imperii RR FIERRO Smartwatch Trami IP67 Instruction Manual

Smartwatch
TRAMI IP67

Use Instructions

Welcome to the user guide of the high-performance smart bracelet that you will offer a unique sports experience.
Maintain
Please follow the following recommendations for bracelet maintenance:
– Clean the bracelet regularly, especially the inside, and keep it dry.
– Adjust the strap fastening around your wrist to ensure a secure fit good ventilation of the product.
– Excessive use of lotions for skincare while using the watch is not recommended.
– In case of skin allergy or any other discomfort, stop using the bracelet.
Loading

1. To charge the device, connect the charging cable to the adapter
   or to the USB port of your computer.

2. The charging process will be displayed on the screen.

Downloading and pairing the wristband APP

1. Diagram of the main body of the bracelet

2. Getting started
   Press the side button for 3 seconds or connect it to a charger.

3. Download the APP and proceed with its installation.
   1>. Scan the QR code using your phone and download the APP.
   2>. To download and install the Da Fit App, select Apple Store if you are using an iOS system or Play Store if you have an Android system.
   Note: Your mobile phone will need to be compatible with Android 5.1 or
   IOS8.0 or higher, and with Bluetooth 4.0 or later higher version.

4. View the MAC address
   You can get the MAC address of the bracelet by pressing the interface main for two seconds.
   The MAC address used to indicate the hardware address is the only one bracelet ID and can not be changed. If you use a phone notebook to identify the bracelet, you will be able to identify it only at using the MAC number. The MAC address is used to identify the bracelet and quickly connects to the mobile phone.

5. Associate the bracelet with the APP
   1. Go to Devices and click Add Device.
   2. Select your device from the list.
   3. Click to proceed to pairing (direct connection with the Android system).
   4. End pairing.

Note : For Android, click on the type of device selected and Android will be able to disconnect from the phone. For iOS, configure Bluetooth when the system operating is offline. Click on the symbol on the right to select Ignore this device.
Characteristics of the smartwatch

1. Getting started
   Tap the screen to access the different menu interfaces.
   

2. Introduction to the main functions of the interface.
   Following the pairing of the bracelet and APP, time, date, number of steps and calories will synchronize.

3. Step Counter, Distances and Calories
   The interface corresponding to the step counter indicates the number of steps performed. By wearing the bracelet around your wrist, this one measures automatically the number of steps taken, the distance traveled and the calories spent.

4. Monitoring the heart rate
   4.1 By touching the screen, you switch to the Heart Rate Monitoring interface. The test will begin after 2 seconds. It will begin and end by emitting a vibration as a reminder.
   Health data through Dynamic Heart Rate is displayed in real-time. In heart rate monitoring mode, the battery life of the wristband decreases. If you touch the screen, the heart rate measurement value displays the last seven measurements.
   4.2 The heart rate sensor must be in contact with the skin during the measurement of the heart rate. In the event that the bracelet is not properly tightened around your wrist, exposure to the sensor light could cause an incorrect measurement of your frequency. Avoid looking at the green light emitted by the sensor, which could cause eye irritation.
   4.3 Although this device can measure the frequency in real-time and in a dynamic position, we recommend sitting in a sitting position to measure the heart rate. Otherwise, the test may be slow to start or will not display any data. The user should not move until the wristband starts measuring the heart rate and can see the data in real-time.
   4.4 If you think that the measured data do not correspond to reality, measure your heart rate after resting. The average value obtained after five consecutive measurements is a more accurate value.
   4.5 This device is used to measure heart rate dynamically and in real-time. This is why the heart rate may vary depending on the situation: when you talk, eat or drink. Your heart rate will depend on each situation.
   4.6 Make sure the bottom portion of the heart rate sensor is clean and free of dirt when performing your measurements. The color of the skin, the thickness of the body fuzz, scars or tattoos may affect the accuracy of the test results. If so, please measure your heart rate again.
   4.7 Prolonged measurement may cause the device to overheat. If this is the case, we recommend removing the bracelet and using it once it has cooled down.
   4.8 Cold could affect test results. Please perform the test at warmer temperatures.

5. Blood pressure
   If you click on the touch zone, you will switch to the Blood Pressure Monitoring interface. Once on the interface and after 2 seconds, the test can start. The test will begin and end with a vibration as a reminder. If you press and hold, the last seven measurement values of the blood pressure will be displayed.
   The blood pressure should be measured in a calm environment and at an appropriate temperature. Rest for at least 5 minutes before starting the test. Avoid being nervous, anxious, or excited, and measure your pressure three times with an interval of 2 minutes between each measurement. Record the average value of the three measurements.
   

6. 6Oxygen in the blood
   If you click on the touch zone, you will switch to the Oxygen in Blood interface. When the Oxygen in Blood interface is active for 2 seconds, the test can begin. The test will begin and end with a vibration as a reminder. If you press and hold, the last seven measurement values for oxygen in the blood will be displayed.
   Oxygen saturation in the blood is the percentage of oxyhemoglobin that has been oxygenated in the blood and the overall amount of hemoglobin that can be oxygenated. This corresponds to the concentration of oxygen in the blood.
   Note : Blood pressure and oxygen data are only a reference and should not be used for medical purposes.

7. Training
   In the sport interface, if you press the touch key for 3 seconds, you will enter Motion mode that includes seven sports: walking, running, horseback riding,  jumping rope, badminton, basketball, and football. If you choose Walk mode, press and hold the touch key for two seconds to save the motion settings. If you want to pause, press the touchpad and the side key for one second to exit the mode.
   

