Covers are available in six finishes ­ Three powder coat finishes: black (BK), gray (GY), and bronze (BZ) ­ Three durable finishes: brushed aluminum (AA), satin brass plated (SB), and
satin nickel plated (SN)
Country of Origin: USA
INCLUDED For Side Compartments: · Two (2) proprietary Tamper-Resistant 20A Duplex Receptacles installed For Center Compartment: · One (1) 6ACT8A Mounting Plate For Bottom Feed Compartment: · One (1) 5BLH 1/2-Gang Blank Housing* · One (1) 1PTHA 1-Gang Pass-Through Housing Assembly · One (1) 575CHA 1/2-Gang 3/4″ Conduit Housing Assembly**

7 1/4″ (184mm)
3 1/4″ (83mm)

4″ (102mm)

5BLH

2 1/4″ (58mm)
16 1/4″ (412mm)

1PTHA

575CHA

20A Receptacles

Bottom View

3/16″ (4.8mm)
8° Bevel

Top View

Surface Style Cover

NOTE: For more information on Device Plates and Bottom Feed Plates and on the additional options available, see the Device Plates and Bottom Feed Plates sections found later in this document.

• Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.
  ** Also includes junction box attached to the 3/4″ conduit.

CS3080 — Updated September 2022 — For latest specs visit www.legrand.us/wiremold

3

WIREMOLD®
EvolutionTM Series 6″ Poke-Thru Devices

Evolution Series 6″ Poke-Thru Devices Ordering Information

Catalog No./Item Powder Coat Finishes 6ATC2PCRBK 6ATC2PCRBZ 6ATC2PCRGY
Durable Finishes 6ATC2PCRAA 16 1/4″ 6ATC2PCRSB (412mm) 6ATC2PCRSN
NOTE: UL Fire Classified for up to 2-hour rated floors.
NOTE: Receptacles can be wired as a standard or isolated ground device.

Description/Specifications

Recessed Prewired Surface Style Poke-Thru Assembly ­
· Designed to be installed in a concrete floor which has access in the ceiling of the floor below for running power, data and A/V services.
· Poke-thru device installs into a 6″ (152mm) to a 6 1/8″ (155mm) diameter hole.
· The unit comes complete with a surface style cover and one (1) prewired, preinstalled duplex receptacle and one 20A proprietary duplex receptacle marked with a permanent “Controlled Receptacle” marking that are recessed 4″ (102mm) below the floor surface level.
· Surface style cover is an aluminum cover that is designed to sit on top of finished floor surfaces, such as carpet, tile, wood, polished concrete or terrazzo
· Covers are available in six finishes ­ Three powder coat finishes: black (BK), gray (GY), and bronze (BZ) ­ Three durable finishes: brushed aluminum (AA), satin brass plated (SB), and satin nickel plated (SN)
Country of Origin: USA
INCLUDED For Side Compartments: · One (1) proprietary Tamper-Resistant 20A Duplex Receptacle · One (1) proprietary Tamper-Resistant 20A Duplex Receptacle marked
with a permanent “Controlled Receptacle” For Center Compartment: · One (1) 6ACT8A Mounting Plate For Bottom Feed Compartment: · One (1) 5BLH 1/2-Gang Blank Housing* · One (1) 1PTHA 1-Gang Pass-Through Housing Assembly · One (1) 575CHA 1/2-Gang 3/4″ Conduit Housing Assembly**

7 1/4″ (184mm)

5BLH

1PTHA

575CHA

20A Receptacles

4″ (102mm)

3 1/4″ (83mm)

2 1/4″ (58mm)
16 1/4″ (412mm)

Bottom View

3/16″ (4.8mm)
8° Bevel

Top View

Surface Style Cover

NOTE: For more information on Device Plates and Bottom Feed Plates and on the additional options available, see the Device Plates and Bottom Feed Plates sections found later in this document.

• Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.
  ** Also includes junction box attached to the 3/4″ conduit.

CS3080 — Updated September 2022 — For latest specs visit www.legrand.us/wiremold

4

WIREMOLD®
EvolutionTM Series 6″ Poke-Thru Devices

Evolution Series 6″ Poke-Thru Devices Ordering Information

Catalog No./Item
Powder Coat Finishes 6AT2PBK 6AT2PBZ 6AT2PGY

Durable Finishes

6AT2PAA 6AT2PSB

16 1/4″ (412mm)

6AT2PSN

NOTE: UL Fire Classified for up to 2-hour rated floors.
NOTE: Receptacles can be wired as a standard or isolated ground device.
NOTE: Includes one (1) 6TS Tile Shim.

Description/Specifications
Recessed Prewired Flush Style Poke-Thru Assembly ­ · Designed to be installed in a concrete floor which has access in the ceiling of the
floor below for running power, data and A/V services. · Poke-Thru device installs into a 6″ (152mm) to a 6 1/8″ (155mm) diameter hole. · The unit comes complete with a flush style cover and two (2) prewired, pre-
installed duplex receptacles that are recessed 4″ (102mm) below the floor surface level. · The flush style cover is an aluminum cover that is designed to sit flush with finished floor coverings such as: carpet, tile, or wood. · Covers are available in six finishes ­ Three powder coat finishes: black (BK), gray (GY), and bronze (BZ) ­ Three durable finishes: brushed aluminum (AA), satin brass plated (SB), and
satin nickel plated (SN)
Country of Origin: USA
INCLUDED For Side Compartments: · Two (2) proprietary Tamper-Resistant 20A Duplex Receptacles installed
For Center Compartment: · One (1) 6ACT8A Mounting Plate For Bottom Feed Compartment: · One (1) 5BLH 1/2-Gang Blank Housing* · One (1) 1PTHA 1-Gang Pass-Through Housing Assembly · One (1) 575CHA 1/2-Gang 3/4″ Conduit Housing Assembly**

7 1/4″ (184mm)

5BLH

1PTHA

575CHA

20A Receptacles

4″ (102mm)

3 1/4″ (83mm)

2 1/4″ (58mm)
16 1/4″ (412mm)

Bottom View

Top View
3/16″ (4.8mm)
No Bevel

Flush Style Cover

NOTE: For more information on Device Plates and Bottom Feed Plates and on the additional options available, see the Device Plates and Bottom Feed Plates sections found later in this document.

• Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.
  ** Also includes junction box attached to the 3/4″ conduit.

CS3080 — Updated September 2022 — For latest specs visit www.legrand.us/wiremold

5

WIREMOLD®
EvolutionTM Series 6″ Poke-Thru Devices

Evolution Series 6″ Poke-Thru Devices Ordering Information

Catalog No./Item
Powder Coat Finishes 6AT2PCRBK 6AT2PCRBZ 6AT2PCRGY

Durable Finishes 6AT2PCRAA 6AT2PCRSB 6AT2PCRSN

16 1/4″ (412mm)

NOTE: UL Fire Classified for up to 2-hour rated floors.
NOTE: Receptacles can be wired as a standard or isolated ground device.
NOTE: Includes one (1) 6TS Tile Shim.

Description/Specifications
Recessed Prewired Flush Style Poke-Thru Assembly ­
· Designed to be installed in a concrete floor which has access in the ceiling of the floor below for running power, data and A/V services.
· Poke-Thru device installs into a 6″ (152mm) to a 6 1/8″ (155mm) diameter hole.
· The unit comes complete with a flush style cover and one (1) prewired, preinstalled duplex receptacle and one 20A proprietary duplex receptacle marked with a permanent “Controlled Receptacle” marking that are recessed 4″ (102mm) below the floor surface level.
· The flush style cover is an aluminum cover that is designed to sit flush with finished floor coverings such as: carpet, tile, or wood.
· Covers are available in six finishes ­ Three powder coat finishes: black (BK), gray (GY), and bronze (BZ) ­ Three durable finishes: brushed aluminum (AA), satin brass plated (SB), and satin nickel plated (SN)
Country of Origin: USA
INCLUDED For Side Compartments: · One (1) proprietary Tamper-Resistant 20A Duplex Receptacle · One (1) proprietary Tamper-Resistant 20A Duplex Receptacle marked
with a permanent “Controlled Receptacle” For Center Compartment: · One (1) 6ACT8A Mounting Plate For Bottom Feed Compartment: · One (1) 5BLH 1/2-Gang Blank Housing* · One (1) 1PTHA 1-Gang Pass-Through Housing Assembly · One (1) 575CHA 1/2-Gang 3/4″ Conduit Housing Assembly**

7 1/4″ (184mm)

5BLH

1PTHA

575CHA

20A Receptacles

4″ (102mm)

3 1/4″ (83mm)

2 1/4″ (58mm)
16 1/4″ (412mm)

Bottom View

3/16″ (4.8mm)
No Bevel

Top View

Flush Style Cover

NOTE: For more information on Device Plates and Bottom Feed Plates and on the additional options available, see the Device Plates and Bottom Feed Plates sections found later in this document.

• Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.
  ** Also includes junction box attached to the 3/4″ conduit.

CS3080 — Updated September 2022 — For latest specs visit www.legrand.us/wiremold

6

WIREMOLD®
EvolutionTM Series 6″ Poke-Thru Devices

Evolution Series 6″ Poke-Thru Devices Ordering Information

Catalog No./Item Powder Coat Finishes 6ATC2BK 6ATC2BZ 6ATC2GY Durable Finishes 6ATC2AA 16 1/4″ 6ATC2SB (412mm) 6ATC2SN
NOTE: UL Fire Classified for up to 2-hour rated floors.
NOTE: Receptacles can be wired as a standard or isolated ground device.
7 1/4″ (184mm)

Description/Specifications
Recessed Unwired Surface Style Poke-Thru Assembly ­
· Designed to be installed in a concrete floor which has access in the ceiling of the floor below for running power, data and audio/video services.
· Poke-thru device installs into a 6″ (152mm) to a 6 1/8″ (155mm) diameter hole.
· The unit comes with a surface style cover, and three (3) empty compartments that are recessed 4″ (102mm) below the floor surface level, and can be configured to accept power, data, or A/V devices.
· The surface style cover is an aluminum cover that is designed to sit on top of finished floor surfaces such as: carpet, tile, wood, polished concrete or terrazzo.
· Covers are available in six finishes ­ Three powder coat finishes: black (BK), gray (GY), and bronze (BZ) ­ Three durable finishes: brushed aluminum (AA), satin brass plated (SB), and satin nickel plated (SN)

Country of Origin: USA

INCLUDED For Side Compartments: · No Device Plates are included
For Center Compartment: · No Device Plates are included
For Bottom Feed Compartment: · One (1) 5PTHA 1/2-Gang Pass-Through Housing Housing · One (1) 1PTHA 1-Gang Pass-Through Housing Assembly · One (1) 575CHA 1/2-Gang 3/4″ Conduit Housing Assembly**

5PTHA

1PTHA

575CHA

4″ (102mm)

3 1/4″ (83mm)

2 1/4″ (58mm)
16 1/4″ (412mm)

Bottom View

3/16″ (4.8mm)
8° Bevel

Top View

Surface Style Cover

NOTE: For more information on Device Plates and Bottom Feed Plates and on the additional options available, see the Device Plates and Bottom Feed Plates sections found later in this document.
** Also includes junction box attached to the 3/4″ conduit.

CS3080 — Updated September 2022 — For latest specs visit www.legrand.us/wiremold

7

WIREMOLD®
EvolutionTM Series 6″ Poke-Thru Devices

Evolution Series 6″ Poke-Thru Devices Ordering Information

Catalog No./Item
Powder Coat Finishes 6AT2BK 6AT2BZ 6AT2GY

Durable Finishes

6AT2AA 6AT2SB 6AT2SN

16 1/4″ (412mm)

NOTE: UL Fire Classified for up to 2-hour rated floors.
NOTE: Receptacles can be wired as a standard or isolated ground device.
NOTE: Includes one (1) 6TS Tile Shim.

