PROGRESS LIGHTING P800022-028-CS Intrinsic 4 Inch 3000K Integrated LED Satin White Recessed Light Eyeball Integrated LED Downlight Instruction Manual
- June 4, 2024
- PROGRESS LIGHTING
Table of Contents
PROGRESS LIGHTING P800022-028-CS Intrinsic 4 Inch 3000K Integrated LED
Satin White Recessed Light Eyeball Integrated LED Downlight
Safety Information
Please read and understand this entire manual before attempting to assemble,
operate or install the product.
CAUTION: Read instructions carefully and turn electricity off at main
circuit breaker panel before beginning installation. CAUTION: Risk of fire.
Min. 90°C supply conductors. Consult a qualified electrician to ensure correct
branch circuit conductor. WARNING: If any Special Control Devices are used
with this fixture, follow instructions carefully to assure full compliance
with N.E.C. requirements. If there are any questions, contact a qualified
electrical contractor.
CAUTION: All glass is fragile. Use care when handling glass shades and
bulbs.
THIS PRODUCT MUST BE INSTALLED BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND
OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED, IN ACCORDANCE WITH THE
APPLICABLE INSTALLATION CODE.
KEEP THESE INSTALLATION INSTRUCTIONS
Suitable for use in closets, compliant when installed to NFPA®70 NEC® Section
410.16 (A)(1) and (C)(1 ). Min. 12in required between fixture and closet
storage space.
Preparation
- Before beginning installation, make sure all parts are included using the contents diagrams from page 1. If any part is missing or damaged, do not attempt to assemble, install or operate the product.
- Estimated assembly time: 30 minutes.
- Tools required for assembly (not included): Phillips screwdriver, pliers, wire stripper, safety glasses, electrical tape, ladder.
Care and Maintenance
Shut off main power supply before cleaning product or changing light bulbs. To
clean, wipe with damp cloth. Do not use abrasive cleaners or cleaners that
contain alcohol.
Assemble Instructions
-
Attach mounting bracket (AA) onto outlet box, using the mounting screws supplied with the outlet box (not included).
-
Strip 3/8″ of insulation from the electrical wire ends. Using wire nuts (BB), connect WHITE fixture wire to the WHITE supply wire from the outlet box; connect the BLACK fixture wire to the BLACK supply wire.
Connect the supply GROUND wire by fastening to the GROUND screw on the mounting plate. Push all wire connections into the outlet box.
ASSEMBLY INSTRUCTIONS
Select color temperature.
Attach fixture (A) onto the mounting bracket (AA).
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>