8. Messages
   Go to the Messages interface and press the touch zone for 2 seconds to access the contents of the message. Click on the touch zone to go to the next message. The content that is displayed consists of text messages and messages from third-party applications.
   A maximum of 3 messages are retained and will be substituted each time by three others.

9. Weather
   The weather interface allows you to view the weather information of the day and the next day.
   The weather information is synchronized following the connection to the APP. In case of prolonged disconnection, this one will not be updated.

10. Settings
    Long press “Settings” in the following function interfaces:
    10.1 Remote shutter
    When you connect your device, you will be able to remotely control your phone’s camera.

10.2 Music Playback Controller
When you connect your device, you will be able to remotely control the music player of your phone.
10.3 Stopwatch
Long press the stopwatch interface to start this function. You can press the touch button to pause the timer and press again to stop the timing.
10.4 Adjustment of luminance
Pressing the touch zone will take you to the page corresponding to the brightness. You can press the touch button to select the brightness and the side button to go back.
10.5 Restoring factory settings
Touch the touch zone for more than 3 seconds to start erasing all bracelet messages and to restore the factory settings.

11. Judgment
    If you press the side button for 3 seconds, the main interface will activate the stop interface.
    If you touch the touch zone for more than 3 seconds, the device will turn off and if you press the side button, the display will show the main interface.

Frequently asked Questions

1. Question: What if the phone does not locate the bracelet?
Answer: First check that the bracelet battery is charged, then place the bracelet near the mobile phone and try to connect them.
If the bracelet still does not connect, turn off and on the phone’s Bluetooth, or reset it.
2. Question: Can Bluetooth not connect?
Answer: 1> The connection time may be different each time the signal from the Bluetooth wireless connection is interrupted. If the Bluetooth does not connect for a long time, be sure to use it in a place free from disturbances of the magnetic field or the Bluetooth device.
2> The Bluetooth services of the mobile phone disconnect when you restart it. It is possible that the Bluetooth is not connected.
3> The mobile phone’s Bluetooth connects normally by restarting the phone.
3. Question: Why does the bracelet not vibrate if the incoming call notification has been activated?
Answer: First, check that the Bluetooth of the mobile phone is on and the wristband is connected. Second, verify that the wristband APP is working (in the background) for phones using Android and iOS systems.
4. Question: Why does the bracelet not receive update messages?
Answer: 1> You must confirm that your mobile operator allows you to activate the sending of the message update.
2> Check that messages can be displayed normally on the notification bar of the mobile phone.
The update message is completed by reading the message from the notification bar of the mobile phone. The bracelet will not receive any notification if no message is displayed on the notification bar of the phone (access the notification settings in the phone settings and activate the notification button of WeChat, QQ, SMS and the phone operator mobile).
3> Open the auxiliary function settings of the bracelet.
(Look for the auxiliary function in the phone settings and open the auxiliary settings of the bracelet.)
Settings for iPhone:
1> Make sure the message update notification button is enabled on your phone.
2> Check that the notification can be displayed normally on the notification bar of your phone (go to the configuration of the notifications in the phone configuration and activate the notification button of WeChat, QQ, SMS, and the telephony operator mobile).
5. Question: Why can not I measure my heart rate?
Answer: It is important to be relaxed when measuring the heart rate and to keep the lower part of the bracelet in contact with your skin. Do not shake your arms during the test.
6. Question: Why are the blood pressure values different from those of the blood pressure monitor?
Answer: The difference between the values measured by the bracelet and the blood pressure monitor is related to several factors. The sphygmomanometer measures the arterial pressure in the brachial artery and the bracelet measures the pressure in the two main branches of the arterioles.
Under normal conditions, the difference between the values of the aortic arterial pressure and those of the arterioles is between 3 and 40. If you use the bracelet and the blood pressure monitor at the same time to measure the pressure, and knowing that the blood is flowing in the artery in a centrifugal direction, the tensiometer bandage measures the pressure just below the half of the elbow and temporarily prevents the blood from flowing quietly downward, through the lower branch of the artery. This increases the vascular tension and causes a greater difference between the measurements of the arterial pressure.
7. Question: Why is it not recommended to wear the bracelet when taking a bath or shower with hot water?
Answer: When the water temperature is high, water vapor is present and it has a reduced molecular radius, it is easy for the water vapor to enter the wrist case.  When the temperature decreases, the vapor condenses and turns into liquid drops, which could cause a short circuit inside the bracelet and damage the circuit board of the ring or the bracelet.

Warning
Consult your doctor before starting to practice a new sport. The smart bracelet should not be used or medical purposes, although it allows you to control the dynamic heart rate in real-time.

http://plus.crrepa.com/app-download/dafit

General settings
1.3 inch TFT screen type
170 mAh battery capacity
Battery life 6-8 days
Protection class IP 67
System requirements iOS 8.0, Android 5.1 or higher
All trademarks are the exclusive property of their respective companies.

TECHNICAL SERVICE: http://www.imperiielectronics.com/contactenos
Importado por:
B85947513
www.imperiielectronics.com
Pol. Ind. Neisa Sur
Avd. Marconi, Bloque 1, Nave 13
28021 Madrid
Made in PRC

imperii RR FIERRO Smartwatch Trami IP67 Instruction Manual – Download [optimized]
imperii RR FIERRO Smartwatch Trami IP67 Instruction Manual – Download
imperii RR FIERRO Smartwatch Trami IP67 Instruction Manual – OCR [PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>