Description/Specifications
Recessed Unwired Flush Style Poke-Thru Assembly ­ · Designed to be installed in a concrete floor which has access in the ceiling of the
floor below for running power, data and A/V services. · Poke-thru device installs into a 6″ (152mm) to a 6 1/8″ (155mm) diameter hole. · The unit comes complete with a flush style cover, and three (3) empty
compartments that are recessed 4″ (102mm) below the floor surface level and can be configured to accept power, data, or audio/video devices. · The flush style cover is an aluminum cover that is designed to sit flush with finished floor coverings such as: carpet, tile, or wood · Covers are available in six finishes ­ Three powder coat finishes: black (BK), gray (GY), and bronze (BZ) ­ Three durable finishes: brushed aluminum (AA), satin brass plated (SB), and
satin nickel plated (SN)
Country of Origin: USA
INCLUDED For Side Compartments: · No Device Plates are included For Center Compartment: · No Device Plates are included For Bottom Feed Compartment: · One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly · One (1) 1PTHA 1-Gang Pass-Through Housing Assembly · One (1) 575CHA 1/2-Gang 3/4″ Conduit Housing Assembly**

7 1/4″ (184mm)
3 1/4″ (83mm)

5PTHA
4″ (102mm)
2 1/4″ (58mm)
16 1/4″ (412mm)

1PTHA

575CHA

Bottom View

Top View
3/16″ (4.8mm)
No Bevel

Flush Style Cover

NOTE: For more information on Device Plates and Bottom Feed Plates and on the additional options available, see the Device Plates and Bottom Feed Plates sections found later in this document.
** Also includes junction box attached to the 3/4″ conduit.

CS3080 — Updated September 2022 — For latest specs visit www.legrand.us/wiremold

8

WIREMOLD®
EvolutionTM Series 6″ Poke-Thru Devices

Evolution Series 6″ Poke-Thru Devices Ordering Information

Catalog No./Item
Powder Coat Finishes 6ATC2PAVBK 6ATC2PAVBZ 6ATC2PAVGY

Durable Finishes 6ATC2PAVAA 6ATC2PAVSB 6ATC2PAVSN

16 1/4″ (412mm)

NOTE: UL Fire Classified for up to 2-hour rated floors.
NOTE: Receptacles can be wired as a standard or isolated ground device.

Description/Specifications
Recessed Prewired A/V Surface Style Poke-Thru Assembly ­ · Designed to be installed in a concrete floor which has access in the ceiling of the
floor below for running power, data and A/V services. · Poke-thru device installs into a 6″ (152mm) to a 6 1/8″ (155mm) diameter hole. · The unit comes complete with a surface style cover, one (1) pre-wired, pre-installed
duplex receptacle and various low voltage and AV devices plates. · All of the devices are recessed 4″ (102mm) below the floor surface level. · The surface style cover is an aluminum cover that is designed to sit on top of
finished floor surfaces, such as: carpet, tile, wood, polished concrete or terrazzo. · Covers are available in six finishes
­ Three powder coat finishes: black (BK), gray (GY), and bronze (BZ) ­ Three durable finishes: brushed aluminum (AA), satin brass plated (SB), and satin
nickel plated (SN)
Country of Origin: USA
INCLUDED For Side Compartments: · One (1) proprietary Tamper-Resistant 20A Duplex Receptacle installed · 682A Device Plate (Not shown) · 68MAAP Device Plate (Not shown)
For Center Compartment: · 6DEC Mounting Plate (Not shown) · 6AAP Mounting Plate (Not shown) · 6MAAP Device Plate (Not shown)
For Bottom Feed Compartment: · One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly · One (1) 1PTHA 1-Gang Pass-Through Housing Assembly · One (1) 575CHA 1/2-Gang 3/4″ Conduit Housing Assembly**

7 1/4″ (184mm)

5PTHA

1PTHA

575CHA

20A Receptacle

4″ (102mm)

3 1/4″ (83mm)

2 1/4″ (58mm)
16 1/4″ (412mm)

Bottom View

Top View 3/16″ (4.8mm)
8° Bevel

Surface Style Cover

NOTE: For more information on Device Plates and Bottom Feed Plates and on the additional options available, see the Device Plates and Bottom Feed Plates sections found later in this document.
** Also includes junction box attached to the 3/4″ conduit.

CS3080 — Updated September 2022 — For latest specs visit www.legrand.us/wiremold

9

WIREMOLD®
EvolutionTM Series 6″ Poke-Thru Devices

Evolution Series 6″ Poke-Thru Devices Ordering Information

Catalog No./Item
Powder Coat Finishes 6AT2PAVBK 6AT2PAVBZ 6AT2PAVGY

Durable Finishes

6AT2PAVAA

16 1/4″

6AT2PAVSB

(412mm)

6AT2PAVSN

NOTE: UL Fire Classified for up to 2-hour rated floors.
NOTE: Receptacles can be wired as a standard or isolated ground device.
NOTE: Includes one (1) 6TS Tile Shim.

Description/Specifications
Recessed Prewired A/V Flush Style Poke-Thru Assembly ­ · Designed to be installed in a concrete floor which has access in the ceiling of the
floor below for running power, data and audio/video services. · Poke-thru device installs into a 6″ (152mm) to a 6 1/8″ (155mm) diameter hole. · The unit comes complete with a flush style cover, one (1) pre-wired, pre-installed
duplex receptacle, and various low voltage and AV devices plates. · All of the devices are recessed 4″ (102mm) below the floor surface level. · The flush style cover is an aluminum cover that is designed to sit flush with finished
floor coverings such as: carpet, tile, or wood. · Covers are available in six finishes
­ Three powder coat finishes: black (BK), gray (GY), and bronze (BZ) ­ Three durable finishes: brushed aluminum (AA), satin brass plated (SB), and satin
nickel plated (SN)
Country of Origin: USA
INCLUDED For Side Compartments: · One (1) proprietary Tamper-Resistant 20A Duplex Receptacle installed · 682A Device Plate · 68MAAP Device Plate
For Center Compartment: · 6DEC Mounting Plate · 6AAP Mounting Plate · 68MAAP Device Plate
For Bottom Feed Compartment: · One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly · One (1) 1PTHA 1-Gang Pass-Through Housing Assembly · One (1) 575CHA 1/2-Gang 3/4″ Conduit Housing Assembly**

