BAGTAG Flexible Batteryless Flex Airline User Manual
- June 12, 2024
- BAGTAG
Table of Contents
User manual
BAGTAG Flex
Flexible Batteryless Flex Airline
Welcome on board!
Your BAG TAG works in combination with the BAG TAG and/or supported airline
app. For a list of supported airlines, please check our website.
To register your BAG TAG, download the BAG TAG mobile application in the Apple
App Store or Google Play Store.
Register the BAG TAG Flex
Step 1: Log in the BAGTAG app
To register the BAG TAG device (which you only need to do once), go to the App
Store or Google Play Store and download the BAG TAG application. You will
first need to sign up or log in before registering the device.
Step 2: Add the device
Go to the device tab (suitcase icon) after logging in and select the ‘Add
device’ option. Check to see if your location sharing, Internet, and Bluetooth
are enabled.
Step 3: Register with NFC
To connect the BAG TAG with your phone, choose the ‘Activate with NFC’ option
in the BAG TAG app and place the back of your phone close to the device.
Keep in mind that depending on the phone, the NFC positioning varies (see the
next page for an indication). Continue to hover the phone until a blue light
appears on top of the BAG TAG, indicating that the devices are attempting to
connect. Wait till the blue light remains blue, which means the devices are
connected. The BAG TAG is now ready for its first flight.
Please note:
- Smartphone cases can make it difficult to establish an NFC connection.
- The distance you should have between your smartphone and the BAGTAG you would like to establish a connection with can be different for any kind of mobile phone.
- It is important to hold the devices stable, otherwise, there is a risk of losing connection.
Check in your baggage
Step 1: Check in
Check in your bag through the supported airline app. The luggage label is
transferred to the BAGTAG from within the airline’s mobile app. This option is
available after check-in.
Step 2: Updating the BAGTAG display
Choose your upcoming flight and activate the BAG TAG with NFC. Follow the
instructions in the airline app to update the BAG TAG display. The label
should be successfully sent to the BAG TAG, and the flight information will
appear on the e-paper display.
You will also receive a confirmation e-mail that your bag was successfully
checked in and labeled.
Please note
The check-in process can differ per airline. Check the airline’s website for
the correct instructions.
Attach the BAG TAG Flex
Attach
Wrap the strap around the suitcase handle and put it back in the strap holder,
which is situated on the back side of the Flex. Pull to tighten. The BAG TAG
is now secured to your bag.
Detach the BAG TAG Flex
Detach
Use the included ejector tool to unlock the attachment mechanism.
- Firmly press the tool in the hole of the strap case.
- Pull the Flex away from the baggage handle whilst pressing the tool into the hole.
- Further loosen the strap on the back of the Flex to detach the device.
Clear the BAG TAG Flex display
Step 1: Go to your device
To remove the flight information of the BAGTAG Flex, locate the device in the
BAGTAG app and choose the “try out this tag” option.
Step 2: Choose ‘Clear BAGTAG’
After scrolling down, a test flight “clear BAG TAG” is displayed. Choose this
option and follow the steps in the BAG TAG app to clear the display (clearing
the display works the same as updating a BAG TAG). Your BAG TAG should now be
cleared of any previous flight information.
Regulatory information
COMPLIANCE STATEMENT (PART 15.19)
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING (PART 15.21 )
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
RF EXPOSURE (OET BULLETIN 65)
To comply with CC RF exposure requirements for mobile transmitting devices,
this transmitter should only be used or installed at locations where there is
at least 20cm separation distance between the antenna and all persons.
MANUFACTURER PERFORMANCE SPECIFICATION
The BAG TAG device has been certified according to IEC 61000-4-3, the UHF RFID
scanning function of the Airport interface of the BAG TAG device could be
sensitive to radiated emissions between 600 Mhz and 700 Mhz resulting in
performance criterion B. After the influencer of the emissions in the afore
mentioned spectrum have stopped, the BAG TAG device will self recover its
functionality with respect to the UHF RFID scanning function without operator
intervention.
During normal operating conditions the afore mentioned emissions should not be
present in the environment where the BAGTAG is used with the UHF RFID scanning
function.
EUROPEAN UNION – DISPOSAL INFORMATION
According to local laws and regulations your product and/or its battery shall
be disposed of separately from household waste. When this product reaches its
end of life, take it to a collection point designated by local authorities.
The separate collection and recycling of your product and/or its battery at
the time of disposal will help conserve natural resources and ensure that it
is recycled in a manner that protects human health and the environment.
Questions? E-mail us at support@bagtag.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>