u-blox NINAB4 Nina B411 Bluetooth Module Instructions
- June 12, 2024
- u-blox
Table of Contents
u-blox NINAB4 Nina B411 Bluetooth Module
Product Information
Report No. | AGC09881200501AP03C |
---|---|
Page | 1 of 1 |
Product Usage Instructions
To use the product, please follow the steps below:
- Identify the top view of the External Unit (EUT).
- Locate the antennas on the top view of the EUT:
Antenna 1 | Antenna 8 | Antenna 7 |
---|
- Identify the bottom view of the EUT.
- Locate the antennas on the bottom view of the EUT:
Antenna 2 | Antenna 3 |
---|---|
Antenna 4 | Antenna 6 |
Antenna 5
Please note that the above information is provided for reference purposes only and may vary based on the specific product model.
EXTERNAL PHOTOS
TOP VIEW OF EUT
BOTTOM VIEW OF EUT
End of Report
Any report having not been signed by authorized approver, or having been
altered without authorization, or having not been stamped by the “Dedicated
Testing/Inspection Stamp” is deemed to be invalid. Copying or excerpting
portion of, or altering the content of the report is not permitted without the
written authorization of AGC. The test resull presented in the report apply
only to the tested sample. Any objections to report issued by AGC should be
submitted to AGC within 15days after the issuance of the test repo
Further enquiry of validity or verification of the test report should be
addressed to AGC by agc01@agccert.com. Attestation
of Global Compliance(Shenzhen)Co., Ltd
Attestation of Global Compliance(Shenzhen)Std & Tech Co., Ltd
Tel: +86-755 2523 4088
E-mail: agc@agccert.com
Web: http://www.agccert.com/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>