7 1/4″ (184mm)

5PTHA

1PTHA

575CHA

20A Receptacle

4″ (102mm)

3 1/4″ (83mm)

2 1/4″ (58mm)
16 1/4″ (412mm)

Bottom View

Top View
3/16″ (4.8mm)
No Bevel

Flush Style Cover

NOTE: For more information on Device Plates and Bottom Feed Plates and on the additional options available, see the Device Plates and Bottom Feed Plates sections found later in this document.
** Also includes junction box attached to the 3/4″ conduit.

CS3080 — Updated September 2022 — For latest specs visit www.legrand.us/wiremold

10

WIREMOLD®
EvolutionTM Series 6″ Poke-Thru Devices

Evolution Series 6″ Poke-Thru Devices Ordering Information

Catalog No./Item
Powder Coat Finishes 6ATCFFBK 6ATCFFBZ 6ATCFFGY

Durable Finishes

6ATCFFAA 6ATCFFSB 6ATCFFSN

16 1/4″ (412mm)

NOTE: UL Fire Classified for up to 2-hour rated floors.

Description/Specifications
Furniture Feed Assembly with Surface Style Cover ­ · Designed to be installed in a concrete floor which has access in the ceiling of the
floor below for running power, data and A/V services. · Poke-thru device installs into a 6″ (152mm) to a 6 1/8″ (155mm) diameter hole. · The unit comes complete with a surface style cover that includes one (1) 3/4″
trade size screw plug opening and one (1) concentric 2″-1 1/4″ trade size screw plug opening. · The surface style cover is an aluminum cover that is designed to sit on top of finished floor surfaces, such as: carpet, tile, wood, polished concrete or terrazzo. · Covers are available in six finishes ­ Three powder coat finishes: black (BK), bronze (BZ), gray (GY) ­ Three durable finishes: brushed aluminum (AA), satin brass plated (SB), satin
nickel plated (SN)
Country of Origin: USA

INCLUDED For Side Compartments: · No Device Plates are included
For Center Compartment: · No Device Plates are included
For Bottom Feed Compartment: · One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly · One (1) 15FFHA 1-Gang Pass-Through Housing Assembly · One (1) 575CHA 1/2-Gang 3/4″ Conduit Housing Assembly**

7 3/4″ (197mm)

5PTHA

15FFHA

575CHA

4″ (102mm)

3 1/4″ (83mm)
Divider

2 1/4″ (58mm)
16 1/4″ (412mm)

Bottom View

Top View

NOTE: For more information on Device Plates and Bottom Feed Plates and on the additional options available, see the Device Plates and Bottom Feed Plates sections found later in this document.
** Also includes junction box attached to the 3/4″ conduit.

CS3080 — Updated September 2022 — For latest specs visit www.legrand.us/wiremold

11

WIREMOLD®
EvolutionTM Series 6″ Poke-Thru Devices

Evolution Series 6″ Poke-Thru Devices Ordering Information

Catalog No./Item 6STC
16 1/4″ (412mm)

Description/Specifications
Recessed Unwired Poke-Thru Stem Assembly ­ · Designed to be installed in a concrete floor which has access in the ceiling of the
floor below for running power, data and A/V services. · Poke-thru device installs into a 6″ (152mm) to a 6 1/8″ (155mm) diameter hole. · The unit comes complete with a disposable sheet metal cover, and three (3) empty
compartments that are recessed 4″ (102mm) below the floor surface level and can be configured to accept power, data, or audio/video devices. · Designed to work with the 6CTC2, 6CT2 and 6CFFTC style covers.

NOTE: UL Fire Classified for up to 2-hour rated floors.
NOTE: Receptacles can be wired as a standard or isolated ground device.

Country of Origin: USA
INCLUDED For Side Compartments: · No Device Plates are included
For Center Compartment: · No Device Plates are included
For Bottom Feed Compartment: · One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly · One (1) 1PTHA 1-Gang Pass-Through Housing Assembly · One (1) 575CHA 1/2-Gang 3/4″ Conduit Housing Assembly**

7 1/4″ (184mm)
3 1/4″ (83mm)

4″ (102mm)

5PTHA

1PTHA

2 1/4″ (58mm)
16 1/4″ (412mm)

Bottom View

575CHA

Top View

NOTE: For more information on Device Plates and Bottom Feed Plates and on the additional options available, see the Device Plates and Bottom Feed Plates sections found later in this document.
** Also includes junction box attached to the 3/4″ conduit.

CS3080 — Updated September 2022 — For latest specs visit www.legrand.us/wiremold

12

WIREMOLD®
EvolutionTM Series 6″ Poke-Thru Devices

Evolution Series 6″ Poke-Thru Devices Ordering Information

Catalog No./Item 6STCPAV
16 1/4″ (412mm)

Description/Specifications
Recessed Prewired A/V Poke-Thru Stem Assembly ­ · Designed to be installed in a concrete floor which has access in the ceiling of the
floor below for running power, data and A/V services. · Poke-thru device installs into a 6″ (152mm) to a 6 1/8″ (155mm) diameter hole. · The unit comes complete with a disposable sheet metal cover, one (1) pre-wired,
pre-installed duplex receptacle and various low voltage and AV devices plates. · All of the devices are recessed 4″ (102mm) below the floor surface level. · Designed to work with the 6CTC2 and 6CT2 style covers.

NOTE: UL Fire Classified for up to 2-hour rated floors.
NOTE: Receptacles can be wired as a standard or isolated ground device.

Country of Origin: USA
INCLUDED For Side Compartments: · One (1) proprietary Tamper-Resistant 20A Duplex Receptacle installed · 682A Device Plate · 68MAAP Device Plate
For Center Compartment: · 6DEC Mounting Plate · 6AAP MountingPlate · 68MAAP Device Plate
For Bottom Feed Compartment: · One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly · One (1) 1PTHA 1-Gang Pass-Through Housing Assembly · One (1) 575CHA 1/2-Gang 3/4″ Conduit Housing Assembly**

7 1/4″ (184mm)
3 1/4″ (83mm)

5PTHA
4″ (102mm)

1PTHA

2 1/4″ (58mm)
16 1/4″ (412mm)

Bottom View

575CHA

20A Receptacle

Top View

NOTE: For more information on Device Plates and Bottom Feed Plates and on the additional options available, see the Device Plates and Bottom Feed Plates sections found later in this document.
** Also includes junction box attached to the 3/4″ conduit.

CS3080 — Updated September 2022 — For latest specs visit www.legrand.us/wiremold

13

WIREMOLD®
EvolutionTM Series 6″ Poke-Thru Devices

Evolution Series 6″ Poke-Thru Devices Ordering Information

Catalog No./Item 6STCP
16 1/4″ (412mm)

Description/Specifications
Recessed Prewired Poke-Thru Stem Assembly ­ · Designed to be installed in a concrete floor which has access in the ceiling of the
floor below for running power, data and A/V services. · Poke-thru device installs into a 6″ (152mm) to a 6 1/8″ (155mm) diameter hole. · The unit comes complete with a disposable sheet metal cover, two (2) pre-wired,
pre-installed duplex receptacles and various low voltage devices plates. · All of the devices are recessed 4″ (102mm) below the floor surface level. · Designed to work with the 6CTC2 and 6CT2 style covers.

NOTE: UL Fire Classified for up to 2-hour rated floors.
NOTE: Receptacles can be wired as a standard or isolated ground device.

Country of Origin: USA
INCLUDED For Side Compartments: · Two (2) proprietary Tamper-Resistant 20A Duplex Receptacles installed
For Center Compartment: · One (1) 6ACT8A Mounting Plate · One (1) 6TRAC Mounting Plate · One (1) 6SER Mounting Plate
For Bottom Feed Compartment: · One (1) 5BLH 1/2-Gang Blank Housing* · One (1) 1PTHA 1-Gang Pass-Through Housing Assembly · One (1) 575CHA 1/2-Gang 3/4″ Conduit Housing Assembly**

7 1/4″ (184mm)
3 1/4″ (83mm)

5BLH
4″ (102mm)
2 1/4″ (58mm)
16 1/4″ (412mm)

1PTHA

575CHA

Bottom View

20A Receptacles Top View

NOTE: For more information on Device Plates and Bottom Feed Plates and on the additional options available, see the Device Plates and Bottom Feed Plates sections found later in this document.
** Also includes junction box attached to the 3/4″ conduit.

CS3080 — Updated September 2022 — For latest specs visit www.legrand.us/wiremold

14

WIREMOLD®
EvolutionTM Series 6″ Poke-Thru Devices

Evolution Series 6″ Poke-Thru Devices Ordering Information

Catalog No./Item

Description/Specifications

Catalog No./Item

ABPLUG6

Abandonment Plug Assembly ­ Complete abandonment plug assembly for 6″ opening. Assembly includes intumescent fire stop material to maintain a 2 hour fire rating of the floor.

6PPS

Country of Origin: USA

9 15/16″ (252mm)

Description/Specifications
6″ Pre-Pour Poke-Thru Sleeve ­ Nonmetallic sleeve attaches to structural steel or plywood decking and maintains 6″-6 1/8″ diameter cast in core hole. Unit includes three (3) attachment legs, two (2) end caps and three (3) thumb screws.
Country of Origin: USA

Evolution Series 6″ Poke-Thru Devices Cover Assemblies Ordering Information

Catalog No./Item

Description/Specifications

Powder Coat Finishes 6CTC2BK 6CTC2GY 6CTC2BZ Durable Finishes 6CTC2AA 6CTC2SB 6CTC2SN
7 1/4″ (184mm)

Surface Style Cover Assembly ­ Low profile cover designed to attach to the 6STC, 6STCP, and 6STCPAV Poke-Thru Stem Assemblies. Each cover is made from die-cast aluminum materials and equipped with a durable hinge which allows the cover to rotate open 180°, two (2) slide egress doors that lock in the open position and auto close around the cables when the covers are closed, an 8° beveled edge that meets ADA guidelines and reduces tripping hazards. These covers are designed to sit on top of finished floor surfaces such as: carpet, tile, wood, polished concrete and terrazzo. Available in three (3) aesthetic powder coated finishes: black (BK), gray (GY), bronze (BZ) and three durable finishes: brushed aluminum (AA), satin brass plated (SB) and satin nickel plated (SN).

Country of Origin: India or Mexico

Catalog No./Item

Description/Specifications

Powder Coat Finishes 6CTC2BKTR 6CTC2GYTR 6CTC2BZTR Durable Finishes 6CTC2AATR 6CTC2SBTR 6CTC2SNTR
7 1/4″ (184mm)

Tamper-Resistant Surface Style Cover Assembly ­ Low profile cover designed to attach to the 6STC, 6STCP, and 6STCPAV Poke-Thru Stem Assemblies. Each cover is made from die-cast aluminum materials and equipped with a tamper-resistant screw to keep out unauthorized personnel, a durable hinge which allows the cover to rotate open 180°, two (2) slide egress doors that lock in the open position and auto close around the cables when the covers are closed, an 8° beveled edge that meets ADA guidelines and reduces tripping hazards. These covers are designed to sit on top of finished floor surfaces such as: carpet, tile, wood, polished concrete and terrazzo. Available in three (3) aesthetic powder coated finishes: black (BK), gray (GY), bronze (BZ) and three durable finishes: brushed aluminum (AA), satin brass plated (SB) and satin nickel plated (SN).

8° Beveled Edge

Country of Origin: India or Mexico 8° Beveled Edge

3/16″ (4.8mm)

3/16″ (4.8mm)

NOTE: All surface style poke-thru devices come with a transition angle to aid in the change in floor elevation.

NOTE: All surface style poke-thru devices come with a transition angle to aid in the change in floor elevation.

CS3080 — Updated September 2022 — For latest specs visit www.legrand.us/wiremold

15

WIREMOLD®
EvolutionTM Series 6″ Poke-Thru Devices

Evolution Series 6″ Poke-Thru Devices Cover Assemblies Ordering Information

Catalog No./Item

Description/Specifications

Powder Coat Finishes 6CT2BK 6CT2GY 6CT2BZ
Durable Finishes 6CT2AA 6CT2SB 6CT2SN
7 1/4″ (184mm)

Flush Style Cover Assembly ­ Low profile covers that are designed to attach to the 6STC, 6STCP, and 6STCPAV Poke-Thru Stem Assemblies. Each cover is made from die-cast aluminum materials and equipped with a durable hinge which allows the cover to rotate open 180°, two (2) slide egress doors that lock in the open position and auto close around the cables when the covers are closed. These covers are designed to sit flush with finished floor coverings such as: carpet, tile, and wood. Available in three (3) aesthetic powder coated finishes: black (BK), gray (GY), bronze (BZ) and three metal finishes: brushed aluminum (AA), satin brass plated (SB) and satin nickel plated (SN).

Country of Origin: India or Mexico

No Bevel

Catalog No./Item

Description/Specifications

Powder Coat Finishes 6CT2BKTR 6CT2GYTR 6CT2BZTR Durable Finishes 6CT2AATR 6CT2SBTR 6CT2SNTR
7 1/4″ (184mm)

Tamper-Resistant Flush Style Cover Assembly ­ Low profile covers that are designed to attach to the 6STC, 6STCP, and 6STCPAV Poke-Thru Stem Assemblies. Each cover is made from die-cast aluminum materials and equipped with a tamper-resistant screw to keep out unauthorized personnel, a durable hinge which allows the cover to rotate open 180°, two (2) slide egress doors that lock in the open position and auto close around the cables when the covers are closed. These covers are designed to sit flush with finished floor coverings such as: carpet, tile, and wood. Available in three (3) aesthetic powder coated finishes: black (BK), gray (GY), bronze (BZ) and three metal finishes: brushed aluminum (AA), satin brass plated (SB) and satin nickel plated (SN).

3/16″ (4.8mm)

Country of Origin: India or Mexico No Bevel

NOTE: Includes 6TS Tile Shim.

3/16″ (4.8mm)

Powder Coat Finishes 6CFFTCBK 6CFFTCGY 6CFFTCBZ
Durable Finishes 6CFFTCAA 6CFFTCSB 6CFFTCSN
7 3/4″ (197mm)

Furniture Feed Cover Assembly ­ Surface style, die-cast aluminum cover assembly, with one (1) 3/4″ trade size screw plug opening, and one (1) concentric 2″-1 1/4″ trade size screw plug opening. Cover assembly is available in three (3) powder coated finishes: black (BK), gray(GY), bronze (BZ) and also available in three (3) durable finishes: brushed aluminum (AA), satin brass plated (SB) and satin nickel plated (SN). 6CFFTC Series Cover Assemblies designed for use with 6STC Poke-Thru Stem Assembly. Includes one (1) 3/4″ and one (1) 2″ trade size conduit fittings and one (1) divider to separate services.

Country of Origin: USA

NOTE: Includes 6TS Tile Shim.

6TS

Tile Shim ­ Used for floor coverings

greater than 3/16″ (4.8mm). The

6TS will allow the top surface of the

cover to be flush with the finished

floor. Includes: six (6) 1/16″ (1.6mm)

thick shims. Up to a total of 3/8″

(9.5mm) of adjustment.

Country of Origin: USA

CS3080 — Updated September 2022 — For latest specs visit www.legrand.us/wiremold

16

WIREMOLD®
EvolutionTM Series 6″ Poke-Thru Devices

Evolution Series Heavy Duty 6″ Round Cover Assemblies Ordering Information

Catalog No./Item

Description/Specifications

Catalog No./Item

Description/Specifications

6CTCHDSS
7 1/4″ (184mm)
6CTCHDBS
7 1/4″ (184mm)

Stainless Steel Surface Style Cover Assembly ­ High load cover designed to attach to the 6STC, 6STCP, and 6STCPAV Poke-Thru Stem Assemblies, as well as RFB2E, RFB4E and CRFB2 floor boxes.
· Cover is made from stainless steel.
· Equipped with a dampened self-closing hinge.
· 8° beveled edge meets ADA guidelines and reduces tripping hazards.
· Designed to sit on top of finished floor surfaces such as: carpet, tile, wood, polished concrete and terrazzo
Country of Origin: China
Brass Surface Style Cover Assembly ­ High load cover designed to attach to the 6STC, 6STCP, and 6STCPAV Poke-Thru Stem Assemblies, as well as RFB2E, RFB4E and CRFB2 floor boxes.
· Cover is made from brass.
· Equipped with a dampened self-closing hinge.
· 8° beveled edge meets ADA guidelines and reduces tripping hazards.
· Designed to sit on top of finished floor surfaces such as: carpet, tile, wood, polished concrete and terrazzo
· Finished with a clear coating

6CTHDSS
7 1/4″ (184mm)
6CTHDBS
7 1/4″ (184mm)

Country of Origin: China Surface Style Cover

3/16″ (4.8mm)

Stainless Steel Flush Style Cover Assembly ­ High load cover designed to attach to the 6STC, 6STCP, and 6STCPAV Poke-Thru Stem Assemblies, as well as RFB2E, RFB4E and CRFB2 floor boxes.
· Cover is made from stainless steel.
· Equipped with a dampened self-closing hinge.
· Designed to sit flush with finished floor coverings such as: carpet, tile, wood and terrazzo. (Terrazzo requires use of the 6CT-CTR Terrazzo Ring.)

Country of Origin: China
Brass Flush Style Cover Assembly ­ High load cover designed to attach to the 6STC, 6STCP, and 6STCPAV Poke-Thru Stem Assemblies, as well as RFB2E, RFB4E and CRFB2 floor boxes.
· Cover is made from brass.
· Equipped with a dampened self-closing hinge.
· Designed to sit flush with finished floor coverings such as: carpet, tile, wood and terrazzo. (Terrazzo requires use of the 6CT-CTR Terrazzo Ring.)
· Finished with a clear coating.

Country of Origin: China

Flush Style Cover

No Bevel

3/16″ (4.8mm)

NOTE: Includes 6TS Tile Shim.

8° Bevel

6CT-CTR

6″ Terrazzo Ring ­ · Nonmetallic ring for use on
terrazzo floor applications with Heavy Duty Flush Style Covers.
Country of Origin: USA

CS3080 — Updated September 2022 — For latest specs visit www.legrand.us/wiremold

17

WIREMOLD®
EvolutionTM Series 6″ Poke-Thru Devices

Evolution Series 6″ Poke-Thru Devices Center Mount Device Plates Ordering Information

Catalog No./Item

Description/Specifications

Catalog No./Item

Description/Specifications

6AAP 6ACT8A 6B 6DEC 6DP

Device Mounting Plate ­ Device plate that will accept up to two (2) Extron® Electronics AAP style plates. For use in the center compartment only. Devices supplied by others.
Country of Origin: USA
Device Mounting Plate ­ Device plate that will accept up to eight (8) ports of communication devices. For use in the center compartment only. Devices supplied by others.
Country of Origin: USA
Device Mounting Plate ­ Device plate used to blank off center compartment, when no devices are used.
Country of Origin: USA
Device Mounting Plate ­ Device plate that will accept Decorator style devices such as 20A receptacles, GFCIs, 106 adapters or A/V devices. For use in the center compartment only. Devices supplied by others.
Country of Origin: USA
Device Mounting Plate ­ Device plate that will accept standard 15A or 20A duplex receptacle, duplex Turnlok receptacle or 106 data adapter. For use in the center compartment only. Devices supplied by others. Country of Origin: USA

6MOS 6MOSBS 6S1 6S2 6SER

Mosaic Device Plate ­ Device plate will accept two (2) standard (45mm x 45mm) or one (1) standard (45mm x 90mm) Mosaic style device(s). Devices supplied by others.
Country of Origin: USA
NOTE: Not designed to accept adorne style devices.
Mosaic British Standard Device Plate ­ Device plate will accept two (2) Mosaic British standard devices (45mm x 45mm). For use in the center compartment only. Devices supplied by others.
Country of Origin: USA
NOTE: Not designed to accept adorne style devices.
Device Mounting Plate ­ Receptacle opening 1 3/8″ (35mm). For use in the center compartment only. For 6″ pokethru units only.
Country of Origin: USA
Device Mounting Plate ­ Receptacle opening 1 9/16″ (40mm). For use in the center compartment only. For 6″ pokethru units only.
Country of Origin: USA
Device Mounting Plate ­ Device plate that will accept up to four (4) Ortronics® Series II dual modular inserts. For use in the center compartment only. Devices supplied by others.
Country of Origin: USA

6MAAP 6MAAP2A

Device Mounting Plate ­ Device plate that will accept up to six (6) Legrand AVIP or Extron® Electronics MAAP style plates. For use in the center compartment only. Devices supplied by others.
Country of Origin: USA
Device Mounting Plate ­ Combination device plate that will accept up to three (3) Legrand AVIP or Extron® Electronics MAAP style plates,and up to two (2) ports of communication devices. For use in the center compartment only. Devices supplied by others.
Country of Origin: USA

6TRAC

Device Mounting Plate ­ Device plate that will accept up to eight (8) Ortronics® TracJack devices. For use in the center compartment only. Devices supplied by others.
Country of Origin: USA

6AT Center Mount Device Plate Mounting Location
Mounting plates on this page can be installed in the shaded location indicated in this illustration.

CS3080 — Updated September 2022 — For latest specs visit www.legrand.us/wiremold

18

WIREMOLD®
EvolutionTM Series 6″ Poke-Thru Devices

Evolution Series 6″ Poke-Thru Devices Side Mount Device Plates Ordering Information

Catalog No./Item

Description/Specifications

Catalog No./Item

Description/Specifications

68REC

20A Duplex Receptacles ­ Two (2) proprietary Tamper-Resistant 20A duplex power receptacles with mounting plates. Designed to fit into the 6″, 8″ and 10″ Poke-Thru Devices. Receptacle can be wired as a standard or isolated ground device.

682A

Country of Origin: USA

Device Mounting Plate ­ Device plate that will accept up to two (2) ports of communication devices. For use in either of the two side compartments only. Not for use in the center compartment. Communication devices supplied by others.
Country of Origin: USA

68B

Device Mounting Plate ­ Blank

plate. Used to blank off either of

68REC-CTRL*

Controlled Receptacle ­ One (1)

the side compartments when no

Tamper-Resistant 20A proprietary

devices or cabling are to be used.

duplex receptacle marked with a

permanent controlled receptacle

Country of Origin: USA

marking .

Country of Origin: USA

68MAAP

Device Mounting Plate ­ Device plate that will accept up to two (2) Legrand AVIP or Extron® Electronics MAAP device plates. For use in either of the two side compartments only. Not for use in the center compartment. Extron Devices supplied by others.

682A-PT

Device Plate ­ Device plate that allows for communication cabling to pass through. Includes one (1) rectangular adapter ring.
Country of Origin: USA

Country of Origin: USA

68REC-25

20A Duplex Receptacles ­ Two (2) proprietary TamperResistant 20A duplex power receptacles with mounting plates and 25′ leads. Designed to fit into the 6″, 8″ and 10″ Poke-Thru Devices. Receptacle can be wired as a standard or isolated ground device.
Country of Origin: USA

6AT Side Mount Device Plates Mounting Locations
Device Plates in this section can be installed in the shaded locations indicated in this illustration.

CS3080 — Updated September 2022 — For latest specs visit www.legrand.us/wiremold

19

WIREMOLD®
EvolutionTM Series 6″ Poke-Thru Devices

Evolution Series 6″ Poke-Thru Devices Bottom Feed Device Plates Ordering Information

Catalog No./Item

Description/Specifications

Catalog No./Item

Description/Specifications

175CHA

Bottom Housing Assembly ­ One-gang 3/4″ trade size conduit housing assembly. Includes junction box attached to 3/4″ trade size conduit for electrical power connections. For use in the center compartments of 6″, 8″ and 10″ poke-thru devices.
Country of Origin: USA
NOTE: When using on a 6ATCFF Furniture Feed unit, 1BHA (sold separately) is required.

1BLH

Bottom Housing Assembly ­ One-gang blank housing assembly. Designed to blank off compartment when no cable pass through is required. For use in the center compartments of 6″, 8″ and 10″ poke-thru devices.
Country of Origin: USA
NOTE: When using on a 6ATCFF Furniture Feed unit, 1BHA (sold separately) is required.

1125CHA

Bottom Housing Assembly ­ One-gang 1 1/4″ trade size conduit housing assembly. For use in the center compartments of 6″, 8″ and 10″ poke-thru devices.
Country of Origin: USA
NOTE: When using on a 6ATCFF Furniture Feed unit, 1BHA (sold separately) is required.

15FFHA

Bottom Housing Assembly ­ One and a half-gang pass through conduit housing assembly. Used for furniture feed applications on the center compartment only. Only for use with 6″ poke-thru units.
Country of Origin: USA

1PTHA 175CHA-LJB 1100CHA

Bottom Housing Assembly ­ One-gang pass through housing assembly. Designed to allow pass through of communication cables when no conduit is required. For use in the center compartments of 6″, 8″ and 10″ poke-thru devices.
Country of Origin: USA
NOTE: When using on a 6ATCFF Furniture Feed unit, 1BHA (sold separately) is required.
Bottom Housing Assembly ­ One-gang 3/4″ trade size conduit housing assembly. For use in the center compartments of 6″, 8″ and 10″ poke-thru devices.
Country of Origin: USA
NOTE: When using on a 6ATCFF Furniture Feed unit, 1BHA (sold separately) is required.
Bottom Housing Assembly ­ One-gang 1″ trade size conduit housing assembly. For use in the center compartments of 6″, 8″ and 10″ poke-thru devices.
Country of Origin: USA
NOTE: When using on a 6ATCFF Furniture Feed unit, 1BHA (sold separately) is required.

1BHA

Bottom Housing Assembly ­ One-gang bottom housing assembly. Designed to accept 175CHA, 1125CHA, 1PTHA, 1100CHA and 1BLH plates. Only for use with 6″ poke- thru units.
Country of Origin: USA

6AT Bottom Feed Center Mount Device Plate Location
All bottom housing assemblies on this page can be installed in the shaded locations indicated in these illustrations.

CAUTION: Receptacle supplied with this Poke-Thru is not suitable for direct field wiring. Contact manufacturer for replacement. Field modifications will void UL Listing and Classification. Replacement receptacle is limited to this manufacturers’ Catalog No 68REC.

CAUTION:

Receptacle supplied with this Poke-Thru is not suitable for direct field wiring. Contact manufacturer for replacement. Field modifications will void UL Listing and Classification. Replacement receptacle is limited to this manufacturers’ Catalog No 68REC.

CS3080 — Updated September 2022 — For latest specs visit www.legrand.us/wiremold

20

WIREMOLD®
EvolutionTM Series 6″ Poke-Thru Devices

Evolution Series 6″ Poke-Thru Devices Bottom Feed Device Plates Ordering Information

Catalog No./Item

Description/Specifications

Catalog No./Item

Description/Specifications

5PTHA

Bottom Housing Assembly ­ Half-gang pass through housing assembly. Designed to allow pass through of communication cables when no conduit is required. For use in 6″ and 8″ poke-thru devices.
Country of Origin: USA

575CHA

Bottom Housing Assembly ­ Half-gang 3/4″ trade size conduit housing assembly. Includes junction box attached to 3/4″ trade size conduit for electrical power connections. For use in 6″ and 8″ poke-thru devices.
Country of Origin: USA

5BLH 152CHA

Bottom Housing Assembly ­ Half-gang blank housing assembly. Designed to blank off compartment when no cable pass through is required. For use on side compartments only. For use in 6″ and 8″ poke-thru devices. Includes tunnels for 6″ and 8″ poke-thru devices.
Country of Origin: USA
Bottom Housing Assembly ­ One and a half-gang 2″ trade size conduit housing assembly. For use in 6″ poke-thru devices. When 152CHA is used with the 6ATC2 (2) pre-wired receptacle model it must be installed with included bottom feed plates using provided 3″ screws
Country of Origin: USA

6AT Bottom Feed Side Mount Device Plate Mounting Locations
Device Plates in this section can be installed in the shaded locations indicated in this illustration.

152CHA Installation Notes
When used with two pre-wired receptacle modules (6ATC2P), the assembly must be installed with the included bottom feed plates and provided 3″ screws

152CHA (6ATC2PAV)

152CHA (6ATC2P)

NOTE: All brand and product names referenced in this document are registered trademarks or trademarks of their respective holders.
CS3080 — Updated September 2022 — For latest specs visit www.legrand.us/wiremold

Legrand, North America 60 Woodlawn Street West Hartford, CT 06110 1.877.BY.LEGRAND (295.3472) www.legrand.us Canada 905.738.9195 www.legrand.ca
FOLLOW US

References

• Resources
• Wiremold Wire and Cable Management Products from Legrand
• The Evolution™ Series | Legrand
• Product Sourcing and Certifications Database | UL Solutions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>